Recommended Base Plates Compatible with Roadmaster Tow Bar on 2016 Jeep Wrangler Sport

Question

Question:

What Base plate do we need for a 2016 Jeep Wrangler Sport. We have the all terrain tow bar.

asked by: Henry

0

Expert Reply:

As long as your 2016 Jeep Wrangler Sport has the standard front bumper then either the Roadmaster EZ4 # RM-521448-4 or EZ5 # RM-521448-5 will work with your Roadmaster All Terrain tow bar.

expert reply by: Charles S

0

Answer 1

It sounds like you have your system spec'ed out about perfect. The Roadmaster #M-676 Nighthawk All-Terrain tow bar will connect your 2020 Holiday Rambler to your 2016 Wrangler Unlimited if it has a Roadmaster EZ5 Base plate Kit #RM-521448-5…

view full answer...

Answer 2

In order to flat-tow a 2016 Jeep Wrangler you'll need a flat-tow wiring harness and for this you have a few options. These options included a set of magnetic lights such as the Heavy Duty Magnetic Tow Lights part #TL21RK or diode wiring kit that…

view full answer...

Answer 3

We do appreciate your patronage in the past, so thank you for that. To answer your question, the answer is-Yes. The Roadmaster Brake Lite Relay #RM-88400 is required for any braking system that physically pushes on the brake pedal like what the…

view full answer...

Answer 4

Yes, the Blue Ox Tail Light Wiring Kit #BX8869 will work on your 2016 Jeep Wrangler Sport but I recommend going with the Hopkins Custom Tail Light Wiring Kit #HM56200 instead because it tees in with the connectors for your tail lights instead of…

view full answer...

Answer 5

According to my research and what I read in an online copy of the owner's manual for your 2016 Jeep Wrangler Unlimited, your vehicle is capable of being flat towed without major modification. There are specific steps that must be followed…

view full answer...

Answer 6

Yes, if the supplemental braking system uses the brake pedal to apply your 2015 Jeep Wrangle's brakes, then you will need to wire in the Roadmaster Brake Relay, #RM-88400. The relay will keep your Jeep's brake light signal from overriding the…

view full answer...

Answer 7

The SMI Stay-IN-Play DUO Supplemental Braking System - Proportional #SM99251 when used on your 2016 Jeep JK will override the turn signal on your Jeep so you will need to add the #RM-88400 relay Kit. I've attached a couple of videos to help. It…

view full answer...

Answer 8

The Hopkins Custom Tail Light Wiring Kit #HM56200 will not activate the 3rd tail light on your 2017 Jeep Wrangler because it is created to keep from backfeeding into the wiring on your Wrangler. This is the same case for your license plate light.…

view full answer...

Answer 9

Inexpensive and supplemental braking systems aren't usually two phrases said in the same sentence. The best and most ideal solution is going to be the Blue Ox Patriot part #BLU37TR as it is easy to install/remove and works very well. The Blue Ox…

view full answer...

Answer 10

To flat tow your 2016 Jeep Wrangler what you need is a base plate kit. For that we have the part #RM-521448-4 which is a confirmed fit and would work well. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

view full answer...

Answer 11

The main difference between the Blue Ox Patriot and the Roadmaster Even Brake systems is that the Roadmaster #RM-9400 uses compressed air to actuate the brakes in the towed vehicle, while the Blue Ox Patriot II uses an electrically-operated actuator…

view full answer...

Answer 12

If you turn the ignition key of the Wrangler to the Towing Position, and you step on the brake pedal and the brake lights light up, you will have interference problems. I believe removing the stop light fuse would accomplish what you are trying to…

view full answer...

Recommended Base Plates Compatible with Roadmaster Tow Bar on 2016 Jeep Wrangler Sport

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching