Trailer Coupler Hinge Kit Recommendation for 3 inch by 3 inch Channel that is 1/4 inch Wall
Question:
I have a trailer tongue that is 3 x 3 with 1/4inch wall thickness. I see your specs only reference up to 3/16. Will your product work on my trailer, or would a weld on be better? Thanks
asked by: William R
0
Expert Reply:
Since the channel of the tongue of your trailer is thicker than what the bolt-on kits recommend you would want to use the weld-on kit part # FHDPW330300 for your 3 x 3 inch trailer tongue to provide a hinge kit for it.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Trailer Tongue - Weld On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Weld-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Q&A: Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake Actuators
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Q&A: Recommended Replacement for a Fulton A60 Surge Brake Actuator
- Q&A: Surge Brake Actuator Recommendation to Replace Fulton A60 on Trailer
- Q&A: How to Select the Proper Length Safety Chains for a Trailer
- Q&A: How to Determine the Correct Replacement Hubs for a Boat Trailer
- Q&A: Should I Use a Bolt On or a Weld on Fold Away Coupler On a Shorelander Trailer with 3x3 Frame
- Article: Best Boat Trailer Jacks
- Article: Where to Position the Trailer Axle?
- Article: How to Mount a Truck Bed Camper
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Galvanized vs. Aluminum Trailers