Replacement Side Cranking 12K Bulldog Square Trailer Jack Leg
Question:
Drop leg replacement? Bulldog side crank 12,000 lb non spring leg. The leg has been damaged and needs replaced. I have removed all internal mechanism. Is there a way to remove the leg and install a new one? Is a new one available? Thanks.
asked by: Karl D
0
Expert Reply:
A drop leg on a jack will just be held to the inner leg with a pin such as # BD70129201. It sounds like the inner leg on your jack is damaged. That part is not available but you can replace the hole leg. We have 1 Bulldog square, side crank jack rated for 12,500 pounds and it is # BD182700.
expert reply by: Michael H
0
Products Referenced in This Question
Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 12,500 lbs
- Trailer Jack
- Side Frame Mount Jack
- Fixed Mount Jack
- Weld-On
- 10001 lbs or More
- Sidewind Jack
- 26 Inch Lift
- Drop Leg
- With Foot
- Bulldog
more information >
Bulldog Square, 18-1/8" Tall Drop-Leg Tube - 7,200 lbs to 10,000 lbs
- Accessories and Parts
- Trailer Jack
- Camper Jacks
- Legs
- Drop Leg
- 2-1/4 Inch Diameter Tubing
- Bulldog
more information >
Product Page this Question was Asked From
Replacement Screw and Nut Assembly for Bulldog Square Jacks - 10K TW
- Accessories and Parts
- Trailer Jack
- Camper Jacks
- Hardware
- Screws and Nuts
- Bulldog
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- Thread Measurements of the Bulldog Jack Square Jack Replacement Screw and Nut
- Option for a Damaged Nut and Screw in a 10k Bulldog Landing Gear Jack
- Will Replacement Screw and Nut Assembly BD500250 Fit Bulldog 10K Square Jack BD182304
- Replacement Screw and Nut for Bulldog 10K / 12K Square Trailer Jack
- Diagram of a 10k Bulldog Landing Gear Jack for Gear Replacement
- Replacement Screw and Nut Assembly for a Bulldog Landing Gear Set
- Is a Replacement Nut Available for Bulldog Jack
- How to Pick Out Bulldog Replacement Screw and Nut Kit for Bulldog Jack
- Solution for Broken Bulldog Jack on 1999 Cherokee Trailer
- Measurements and Material of the Replacement Screw and Nut Assembly for Bulldog Square Jacks
- Do Replacement Rod, Screw and Nuts for Square Jacks Only Fit Certain Jacks
- Replacement Screw and Nut for Bulldog 12k and 10k Trailer Jacks
- Bolt-On Side Mount Caster Wheel Tongue Jack to Replace Fulton 1000-lb Jack
- Replacement Brass Bushing and Rod for 12,000 lb Fulton Jack
- Replacement Screw and Nut Kit for Jacks
- Availability of Nut and Screw for Bulldog Jack
- Does Bulldog Replacement Screw and Nut Kit BD500217 Fit Jack Model 182304
- Replacement Trailer Jack Parts for WW Brand Cattle Trailer
- Replacement Nut and Screw for 4 Inch Square Bulldog Jack on a Gooseneck Trailer
- Replacement Nut and Screw for a Bulldog 10K or 12K Capacity Landing Gear Trailer Jack
- Bulldog Powered Drive Landing Gear Stops Lifting and Trips Circuit Breaker
- Handles Hard to Turn on Bulldog Jacks Installed on a Dock Ramp
- Replacement Nut and Screws for a Bulldog Landing Gear Jack
- Square Tube Drop Leg Jack Replacement Parts
- Replacement Internal Screw Availability for Bulldog Jacks