Would 2016 Subaru Forester Need Exhaust Turn Down When Carrying Cargo Carrier  

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…

You are definitely on the right track with your research and findings. If your 2018 Subaru Outback Wagon is listed for 200 lbs TW then even if you use a trailer hitch with a higher TW capacity, like the Draw-Tite #76227 with a 600 lb TW, you are…

I contacted Curt and the inside dimensions of the Curt Cargo Carrier for 2" Hitches part #C18113 are 49" long x 22-1/2" wide x 4" tall. That is the usable space inside the carrier according to the tech at Curt.

Though it does not come with one, you can absolutely get a locking anti-rattle bolt for the Curt Cargo Carrier for 2" Hitches #C18113. What you will need for this is simply the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches #63232.…

Actually, we do list the weight of our cargo carriers. On each product page, just above the 'add to cart' button, you'll see the shipping weight listed. The shipping weight includes the product itself, plus the weight of the packaging. In…

I was able to confirm with Curt that the Class III hitch part #C13400 will fit the 2020 Subaru Ascent. The installation is very easy without any drilling required however you may need to enlarge a couple of access holes in the frame with a file. I…

Sounds like you have a great trip planned. We have several hitch-mounted carriers to choose from that fit a 2 inch receiver opening. I have attached a link to all of the carriers we offer that you can take a look at. From my research I found that…

You can take a measurement to see if you have clearance when the Curt Cargo Carrier, part #C18113 is installed. The carrier basket outside height is about 5 inches. Since the shank portion is below the carrier, you would need to add about 2-1/2…

To my knowledge, none of the manufacturers offer cargo carriers in any finishes other than paint or powder coat. I would recommend getting this aluminum carrier #C18113.

For your 2009 Honda CR-V, I recommend the Draw-Tite trailer hitch #75547 because it's a Class-III rated hitch and it's easy to install. The cargo carrier I recommend is the Curt aluminum carrier #C18113 because it weighs only 29 pounds and…

You're right that there are a bunch of options so I can narrow it down for you, and for the best overall value for a hitch cargo carrier, I recommend a large, aluminum carrier: - 22-1/2 x 49 Curt Cargo Carrier #C18113 This cargo carrier's…

I have a solution for you, but if you check out the demo video I attached for the #63153 you will see that the railing of the carrier does interfere with the door opening all the way on a very similar Honda CR-V as yours. Instead the part #C18113…