Replacement WD Shank for a 14,000-lb Equal-i-zer System


I have a 14,000 lbs equalizer hitch with the four points sway control and I need a longer do you guys have any


Expert Reply:

I have attached links to our selections of 2 inch and 2-1/2 inch Weight Distribution (WD) Equal-i-zer shanks that you can use with your 14,000-lb WD system.

The 2 inch WD shank that has the greatest range with a 13 inch Rise and a 9 inch Drop is part # EQ90-02-4400.

The 2-1/2 inch WD shank that has the greatest range with a 10 inch Rise and a 6 inch Drop is part # EQ90-02-4900.

If instead you meant the length of the shank itself we also have the Equal-i-zer shank part # EQ90-02-4500 which is 18 inches long (6 inches longer than the other Equal-i-zer options) and has a 7 inch Rise and a 3 inch Drop. Part # EQ90-02-4600 is also 18 inches long but has an 8 inch Rise and a 4 inch Drop. Both of these options are for a 2 inch hitch receiver.

I have also attached a helpful article about choosing the correct ball mount for your towing application. You can adapt it to your WD setup.

expert reply by:
Jon G

Products Referenced in This Question

Product Page this Question was Asked From

Follow up Questions

Similar Expert Q&A Pages

See More Q&A Expert Answers >>