Upgrade your RV kitchen or boat galley with this premium, Italian-made mini fridge and freezer. Sleek built-in design installs into shallow or tight spaces to save space whether your adventure takes you by land or sea.
Features:
Specs:
Note: Position the refrigerator in a convenient location away from extreme heat and cold. You must allow 3" of space on all sides for proper ventilation. The cabinet should also be vented. No exterior vent required.
The distinctive, double-purpose mounting flange lets you surface mount this unit for a partial built-in look or recess mount for a total built-in look. Just slide the flange into your preferred position before installation to ensure your fridge is secure and won't get damaged from turbulent travel conditions.
The convenience and efficiency of this first-class 12V mini fridge sets it apart from the competition. It can operate up to a 30-degree angle. It also features an airlock door system to keep your food and drinks as chilled as possible - it closes tight enough that you can hear it latch, so you know no cold air is escaping. With the integrated vent position system built into the door, you can keep the door slightly ajar when not in use to prevent unwanted odors and mold.
The integrated freezer makes it convenient to store and access your frozen food with its wide opening and magnet to hold the door open for you. Having easy access reduces the time the door remains open which helps maintain the internal temperature to prevent the thawing and refreezing of food. This prevents inefficient temperature retention, which can lead to higher energy consumption, as the appliance works harder to maintain the desired temperature.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a look at this Vitro Figo black RV mini refrigerator. Now this Italian made mini fridge with internal freezer is made with premium materials for structural integrity and operating efficiency, and also provides a really nice refined look. Now this fridge is designed for shallow depth installation in your RV, camper van, or boat, and it is constructed to withstand the riggers of off-road and marine conditions. This is built with a steel outer cabinet for stability and protection and then within blown polyurethane foam that's going to improve its energy efficiency with full coverage and hardens for enhanced structural stiffness.
This is designed to operate at vehicle angles up to 30 degrees. And let me go back to the rear of this fridge here real quick. As you can see this is going to be a hard wire installation that's going to hard wire to your 12 volt, 24 volt DC power. Now for adequate air circulation and heat dissipation, there should be about three inches of clearance from the side of the cabinet to the side of the fridge and the cabinet should also be vented. Now the door hinges can be mounted on either side for left or right opening, whichever is going to be best for you.
And along with being able to switch the hinges you can also switch the door latches as well. So this is going to be very flexible depending on which way you need to open up this mini fridge door. Now speaking of the latch, the latch makes a reassuring click when the door is closed, as you can hear right there. And it's gonna be hard for you to see here, but this does feature a sliding vent design. And so right here, there is a sliding locking tab here that when you have it engaged, this is going to prevent the door from closing all the way.
And that's going to make it easier to allow the proper airflow when you have this in storage during the off season. So you're not gonna have to worry about it being musty or mildewy or moldy in this fridge. When you are ready to travel and you are ready to use this it's going to have the proper air circulation and it's going to be ready to use. So that's really a nice feature that this offers. And then I'm just going to slide that back to where you can close that.
So gonna be very easy to use. And again, a really great feature. Now this has an inside, the inside rather, has a total capacity of 3.2 cubic feet. And the fridge itself has a capacity of 2.8 cubic feet, and the internal freezer here has a capacity of 0.4 cubic feet. Now obviously I don't have this connected to power, but we do have a bright, efficient LED light that's going to make it easier to find your midnight snack in low light or dark conditions. And then this does have a temperature control dial and it is behind our produce drawer. So I just wanted to show you that there in case you we're wondering if you do have a temperature control knob, but indeed you do. Now, inside this fridge as you can see, there are two adjustable wire coated shelves and I just wanted to give you a brief demonstration of how you can adjust these. So as you can see, these are secured in place right now, but if you wanted to adjust one of the shells you would just pop the rear of the shelf up a little bit to unlock it or unsecure it. And then that's going to allow you to slide the shelf out and then adjust it where you want it. And then once you have it in there, I just push it, push the back down, and then that's going to lock that into place. So again, this is a coated, these are coated wire shells, so if you spill anything on there it's gonna be very easy to clean up, very easy to wipe away. Underneath these shelves, as I have already mentioned, we do have a white produce drawer and then right above the drawer is a tempered glass shelf to keep the top of that drawer closed and prevent anything from accidentally falling into that drawer. So again, that's a tempered glass shelf that we have there. Now inside the door we have three shelves for storage and on the mid, the bottom shelf here we have a safety bar and then we also have these sliding tabs there to hold smaller items into place, maybe like a bottle or something like that. So you've got some flexibility there. The only adjustable shelf that we have here is the middle shelf and there's two positions. So I have it on the lower position, but then you can adjust it to a higher position as well in case you need some more height space here for your middle drawer, your bottom drawer rather. So you do have quite a bit of flexibility in regards to how you'd like to lay things out in your mini fridge. Now above we do have our full coverage freezer door which allows for easy access and good temperature management. And the freezer door pivots upward and as you can see, it stays in place. So you're gonna have complete clearance to get the things that you need out of that freezer compartment. You're not gonna have to worry about struggling with the door. We also have an ice cube tray so you can make some ice while you're out on the road. And then a drip tray within which is going to prevent ice build up up in the fridge. Now this also features a one piece sliding flange system that's going to allow for flush or recessed mounting options in your cabinet. I do wanna point out that hardware is not included so that is something that you would have to pick up yourself maybe like at a local hardware store. And again, that hardware is gonna be dependent on your application or the, your particular installation in your camper van, RV, or boat. Now the, in case you we're wondering, this does not require a vehicle exterior vent. So a vehicle exterior vent is not required with this. And then just to wrap up our time together with some overall measurements, I wanna give you the measurements with and without this flange. So beginning with the width first and measuring with the flange, I measured this earlier. We're sitting at about 21 and 9/16 inches wide with the flange and then without the flange we're sitting right at about 19 and 13/16 inches wide. In regards to the height from top to bottom with the flange we are sitting right at about 31 and 5/16 inches tall. And then without the flange from top to bottom we're sitting at about 31 and 1/8 inches tall. And then the depth is going to be the same whether with or without the flange. From the front all the way to the rear portion here where we have this portion sticking out just a little bit we're sitting right at about 18 and 1/16 inches deep. The overall weight is right about 55 pounds, so it's not terribly heavy. I was able to move this fridge around myself with little problems. Well, that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Upgrade your RV kitchen or boat galley with this premium, Italian-made mini fridge and freezer. Sleek built-in design installs into shallow or tight spaces to save space whether your adventure takes you by land or sea.Works great, modified existing cavity and it fits perfectly.
Do you have a question about this RV Refrigerator?
Condition: Badly Dinged
Notes: There are dings and scratches across the fridge. The product was damaged on the corners. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.