View Cart

Using E-Track and Accessories in a 5 x10 Enclosed Trailer to Carry a Harley or an ATV

Question:

I have a 5x10 enclosed trailer and I want to set up the E track system to carry a Harley or an ATV. The floor is plywood with the steel trailer frame underneath. What would be the best way to set up the track to carry either, do I need to reinforce the floor. Thanks!

0

Expert Reply:

In order to secure either a motorcycle or ATV I recommend 2 sections of E-Track # E19135 so that you can have one on either side of the motorcycle. This will be the most stable set up for the bike. The ATV really only needs to use one of the tracks to be secured using a wheel net with E-Track fittings, # 77314.

For the motorcycle I recommend using at least 2 of D-ring # 59131, assist straps # 06303, and some ratchet straps such as # 34414. I have included some links to videos on these parts for you.

Reinforcing the floor is a good idea. Or you can get several backing plates, # BPEZ, to spread the force applied to the E-Track over a wider area. I would use at least 3 per E-Track section; one on each end and one in the middle.

expert reply by:
0
Michael H

Ask The Experts a Question >>


Products Referenced in This Question






Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>