Arrives before Christmas 
3" Wide wobble roller replaces 1 worn-out roller on your Load Rite boat trailer's roller bunk. Thermoplastic rubber outlasts traditional rubber and won't mark up your boat. Ribbing provides extra traction for slippery hulls.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Instructor Today we're gonna be taking a look at the Yates Ribbed Wobble Roller for load right boat trailers. That's going to replace one of your wobble or rocker rollers on the roller bunk assembly of your boat trailer. And like the name suggests this is designed for use on load, right boat trailers. Now the rib design here, you can kind of see it there from the side, these ridges, all along, that's going to give you some additional traction on the whole of your boat. So it's gonna be really helpful when you're pulling it up out of the water and the hole is maybe slick or slimy. It's going to give you that traction that you need to help get it up there.
It is designed and constructed of CPR or thermal plasticized rubber and material is going to be non-marking, non-scratching. It's gonna be a little bit stronger and more durable than traditional rubber, but also softer than polyurethane. So it's gonna be a really good material. It's gonna hold up really well. This is made in the USA and it has an inch and a quarter diameter shaft right here in the middle.
And then for our overall diameter here, we're gonna be sitting right at five inches. And for the width of our roller here, we're gonna be right at three inches and that'll do it for a look at the Yates Ribbed Wobble Roller for load right boat trailers..
Average Customer Rating: 4.9 out of 5 stars (319 Customer Reviews)
3" Wide wobble roller replaces 1 worn-out roller on your Load Rite boat trailer's roller bunk. Thermoplastic rubber outlasts traditional rubber and won't mark up your boat. Ribbing provides extra traction for slippery hulls.I am extremely pleased with the rollers I received from my load rate trailer actually was a perfect fit. I tried other rollers and they were the wrong product. I finally found you guys online. I’ll be an adamant customer if I need any more. Thank you very much
I've never had a bad experience with etrailer. keep up the good work.
Restored a trailer for a Sirius 22 sailboat. Given the age of the boat and original trailer, etrailer was the only place I could find the 1" diameter shaft wobble rollers. Trailer 1 year on and the wheels work great!
Great follow up on orders. Parts were back ordered. etrailer sent updates almost daily reassuring me the parts were on the way. Would definitely order from etrailer again. Everything arrived.
I am restoring a 1993 VM trailer that came with a Sanger DXII I recently purchased. I needed to replace the trailer rollers, and found your site had the same exact part that was used by VM originally. I order them and they were delivered in one day.
Great availability, price, and service. Thumbs UP!
Dave (On Table Rock Lake)
This roller was an excellent replacement for the worn rubber rollers on my Shoreline Trailer. My 21' Chris Craft was difficult to get on and off the trailer because the old rollers were being crushed under the weight of the boat. After replacing the first 16 rollers my boat rolled easily on and off the rear section of the trailer. So needless to say I am ordering 16 more for the front section. The slightly larger diameter seems to help also. I am extremely pleased with this roller and highly recommend it for anyone experiencing similar issues. Also they look great.
Replaced the rollers on my Karavan trailer with 60 new Yates ribbed wobble rollers from etrailer, installation was easy and quick, roller wasn't Karavan brand but met the specs and works perfect. May be too early to say but based on what I see of these new rollers I expect them to last a long time .
We replaced all of the Wobble Rollers on our trailer. The yellow plastic doesn't mark up the bottom of the boat like the original black rubber ones did. The hub of the Yates rollers is a little longer that the original rollers so instead of one washer one each side, only a single washer would fit.
Great product it really modernizes my EZ loader trailer. I was able to replace my back ones with my boat on the trailer. The front rollers are 1 1/8” shaft with c-clips and the rear ones are 5/8” shaft. I
replaced the front washers 1 1/4” x 16 outers only and the rear rollers 32 of the 5/8” shaft with 64 new washers. I also found with the rear rollers I had to
Shave the plastic spacers about 1/8” Everything looks great. Takes 15 years off the trailer Great Product and would recommend to everyone wanting to update their trailer and not have to deal with those ugly black marks the old rollers can leave behind. Hope this is helpful.
Measured and ordered the parts to replace the rollers on my EZLoader trailer. Shipment showed up super fast and was able to get it done right the first time. There is a helpful video on you tube that shows how to install these rollers. My boat now glides on and off my trailer!
Thank you for the great service!
Trevor W at etrailer was a great help in selecting the correct product for my trailer. The quality and ease of installation updated the trailer to new condition.
Great people to talk to when I call,and any problems with wrong items,,,,they're always glad to make it right... thank you all at etrailer...appreciate it
I had to order 40 of these for my trailer. They did not have enough in stock but work quickly to fill the order and maintained clear communications throughout the process. They actually showed up sooner than expected. Product is exactly what I needed!
Very nice rollers. Fit perfectly. Put on ez load needing 1 inch rollers and these did the job without using an extra bushing. Shipping was super fast. Very friendly staff to deal with.
My order arrived promptly, with no issues. I look forward to their installation, come springtime and hopefully some years of good usage.
Got your email before I opened the box. Just came today.Sooner than expected. They are the absolute finest black rollers I have ever owned. Match old ones perfectly.
If I could only figure out how to fit them on my '65 Scout.
I got some before and after pics for you here of my 1988 EZ LOADER carrying a 1991 SeaRay 200-BR.
I got some before and after pics for you here of my 1988 EZ LOADER carrying a 1991 SeaRay 200-BR.
4 1/4 inches rubber wobble wheels. Easy to change. I cant wait to put my boat on them. Excellent product
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.