How to Wire a Reverse Lockout Solenoid on a Titan Disc Brake Kit # T4843100

Question:

Hello i purchased the Brake Actuator w/ Electric Lockout and i am having an issue wiring this to make truck. My trailer has a 5 prong plug the colors are yellow, brown, green, brown, white ground, and red that is not connected to anything on the trailer it is just cap and stowed. I watched the video but i dont understand how he is wiring this?? Thanks

0

Expert Reply:

On the trailer side of your 5-Way flat plug, you should wire the red wire you mention to the electric reverse lockout function of the actuator on the Titan Trailer Brakes, part # T4843100, that you just installed.

You will basically run the red wire from the connector to either of the yellow wires that are coming out of the back of the # T4843100, and then ground the other wire anywhere on the frame of your trailer. Check out the 9 minute mark of the video I attached below to see how its done.

I also attached an FAQ article on trailer wiring below for you to check out also.

expert reply by:
0
Jameson C

Ask The Experts a Question >>


Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>