Trailer Hitch, Ball Mount, Hitch Ball, and Trailer Wiring for a 2005 to 2009 Land Rover LR3


Will this fit an LR3? If so how?


Expert Reply:

The Curt Trailer Hitch, # 13456, will fit 2005 to 2009 Land Rover LR3 models. I have included a link to the installation instructions below. This hitch bolts into place on the frame of the vehicle. You will need to temporarily remove the spare tire to have room to install the hitch. There is no drilling involved but you will have to fishwire bolts into place. I have included a video explaining the fishwire technique.

If you plan on doing some towing with your LR3, I recommend adding a ball mount, hitch ball, and trailer wiring. The recommended ball mount is # 2753, and you can use hitch ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63853 (2-5/16 inch diameter).

For wiring, you will need to use the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, # 119179KIT.

expert reply by:
Michael H

Ask The Experts a Question >>

Products Referenced in This Question

Product Page this Question was Asked From

Similar Expert Q&A Pages

See More Q&A Expert Answers >>