Replacement Follow Landing Gear Leg for Venture Landing Gear on 2000 Keystone Mountaineer 5th Wheel  

Yes we have confirmed for sure that the #LC119102 is the exact same as the LC241846 and would work for you.

In order to find the correct replacement landing gear leg for your Open Range 430RLS 5th wheel trailer I would need to know the brand and part number of the landing gear leg you currently have on your trailer. These should be stamped or etched into…

The Lippert Landing Gear Leg model LCI PN241846 on your landing gear system refers to the Lippert Heavy Duty Landing Gear Master Leg #LC241846. For a repair kit that will work nicely with this leg, you can use the Lippert Lead Leg Repair Kit…

The difference is the height; the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg #LC179013 and Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" #LG-179013 is the lengths. The Stromberg-Carlson…

If the replacing the gear box didn't fix the problem, then as long as the internals of the legs themselves are still in good shape replacing the motor would be the next logical step. Before doing that, I'd use the crank to operate the landing…

The leg you need is the part #LC179014. This is a replacement follower leg that will fit your 2003 Keystone Challenger and has a 4,000 lb capacity.

Atwood is no longer making parts as they were bought out. Lippert Components did buy the landing gear portion of that company and they are giving you the correct replacement part number for your system and we do not carry that part. I can definitely…

Based on the model number you listed the correct replacement motor you would need is the #LG-142178. It is an exact replacement for your Venture motor so it would bolt right up. I wish we had something heavier duty but at this time we do not have…

The only way I can help is with a complete replacement option as when Lippert bought out Atwood they discontinued the Atwood Leveleg parts so a replacement controller is no longer available. Instead I recommend replacing your system with the Lippert…

There may be model information under one of the caps at the top of one of the legs. If it is electric landing gear then usually the motor will have some information on it that can be used to identify the system that you have. If the outer most jack…

We have found that the Replacement Motor #LG-142178 that you referenced is indeed compatible as a replacement for your existing Atwood 75722 motor.The only thing I recommend doing is verifying that the legs on your motor aren't flush with the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.