Hub Bore Diameter of Trailer Hub and Drum Assembly AKHD-655-35-K

Updated 07/06/2016 | Published 07/05/2016

Products Featured in This Question

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased

(1130)

$84.55

Grease Cap - 1.988" Outer Diameter - Drive In

(1980)

$3.24

Question:

What is the diameter of the hub bore at the face of the drum? My wheels have a center bore of 77.8mm or roughly 3inch and i need hub to mount directly to wheel without clearance issues.

asked by: Brian K

Expert Reply:

The hub bore of Trailer Hub and Drum Assembly # AKHD-655-35-K is 1.980-inches and this allows a good fit with a grease cap like # F001518 which has a flange diameter of 1.988-inches.

expert reply by: Adam R