Distance Between Hangers When Using Hanger Kit part # APTT5 with 26 inch Long Trailer Leaf Spring  

Most trailer axles have a weep hole if water gets into the shaft but the main concern is getting water in the hubs. This can usually be eliminated by using a double lip grease seal. If you can measure the grease seal or read the part numbers you have…

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde AllTrek…

Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item #LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure…

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've…

The issue you are experiencing is a result of leaf springs that are too long for your hanger spacing. You will want shorter springs and I recommend also going with a capacity more geared toward your axles. You will want to use the Triple-Axle Trailer…

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33" axle spacing. Since your current spacing is 34" this kit should fit just fine with your current hanger spacing. I have attached a picture showing what this kit should look…

In order to determine the correct leaf spring hanger locations on a trailer you first need to position the axles correctly. I have attached a help article on this part of the process for you. Then, once the axles are correctly positioned you can then…

There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like #e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles…

The Triple-Axle Trailer Hanger Kit #APTT3 that you referenced is designed to work on axles with capacities of 2,000 lbs to 7,000 lbs so it should work very well for you. I attached a picture that has a chart that shows exactly how you should space…

Hello Mark, thanks for the picture. What you have there is a Lippert 3,500 lb axle and yes, the TruRyde Electric Trailer Brakes #TRU36FR are exactly correct for your 2019 Cherokee Grey Wolf 26dbh. The 3,500 lb axles all use the same standard 10"…