Question:
I have a 1996 Wilson tilt trailer. A single car hauler. Double axle. Do you have parts for it ? See attached pictures.
asked by: Angelo
Expert Reply:
Thanks for your pictures. They were extremely helpful! What you will want for your 1996 Wilson tilt trailer is the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2, # AKHD-545-35-EZ-K. This will give you all new bearings, races, and grease seal along with the grease hub. For a 5 on 5 bolt pattern, you will want the # AKHD-550-35-K.
You may want a bearing packer like # L70025 and some grease like # L11402. If you need the spindle nut kit, use #
RG05-100. The replacement spindle is # TRU74FR.
If you want to update your brakes while you are at it, I recommend the Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs, # AKEBRK-35R-SA and the left side # AKEBRK-35L-SA
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
LubriMatic Marine Trailer Wheel Bearing Grease - 14 oz. Cartridge
LubriMatic Deluxe Bearing Packer
Spindle Nut Kit for EZ Lube Axles
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
Follow up Questions