Spacing of Mounting Holes for Stromberg Carlson Scissor Jack # JSC-24-IND
Question:
Looking at the JSC-24 Scissor Jacks, wondered what the bolt spacing is on the 2 bolts that are used to bolt up the the mounting bracket. Im looking at replacing a pair on my trailer, and my existing mounting brackets are welded on, so keeping the existing brackets would make my life easier, so to speak! My current ones just say J-2500inch on them, no brand. Thanks!
asked by: Kevin W
0
Expert Reply:
To determine the measurements you were looking for, I went into our warehouse and measured the Stromberg Carlson Scissor Jack # JSC-24-IND. The spacing of the small, circular holes on the outer edge is 1-1/2 inches. The diameter of the hole is 5/8 inches. The spacing of the larger rectangular holes is 2 inches x 1-3/4 inches. The diameter are 7/16 inches wide by 3/4 inches long.
I have provided a graphic showing all the dimensions.
click to enlarge
expert reply by: Chris O
0
Product Page this Question was Asked From
Leveling Scissor Jack - 24" Lift - 5,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 4001 - 5000 lbs
- Scissor Jack
- 24 Inch Lift
- Bolt-On
- Weld-On
- 1 Jack
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Can ARK Stabilizer Jacks Rotate 180 Degrees
- Replacement Scissor Jack for 2014 R-Pod Camper
- Where to Install Stromberg Scissor Jacks on Trailer Frame
- Dimensions of Leveling Scissor Jack # JSC-24-IND
- Scissor Stabilizer Jacks For 2019 Aspen Trail 2480RBS
- Dimensions of Mounting Holes for Stromberg Carlson Scissor Jack # JSC-24-IND
- Are Replacement Parts For Scissor Jack Available
- Mounting Dimensions for Stromberg-Carlson Leveling Scissor Jack # JSC-24-IND
- Solution for Reducing Movement on Parked 2005 Trail Vision R Trailer
- What is the Overall Length of Leveling Scissor Jack # JSC-24-IND when Fully Retracted
- Dimension of Bolts Holes for Mount Connection on JSC-24-IND Scissor Jack
- Can Scissor Jacks be Bolted or Welded On and Do They have to Face a Certain Way
- Can Trailer Scissor Jacks Be Installed on Front of Jayco Travel Trailer
- Spacing of Mounting Bracket Bolts on Stromberg Carlson Trailer Leveling Scissor Jack # JSC-24-IND
- Does Mounting Hardware Come With Leveling Scissor Jack
- Installation of the Trailer Scissor Stabilization Jack Angle
- Scissor Jack Replacement for Puma Travel Trailer
- Stabilizer Jack Recommendation to Prevent Movement When Walking in Camper
- Nut Size Used to Raise and Lower the Stromberg Carlson Scissor Trailer Jack # JSC-24-IND
- Need Scissor Jack with Mounting Holes on Top and Bottom to Raise and Lower a Frame
- Can Welding On Stabilizer Jacks to RV Damage Electronics
- Determining Which Leveling Scissor Jack Fits A 2017 Rockwood HW276 Tent Camper
- Can Ultra-Fab Speed Socket Power Drill Adapter be Used with Stromberg Carlson Scissor Jack
- Can the Top Mounting Bracket on Stromberg-Carlson Scissor Jack # JSC-24-IND Be Rotated
- Cost and Availability of Stromberg-Carlson Leveling Scissor Jack Set # JSC-24
- Stabilizer Scissor Jack with 5000lb Capacity and 24” Lift For Use With Power Drill