bing tracking image
  1. Trailer Wiring
  2. Bargman
  3. Trailer Connectors
  4. Trailer End Connector
  5. 7 Round - Blade
  6. Plug and Lead
Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End

Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End

Item # WG54006-043
Retail:$59.98
Our Price: $47.06
Trailer Wiring
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This molded, 7-way, RV-style, trailer-end connector allows you to connect your trailer to your vehicle. Coiled cord extends to 6' and then contracts conveniently for storage. Great Prices for the best trailer wiring from Bargman. Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End part number WG54006-043 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (124)
  • Q & A (0)
  • Photos

Bargman Trailer Wiring - WG54006-043

  • Trailer Connectors
  • Trailer End Connector
  • 7 Round - Blade
  • Plug and Lead
  • 6 - 10 Feet Long
  • Bargman

This molded, 7-way, RV-style, trailer-end connector allows you to connect your trailer to your vehicle. Coiled cord extends to 6' and then contracts conveniently for storage.


Features:

  • Pre-wired, 7-way, blade-style, molded plastic, trailer-end male plug allows you to connect your trailer to your vehicle
  • Coiled cord can expand to 6' yet still contract to prevent dragging and tangling
  • Molded cord is resistant to water, oil, and chemicals


Specs:

  • Wire gauges:
    • 14-Gauge: green, red, brown, and yellow
    • 12-Gauge: blue
    • 10-Gauge: black and white
  • 3-Year limited warranty


Wiring Code
Molded Connector Function Usual Trailer Wire
White Wire Ground White Wire
Red Wire Left Turn and Brake Yellow Wire
Brown Wire Right Turn and Brake Green Wire
Green Wire Tail Lights Brown Wire
Blue Wire Brake Power Blue Wire
Black Wire 12 Volt (hot lead) Black Wire
Yellow Wire Reverse Lights -



54006-043 Bargman Coiled 7-Way Molded Trailer Wire Connector, 6' Long





Customer Satisfaction Score:


Customer Reviews

Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End - WG54006-043

Average Customer Rating:  4.8 out of 5 stars   (124 Customer Reviews)

This molded, 7-way, RV-style, trailer-end connector allows you to connect your trailer to your vehicle. Coiled cord extends to 6' and then contracts conveniently for storage.

by:

I had to replace the old 7 wire cable because the male plug had been pulled off. I chose the WH54006-043 coiled cable. I used a 1/2 inch clamp to hold the cable up at the box and a Connect-to-Protect to hold up the male plug. The result Is clean and tidy. Thank you,

Philip W.

9/14/2020

I first bought the 6ft coiled cable but the tension was just to great to stretch 6ft. I then replaced the 6ft. cable with an 8ft. cable. Less tension but when turning it really needs to be a 10ft. cable. I did not see a 10ft cable for sale nor have I found one. E-trailer, let me know if you get 10ft cable’s. Otherwise the coiled cable’s are great. See my old photos.



by:

This should work great, installation is still on my to do list.



by:

works great for my trailer



by:

I love having this coiled wiring plug on my trailer. the trailer gets towed with several different vehicles which have their plugs various distances away from the hitch ball. It's so nice to be able to reach the plug wherever it is without worrying about the cord dragging or having to wrap it around something when I don't need that much length.

Wiring it up was easy, although I seem to recall that the wire colors don't match the standard that you see most places. That was a very minor hurdle to overcome.

A year after install, it's still working great. I'd definitely buy this again if I was wiring another trailer.



by:

I just opened up my new Class 5 Curt XD hitch and have not yet installed it so my comments are based on first impressions only. It is very heavy duty - and heavy at 40 lbs. - made of extremely thick metal and outfitted with quality Grade 8 bolts with square necks so they won’t turn when torquing on the nuts to attach the main tube to the side mounting plates. My bolts are plated yellow (which I like) rather than silver as you may have seen in some online photographs. It is substantially beefier than my existing Grade 4 hitch and superior in every way. It’s an impressive piece of hardware. I cannot imagine anyone being disappointed with it on specifications, quality, strength, and general appearance. It’s a beast. What I AM disappointed in is Curt’s packaging and the condition in which the hitch arrived. (This is NOT a reflection on etrailer.com as the hitch arrived in Curt’s original packaging.) The unassembled main tube and the two side mounting plates come bundled together with nothing separating them but shrink wrap. No cardboard, plastic, even paper coming between the metal surfaces - just shrinkwrap probably not even a couple of mils thick. With basically metal-to-metal contact in an oversized-box with the bundle jostling around, it would be a miracle if there were no scratches, gouges, or some type of damage to at least one piece, which is exactly what happened to my hitch. The main hitch tube, on the exterior facing plane, on the driver side where I’ll see it every day, has some gouges on it that go through the powder-coating to bare metal. I can - and will - paint them to prevent rust (and, therefore, have to paint the whole hitch to match). But the gouges will still be noticeable as they go through the thicker, pebbly, powder-coat finish and will undoubtedly still appear as depressions in the surface even once painted. I fully realize this kind of surface damage will almost certainly happen with regular usage of the hitch anyway and that it’s certifiable to demand absolute perfection in anything. But if you are someone who cares about the aesthetics of your equipment and keeping it looking new for as long as possible, it is very disappointing to receive such an expensive and prominent piece of hardware damaged right out of the box and requiring immediate repainting. The plastic parts bag had also ripped open in transit, with nuts, bolts, shims, etc. rattling around in the box. I am dumbfounded that Curt packages such a high-quality piece of equipment so shoddily where such damage is virtually unavoidable. I bought from Curt solely due to their being an American manufacturer and to support American workers so this is doubly discouraging. It’s a trivial complaint in the big scheme of things and not worth demanding a replacement over. Just be aware that unless Curt changes their packaging practices it is very possible you will have the wind taken out of your towing project sails just as I have. Again, this in no way reflects on etrailer. My experience to date with etrailer (website, educational resources, staff reviews, ordering, tracking, email contact, etc.) has been beyond exemplary in every way. They rank as a Top Five online retailer in my opinion, maybe even the best.



by:

Perfect as always, thank you!



by:

Works as advertised.



by:

color code is incorrect 4 of 7 wires are connected to wrong terminal on plug

Etrailer Expert

Jenny N.

4/11/2023

With this harness the wiring code may not be what you expect. Please see the wiring code table on the product page as it shows what the color and function is versus what the trailer wire is.



by:

Excellent product excellent service



by:

I ordered all the parts required to safely flat tow out 2017 Jeep Cherokee Trailhawk from etrailer.com. The only part they didn't have was the Mopar Flat Tow Enhancement kit Jeep requires to flat tow this model.

Ordering from them was great, the website is easy to use and I was able to locate all the pieces compatible with my specific vehicle. The expert recommendations help my decision choosing the right parts. I ordered from etrailer even though I found some of the parts on other websites a little cheaper. I chose to pay a little more because of all the effort etrailer has put into installation videos and guides. I was very pleasantly surprised to learn from etrailer that they have a price match guarantee!

So my equipment consisted of the following

Mopar Flat Tow Enhancement Kit (from Jeep)

Roadmaster Battery Charge Line Kit for Towed Vehicles

Mighty Cord 7-Way RV Style Trailer Connector - Trailer End

WesBarg 7-Way, RV-Style Connector w/ 6' Long Coiled Cable Trailer End

Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End

Hopkins Custom Tail Light Wiring Kit for Towed Vehicles

SMI Stay-IN-Play DUO Supplemental Braking System

Roadmaster Brake-Lite Relay Kit for Towed Vehicles

Blue Ox Alpha Tow Bar - Motor Home Mount - 6,500 lbs

Blue Ox Base Plate Kit - Removable Arms

Blue Ox Tow Bar Cover - Aladdin, Aventa LX, Aventa II


The installation videos are great but not all inclusive. Take the time to read the instructions that come with the parts. This is a major project, I took about 30 hrs over a full week but as you'll see in the pictures I took s few extra steps to make a cleaner look.

Some of those extra steps:

The base plate install requires the bumper be modified cutting off a flange on each side, I spray painted this to prevent corrosion.

In the install video of the baseplate on the drivers side they use an extra quick link (not included) to run the safety cable around the wiper fluid reservoir. I took the time to remove it and run the safety cable behind it.

I didn't want our nice new vehicle to look like it can be towed so I played the brake away switch and 7 way trailer plug behind the license plate, so when not being towed our vehicle looks great!

Some things to be aware of. The Brake air cylinder that mounts to the brake pedal with four bolts may need longer bolts, it did on our Jeep. Spend the money for weather tight heat shrink crimp fittings. The Hopkins wire harness was about 1.5 feet short to get to my plug location. Buy extra zip ties, electrical tape and split loom.

I recommend reading all the various installation manuals and watching all the videos because the various components integrate together and if you install one at a time you'll be doing a bunch of extra work.

The brake light relay is a real pain in the butt, not because of the hardware but because of the location of the brake light switch which is very hard to get to.

Overall I am very happy with the products and how the installation looks. We haven't towed it yet but do not expect any problems.






Roy

7/30/2018

Still very happy with our purchase. We’ve towed over 10k miles and have had zero issues with our tow setup. I’ve shared my experience with several other RVrs and recommended your company for their needs. Thank you



by:

Just what I needed to wire up my tow vehicle

John M.

8/26/2017

fantastic product



by:

I use this product as an extention from my truck to my camper. I needed something to take up the slack so wiring wouldn't drag on the ground but still be able to stretch while turning corners. Works great!

Curtis G.

4/24/2018

Working great. I can connect and disconnect my trailer quickly.



by:

I bought 4 Magnetic Trailer brakes (Hayes/AL-KO 12" x 2" Electric Brake Assembly) which were a breeze to install. While testing the brakes I found that one of the four magnets were not properly engaging. I quickly called etrailer's customer care and they were able to replace the whole assembly. I was relieved to find that the replacement worked normally. Overall, all the products that were purchased were high quality and fit my needs. Thank you etrailer, and I look forward to doing business with you guys again :)



by:

This is the second coil wire I have purchased, its a great product! It would be helpful to include a wire diagram as its different than most 7 pin color wire configurations but easy to find on the etrailer site.

Robert

1/14/2019

They are both excellent products, I highly recommend them to friends and coworkers. Not often I find well made products and great customer service in the same place.



by:

I gave this coiled trailer cord set a 5 star rating because of the quality of construction and that the individual conductors appear to have a fine stranded construction that will take numerous extensions and retractions. The receptacle cord cap looks to be durable, but only time will tell on that point. The hot (+ black) and the ground (- white) conductors look to be a size 12 gauge and the (Blue) electric brake conductor looks to be a size 14 gauge size. The others are probably a size 16 gauge wire. The cord is heavy so your plug cap needs to be fully latched to the stub sticking up on the plug or it may pull out. Also I purchased the 6 foot one and now wish I had purchased the 8 foot version because of the high strength retraction capabilities of the cord, but that is my issue not the cords.



by:

After wiring 7 wire coiled plug pigtail into new breakaway battery box , utilizing two 5/8” wire/hose routing clamps to secure pigtail to trailer frame for specific routing application to reduce recoil pressure of plugin from vehicle plug outlet , it works great with adequate length of cable for any sharp turns .



by:

My cable just came in and I'm really looking forward to installing it on my trailer today. This is clearly high quality, with a thick, durable jacket and a molded-on connector that should prevent wire strain at the terminals. Heavy, 10 gauge wire means strong transmission of power to the lights and brakes, and having the wires coiled means no more dragging on the ground! Definitely an upgrade for my trailer!



by:

There might be 6 feet of wire in this, but about 3 feet is the max it is going to stretch without breaking something at one end or the other. Seems to be good quality other than that.



by:

Used this product to replace the damaged cable on my dump trailer. Very good quality connector. Stays flexible in the cold weather.



by:

Been looking for one of these for a while to keep from winding excess cable around jack or possibly dragging it on the pavement. A friend told me about etrailer and I saw it and had to order one. Great quality and works perfectly. Great company to order from.



by:

Replaced straight pigtail with this one and it don't get caught on anything in bed and stays plugged in.



by:

Works great! I accidentally ordered an RV plug for a dump trailer and had to match the wires by continuity rather than color, but product works very well.



by:

Item is exactly what I was looking for. I had destroyed three cords by dragging the middle of the cord on the road when it slid through my 5th wheel tailgate. This item stops that problem dead in its tracks.



by:

I gave this item only one star for the following reason. I was not able to use the product because the wiring was too short and pulled out of the socket when making sharp turns. rather then adding additional wires I gave it to a friend.



by:

Replacing my straight cable with a 6' Long Coiled Cable on my boat trailer was easy to install and will keep the cable out of the way when unplugged.


25
124
Show More Reviews

See what our Experts say about this Bargman Trailer Wiring

  • Parts to Make Dual 7-Way Extension for Motorhome That is Flat Towing
    It sounds like you need an extension with two 7-blades on it, but in order to do this you will need to get a plug and lead as well as a plug. So you will need the 7-Way Molded Trailer Wire Connector # H20043 (4 feet long) or the coiled Bargman # WG54006-043 (6 feet long) and will need to wire in the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706. You can match the colors of the wires on the 7-way to the pins of the plug to make it very simple. I have added links to...
    view full answer...
    Image 1 for
  • How Long is the Cord # H20043?
    The Bargman 7-Way Molded Trailer Wire Connector # H20043 is 4 feet long. We also have the coiled 6 foot # WG54006-043 and the coiled 12 foot # WG54006-046 if you prefer a coiled cord.
    view full answer...
    Image 1 for
  • Is WesBarg 7-Way, RV-Style Coiled Connector Long Enough for Junction Box 2-1/2 Feet Back on Trailer
    If the junction box is 2-1/2 feet back from the front of the trailer then that would leave just 3-1/2 feet of the coiled cable # WG54006-043 to go from the front of the trailer to the vehicle and still have slack to make turns. That might not be long enough so I would add some additional wire, such as # DW04914-1, sold by the foot, to ensure there is enough slack.
    view full answer...
    Image 1 for
  • 7-Way Male to Female Extension Cord That is Expandable
    While our typical 7-way extensions like the Curt Universal 5th Wheel/Gooseneck 7-Way Extension # C56080 are a straight cable you can make an extension with a coiled cable. We have the Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable # WG54006-043 or 12' Long Coiled Cable # WG54006-046 that you can wire to a Curt 7-Way RV-Style Trailer Connector # C58155. The coiled cable will help protect the cord from dragging but gives you the expandability of its length. I have included a wiring...
    view full answer...
    Image 1 for
  • 7-Way Plug For 2010 Ford F-250 Super Duty Factory Tow Package and Trailer Side Connector
    I recommend Hopkins 7 and 4-pole trailer connector socket part # HM40975 for the factory tow package on your 2010 Ford F-250 Super Duty. This Hopkins trailer connector plugs into the OEM tow package wiring harness. I have attached an installation video for your reference. For the trailer side, I recommend Bargman part # WG54006-043 7-Way Molded Trailer connector. I like the Bargman 7-Way Trailer connector because it is coiled so it's less likely to get tangled or drag the ground. I have...
    view full answer...
  • 7-Way Trailer Wiring Connector to Reach 6 Feet from Junction Box to Vehicle
    Stretching the 7-Way Trailer Connector # WG54006-043 to 6 feet isn't the best option for you. It'll reach 6 feet but the coils are fairly tight. I extended it easily to about 4 feet but beyond that it wanted to fight me. It'll loosen up over time of course but I think a longer cable would be better for you. The 12 foot, part # WG54006-046, is a better choice, but then it'll hang lower to the ground.
    view full answer...
    Image 1 for
  • Recommended Electric Trailer Jack For a Boat Trailer Without Needing a On Board Battery
    For ease of installation and use I feel the Fulton XLT Powered Drive Trailer Jack # F141401 is going to work the best. This will bolt to a frame up to 3" wide and 5" tall so you will not need an adapter like you will with a A-Frame jack since you don't have the hole for it already. The 8" drop leg will greatly decrease the time it takes to raise your trailer. We do not test all the jacks for noise and speed as they can be different depending on the amount of load put on the jacks. The jack...
    view full answer...
  • Wiring Needed to Install Tekonsha Prodigy P2 Brake Controller on 1996 Isuzu Trooper
    The Universal Wiring Kit # ETBC7 that you referenced is indeed what you need to install a fully functional 7-Way on your 1996 Isuzu Trooper so that you can install the Tekonsha Prodigy P2 Brake Controller # 90885 to power the trailer's electric brakes. It is okay that the wire colors for the included 7-Way connector do not match up to the wire colors used on your trailer. The pins on the connector will still match up to the pins on the trailer's 7-Way connector with regards to function....
    view full answer...
    Image 1 for
  • Dimensions of the Wesbarg Coiled 7-Ways
    I went and pulled the WesBarg 7-Way # WG54006-046 and the # WG54006-043 from our warehouse to grab the measurements you requested. The coil diameter on both is 2-1/2 inches. For the 6 foot version part # WG54006-043 the length of just the coils is 8-1/2 inches and if measured from end to end with the coils unstretched it measures 27 inches. For the 12 foot long version the coiled portion is 19 inches long and from end to end measures 3 feet unstretched.
    view full answer...
  • Parts Needed For Wiring Electric Brakes On a Tow-it-All Car Dolly
    Since your Tow-it-All car dolly has electric brakes you will need to have a 6-pin or 7-way blade connector for your dolly. With electric brakes you are required to have a Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 connected to a charge line. This will activate the trailer brakes in the event of a breakaway. Here is a list of all parts you will need. Bargman 7-Way, RV-Style Connector # WG54006-043 etrailer Trailer Wiring Junction Box # 3430001-JBK Bright Way Push-to-Test Trailer...
    view full answer...
  • Availability of an RV Style 7-Way to 7-Way Extension
    If you want to use # WG54006-043 then you just need the vehicle end, such as # PK12-707E, since it already has the trailer end on it. We have some ready-made 7-Way extensions that you can use such as # 20027 or # C56080 which are 7 feet long. We have a shorter option, # TLW6021, which is 21 inches long. And we have a 10 foot long model # TLW6510.
    view full answer...
    Image 1 for
  • Installing Electric Brakes on a Vehicle Tow Dolly
    You have a 3500 pound axle, with a 4-bolt axle flange, spaced 4” apart each. You also have tires and wheels with a 5 on 4.5 bolt pattern. To put brakes on your West Texas Dolly # WTD-35D you will need a left and right trailer brake kit like the etrailer # AKEBRK-35 rated for 3,500 pounds, and 10” x 2-1/4” brake pads. Mounting bolts are included but nuts and lock washers # BRKH10B are not. If it were me I would purchase the etrailer # AKEBRK-35-SA self adjusting brakes so that I would...
    view full answer...
  • Recommended 7-Way Round Trailer Connector And Wiring
    If you are looking for a round connector with a 7-way blade I recommend part # H20046. This is a trailer end connector with 8 ft molded wire. For a 7-way with 6 ft of molded wire you need part # H20044, and for the connector with 4 ft of molded wiring you need part # H20043. for a connector with a coiled wire I recommend the WesBarg 7-Way, RV-Style Connector, part # WG54006-043. This has 6 ft of coiled wire attached. If you are looking for a 7-way with round pins we do not offer a 7-way...
    view full answer...
    Image 1 for Image 2 for
  • Is There a Junction Box and 7 Way Connector Available With a Coiled 7 Way Instead of Straight
    I may have a solution for you, but there is not a Junction Box with 7 way connector like the # HS381-9000 available with a coiled connector. However you could use the junction box from the kit # HS381-9000 and then add a coiled 7 way like the Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End # WG54006-043 to create your own junction box and 7 way that would work in the same manner; it'll just be a tiny bit of extra work making the initial connections since they're...
    view full answer...
  • Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
    The Bargman 7-Way, RV-Style Connector # WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will often vary between manufacturers. The important thing is to match up trailer and vehicle wiring based on their function. The pin locations and their functions should match up between this connector and the vehicle side Hopkins # 37185 that...
    view full answer...
    Image 1 for
  • Need A 7-Way to 7-Way Cable To Fit Between My RV and 2015 Jeep Wrangler Unlimited While Flat Towing
    Sounds like you need a 7-way to 7-way wiring cable to connect your 2015 Jeep Wrangler Unlimited to your RV when flat towing. You will need a 7-way plug and lead wire and a 7-way connector end. I recommend the WesBarg 7-Way, RV Style Connector # WG54006-043 and a Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706. You will have to wire the Pollak connector on the other end of the WesBerg cable to connect your RV and Jeep. I like the coil design of this cable because it...
    view full answer...
  • Parts Needed To Install Electric Trailer Brakes On Nationcraft LLC 6x12 Enclosed Trailer Single Axle
    To upgrade your Nationcraft LLC trailer to electric brakes you will need the following parts. Electric Trailer Brake Kit # AKEBRK-35-SA Qty 1 Trailer Hub & Drum Assembly # 84546UC3-EZ Qty 2 Trailer Wiring Junction Box # 3375601101 Qty 1 Bargman 7-Way # WG54006-043 Qty 1 Ring Terminal # DW05702-1 Qty 8 Ring Terminal # 44-5310A Qty 6 Trailer Breakaway Kit # 3802346 Qty 1 You will need to determine how much 12 Gauge Wire # 12-1-1 you will need to run to both the brake assemblies from where...
    view full answer...
  • Can 2020 - 2021 Ford Explorer Be Flat Towed Behind RV?
    I spoke with some of the manufacturers that make flat towing parts and they said that since Ford does not allow flat towing on the 2020 or 2021 Ford Explorer, they will not be making base plate kits for them. If your Explorer is front wheel drive you could use a towing dolly like the Roadmaster # RM-2050-1 tow dolly with electric brakes. This dolly features easy drive-on loading. The dolly comes with an attached flat 4-pole connector installed and a loose wire for the brakes if needed...
    view full answer...
  • Adapter Recommendation to Convert Separate Trailer Wiring to Combined
    What you need is a converter to match the combined trailer wiring you have with the separate wiring you have from the vehicle. For that what you need is the part # RM-732 installed on the wiring. This will take the separate wiring and make it combined so that it will work like it should on the 7-way.
    view full answer...
  • Can 4-Way of Boat Trailer Be Replaced with Coiled 7-Way
    The part # WG54006-043 could pretty easily replace a 4-way on a trailer like what you have. It would basically be just cutting off the 4-way and wiring the 7-way in it's place. The install video I attached shows a junction box being used to accomplish this like the # 38656. The video will walk you through the entire process. The circuits not needed from the 4-way to the 7-way can simply just be not used without a problem.
    view full answer...
  • Will WesBarg RV Style 7-Way Trailer Connector Work on Utility Trailers with Brakes
    Yes, the WesBarg RV Style Connector # WG54006-043 will work on your utility trailers. The only difference between a traditional RV style 7-way and a utility trailer 7-way is the wire color. The pins of the connector are the same. Therefore wire the connector on by function not color. Which is always a good idea anyway.
    view full answer...
  • Will Trailer Brakes Still Function if Breakaway Kit isn't Hooked Up
    Your trailer's brakes will still activate like normal if you have your breakaway kit not connected. It's not recommended to tow a trailer with a non-functioning breakaway kit though.
    view full answer...
    Image 1 for
  • Looking For Direct 7 Way Replacement For A 1997 Dodge 3500
    Though I do have a hardwire option available, it does not look like we will have a plug and play 7 Way that will match your current plugs, unfortunately. However, the Hopkins 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring # HM40975-11998 will be a great upgrade and includes all the needed. It will also give you both the 7 Way plug and 4 Flat plug, so no adapter will be needed if you tow multiple trailers. So this isn't a perfect plug and play replacement, but...
    view full answer...
    Image 1 for Image 2 for
  • 7 Wire to 4 Wire Round Adapter Needed
    I have attached a picture for you. If you need connectors like those in the picture then you can use the Hopkins Endurance Flex-Coil Trailer Connector Adapter with Nite-Glow, # HM47043. This adapter is designed for use when flat towing, 7-wire blade-style vehicle end connector and 4-wire round towed vehicle connector. If you have a different style of connector, please send me a picture and I will be happy to find a product that will work for you.
    view full answer...
    Image 1 for Image 2 for


< Previous
12




Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Hayden R
Installed by:
Hayden R
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Thomas T
Video by:
Thomas T
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.