Does the Equal-i-zer Weight Distribution System # EQ37101ET Include the L-Pin w/Clips EQ95-01-9430?

Question:

Hi, I am looking at getting the equalizer EQ37101ET hitch system as I need to get a different shank for additional drop. In some of the pictures, the L pins had the old style keys and in other pictures it showed the newer style L pin with clips EQ95-01-9430. I was wondering if you knew which this came with.

0

Expert Reply:

I was able to go out to the warehouse and check the # EQ37101ET weight distributions for you and I found that they all have the new snap pin like the image of the # EQ95-01-9430 you referenced.

The shank that offers a larger drop for the Equal-i-zer system that is compatible with a 2 inch trailer hitch is the # EQ90-02-4400. I have linked it to this page for you to check out. It has a gross trailer weight of 14,000lbs, a tongue weight of 600lbs to 1,400lbs, and an overall length of 12 inches.

The maximum rise will be 13 inches from the top of hitch receiver opening and a maximum drop of 9 inches from the top of hitch receiver opening with incremental adjustments every 1-1/4 inch.

It's important to note that you will need a thin walled 1-7/8 inch socket to attach the included ball. If you do not have one we offer the # ALL643216.

I have attached all the above mentioned products to this page for your viewing and purchasing convenience.

expert reply by:
0
Jackie C

Ask The Experts a Question >>


Products Referenced in This Question




Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>