Is 7-Way Part # 118272 That Fits 2017 Ford Explorer Fully Functional

Question

Question:

Will this 7 way connector be fully functional on my 2017 ford explorer?

asked by: Mike

1

Helpful Expert Reply:

Yes, the 7-way trailer connector part # 118272 which is a confirmed fit for your 2017 Ford Explorer will be fully functional.

expert reply by: Jameson C

1

Answer 1

If your 2017 Ford Explorer has one of the connectors for the #118272 you have the other as well and it would be just a matter of looking further for it. I attached an install video for this kit on a similar 2017 Ford Explorer for you to check out…

view full answer...

Answer 2

Your 2016 Ford Explorer does include all the wiring needed to plug in a trailer connector. If you need a 4-way connector, the Tekonsha Wiring Harness #118540 is what you can use. This plugs in to the Explorer's wiring beneath the rear of the…

view full answer...

Answer 3

Since you have the square connectors on your 2012 Ford Explorer the easiest solution to add a 7-way is the part #118272 that you mentioned. For a more cost effective solution though we have the #37185 that allows your current 4-way to plug in and…

view full answer...

Answer 4

Installing a 7-way trailer wiring connector on your 2016 Ford Explorer is pretty easy actually. All you need is the part #118272 which plugs easily into a port under the rear of your vehicle. I attached a picture of what the connector looks like as…

view full answer...

Answer 5

For trailer wiring you would want the part #118272 but then would want to swap in the 4 and 7-way connector part #HM40975 which will plug right in and give you both connectors. Check out the install video I attached that shows this installed on a…

view full answer...

Answer 6

Based on my research, the Explorers with a factory tow package came out of the factory with either a 7-way trailer connector or a 4-way connector. If you want a 4-way connector, I recommend using the Tow Ready T-One Vehicle Wiring Harness #118540. I…

view full answer...

Answer 7

For what you are looking for what you need is the 7-way part #118272 which is a confirmed fit and will fit your vehicle regardless of whether it had the tow package or not.

view full answer...

Answer 8

Since your trailer is brand new I suggest a visit to the selling dealer or to another authorized service/repair center. Small parts such as light lenses are easy to replace and inexpensive, but troubleshooting the blown fuse problem is not. Finding…

view full answer...

Answer 9

Your picture didnt make it through. Could you email it to me? I wonder if maybe you found wrong connector.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Is 7-Way Part # 118272 That Fits 2017 Ford Explorer Fully Functional

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching