bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. Vent
  5. 12V Fan
  6. 14W x 14L Inch
Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - White
Ventline

Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - White

Part Number: V2094SP-30
$103.76
Retail:$159.93
You Save: $56.17
RV Vents and Fans
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank. Great Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - White part number V2094SP-30 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1127)
  • Q & A (0)
  • Photos

Ventline RV Vents and Fans - V2094SP-30

  • Roof Vent
  • Vent
  • 12V Fan
  • 14W x 14L Inch
  • White
  • Manual Lift
  • Ventline
  • Plastic and Metal
  • 4-1/2 Inch

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.


Features:

  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
    • Simple to upgrade from non-powered model
  • Basic, hand-operated crank rotates to open and close dome
  • Switch to turn the fan on/off is mounted on the vent
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Fan uses 12-volt DC power
    • Wiring sold separately
  • Made in the USA


Specs:

  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Fan power: 12-volt DC
    • 100 CFM
  • Cover color: white
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10" Open
  • 2-Year warranty


Notes:

  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.


V2094SP-30 roof vent


Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame and wiring compartment cover to make electrical connections.
  7. Connect to 12-volt DC power source
  8. Replace screen frame and cover.
  9. Attach interior garnish piece with #8 screws.


V2094SP-30 Ventline Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White





Customer Satisfaction Score:


Customer Reviews

Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - White - V2094SP-30

Average Customer Rating:  4.7 out of 5 stars   (1127 Customer Reviews)

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.

by:

My order arrived more quickly than I expected and in good condition. The included single piece of paper (instructions) are absolutely useless. If you haven't done this before, watch a video or two before you start. My vent now works and I'm a happy camper. etrailer came through again!



by:

This fan has worked great for my motor home. If you need a stronger breeze, this may not be the fan for you.



by:

Quick delivery and easy installation. My camper is a little older but this vent fan is an exact match. Bery happy with the removable screen for cleaning great feature the old vent didn’t have.



by:

Ordered ac seal,plumbing boots,bathroom vent and refrigerator vent covers. Descriptions of items were right on.



by:

Perfect replacement. Quick shipping great customer service



by:

I found this vent and fan combination to be just what I needed. I added it to the roof of my enclosed motorcycle trailer. It's made a big difference in keeping the inside of my black trailer cooler. Unless you have sheet metal screws and sealant around the shop, I'd order the install kit. This product does not come with a template for instilling it. I made my own out of thin plywood. Watch the edges of the metal, they are sharp.



by:

This item arrived when they projected it would. As always I'm very happy with the service and how quick they responded when I had a question. I will definately continue to give them my business. I have not yet installed the roof vent so I can't send a picture.

Kerry profile picture

Kerry

4/23/2014

It still works like its brand new. I actually bought another one this year for another location.



by:

Great little fan. It moves some air for being so little. Just wish I would've researched more as it turned out, I do need a bigger fan. Very easy to install however.

Jason D. profile picture

Jason D.

5/30/2018

Still good. Helps a bit with circulation when using a small electric space heater in my pop up camper.



by:

Ordered a Ventline Roof Vent, the total system from the top cap, shroud (extra deep), fan and ceiling fittings. Received promptly, everything as ordered, delivered promptly. Everything fit. ETrailer has become my primary parts source.



by:

I purchase a small 1985 travel trailer and the vent fan stop working. I search online for the best price, well this product review should tell everyone this item wasn't bought at camping world. etrailer.com has the best online prices and great DIY videos. Thanks.



by:

Some reviews said this product was flimsy. I found it to be the same quality or bette than every RV vent that costs more than this one. The nice thing about this one is the screen is easily removable, unlike other RV vents I've used. The opening mechanism works as good or better than others. Overall I'm happy with the quality and operation of this vent.



by:

This item was received in good order. Fantastic and I plan on doing more business with you in the spring.
Thank you so much



by:

I loved that they were shipped the next day and arrived as promised. My installer only used the parts he needed. So, I now have a hybrid of old and new. But they work perfectly together, and I saved the spare parts.



by:

Shipped quickly, arrived in perfect condition. Customer service was outstanding. So nice to be able to talk with a real person and one who is so customer friendly.

Patrick D. profile picture

Patrick D.

7/29/2016

When we need anything for the RV we will definitely buy from you, thanks for excellent service and products.



by:

The product arrived exactly as expected and was easier to install than expected. With the excellent pricing, this is our new RV parts store. Thanks!!



by:

Received vent fan in a timely fashion,product looks excellent.l will be using it in a food truck.



by:

Good quality. 12V fan is small but moves air well. Also is quieter than the original unit it replaced.



by:

Rest assured, most aftermarket parts you buy to repair you rv with, are much better quality than the cr#p the manufacturers build with.



by:

Great vent for the price. Replaced due to hail damage. Seals nicely and lets a good amount of light through. Smooth operation opening and closing.



by:

Great replacement bathroom vent, better customer service.



by:

Screen is difficult to install. and flimsy. About what is expected at that price. Other wise good product. Good service.



by:

same as original that was damaged by hail. still required putting and additional cover over this product to prevent future damage



by:

Been in the camper for a year now and no leaks. Product is excellent . When done looked professional done .



by:

we installed the vent and it seems to be doing a great job.... we have no complaints about the product or the service



by:

Exactly as our old vent. Easy to install. Product shipped immediately. Company sent emails updating delivery. Completely satisfied.


25
1115
Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • MaxxAir Vent Covers In White For Ventline Ventadome Trailer Roof Vent V2094
    The MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066 will fit your Ventline Ventadome Trailer Roof Vent # V2094SP-30. This will allow you to leave your vent open and run the fan even in the rain. You can also leave the vent open when you travel to help keep the trailer cooler and expel any stale air from inside. We also have the MaxxAir II RV and Trailer Roof Vent Cover # MA76JR that provides an easy clip attachment and removal bracket. This will allow you to easily remove...
    view full answer...
  • Replacement For Ventline Trailer Roof Vent V2094
    To replace your Ventline V2094 trailer vent fan, use the following: - Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-30 This includes a garnish which fits roofs 1-7/8" to 3" thick, but if you have a roof with a different thickness use # VA0445-35 for 2-7/8" to 4" thick roofs, or # VA0445-37 for 5-1/8" to 6-1/4" thick roofs. If you need install materials use Roof Vent Installation Kit # 344270KITW.
    view full answer...
  • Vent Cover to Use with a 14-1/4" x 14-1/4" Ventline Ventadome Trailer Roof Vent w/ 12V Fan
    For the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-30, you can use the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066. This cover will fit with the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-30 and allow you to leave your vent open and run the fan even in the rain. You can also leave the vent open when you travel to help keep the trailer cooler and expel any stale air from inside. The cover is also available in black: - MaxxAir Standard RV...
    view full answer...
  • Can the Powered Lift Ventline Ventadome Roof Vent w/ 12V V2119-601-00 Fan Be Opened Manually?
    No, the lifting mechanism on the powered item # V2119-601-00 is different then the manual item # V2094SP-30. You can't just add the knob and twist it open in the event of a power failure.
    view full answer...
  • Availability of Replacement Parts for Ventline Rounded Dome Trailer Roof Vent
    The Ventline product you reviewed, part # V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank assembly, a removable screen, and a white plastic 2-1/8-inch-deep garnish (interior trim ring). Please note that this part requires an installation kit, part # 344270KITW, which consists of mounting hardware and a urethane caulk sealer. If your...
    view full answer...
    Image 1 for
  • Can A Fan Be Added To A Ventline Ventadome Trail Roof Vent Without A Fan
    If you're talking about adding a fan to the Ventline Ventadome Trailer Roof Vent # V2110SP-24 then no, you wouldn't be able to add a fan and would need to purchase a vent that already includes a fan like the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-30. You can splice into the 12v power that's already there to power this vent and make the installation easier. To complete the installation you'll also need some butyl tape # AL28FJ and self-leveling sealant # 34427034145-1...
    view full answer...
  • What are the Measurements for Replacement Screen Frame with Screen # BVC0573-31
    The Replacement Screen Frame with Screen, # BVC0573-31, is designed to fit Ventadome RV roof vents like models # V2092SP-28, # V2110SP-24, # V2094SP-30, or # V2119-601-00. I went out to the warehouse to take some measurements so you could compare it and the design of the vents listed above with your existing vent to determine if this is the correct replacement part for you. The frame and screen is 13-1/2 inches by 13-1/2 inches. It is about 1-5/6 inches tall when placed upside down on...
    view full answer...
  • Is the Fan in the Ventline Ventadome Trailer Roof Vent Reversible
    The fan itself only fits onto the motor one way. If you wanted to reverse the rotation of the fan you would need to switch the positive and negative leads on the back of the motor. I tried this with just the motor and it will reverse the rotation. However, since the fan can only be put on one way and the blades are at a fixed angle, reverse the motor direction will also reverse the air flow direction.
    view full answer...
  • Does the Fan of the Ventline Ventadome Trailer Roof Vent Pull Air Out of a Trailer
    The Ventline Ventadome Trailer Roof Vent # V2094SP-30 that you referenced is an exhaust fan, what that means is that it pulls air out of the the trailer. The reason for this is that hot air rises, so when you pull out the air at the top of the trailer you will be removing the warmest air and replacing it with cooler air. I am not sure if this would be sufficient to keep your candy from melting while they are being transported through a hot desert climate. You might have to pack them in...
    view full answer...
  • Option to Replace Fan-Tastic Roof Vent 6500/410 With Remote
    We have spoken to Fan-Tastic Vent about this issue in the past, and they have confirmed that there are no replacement remotes available for the 6500 model as it's no longer in production. So if you want to still use your existing fan but also wanted a remote, they said what you can use is the Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359. However, this is similar to getting a brand-new vent, so you can go that route, with a number of different options. For a powered lift with a remote...
    view full answer...
  • Replacement Screen for Ventline Vent V2094
    The Phillips V2094 you referred to is the same as the Ventline Ventadome # V2094SP-30 and we do carry screens for this vent, in two colors. The part number for Birch White is # BVC0573-31 The part number for Polar White is # BVC0573-41 These include the screen frame and screen; I've added links to video reviews of both parts for you to take a look at.
    view full answer...
  • Which Trailer Vent Covers Let More Light Pass Through, White or Smoke
    The smoke and white covers that are on the Ventline roof vents are both going to let quite a bit of light into the trailer. However, due to the translucent nature of the smoke covers they would let more light in. Both would last about the same amount of time. One has not been shown to stand up to the sun better than the other. For a smoke version of the part # V2094SP-30 that you referenced you would want the part # V2092SP-29.
    view full answer...
  • Replacement Parts for Ventline V2094 Powered Vent
    I am sorry to hear about that. We do offer a couple of replacement parts for the V2094 powered vent. The Replacement Operator, Knob and Screw item # BVD0462-00 and the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents item # BVD0215-00. If neither of these parts are what you are looking for we offer entire replacement assemblies for the V2094. The vent assembly item # V2094SP-34 in smoke and item # V2094SP-30 in white.
    view full answer...
  • Replacement Screen for Ventline Northern Breeze Vent
    I do have an option for you but the Replacement Bug Screen part # FVK2034-80 is not correct for your Ventline Northern Breeze Vent nor is the correct replacement available as it has been discontinued by the manufacturer. The only option we can offer you is a new unit, the Ventline Ventadome Trailer Roof Vent part # V2092SP-28 or part # V2094SP-30 with fan. These units will however be a direct replacement for the Northern Breeze Vent you have now. The screen is also replaceable using the...
    view full answer...
  • Replacement Ventline Trailer Roof Vent Covers for Parts V2092 and V2094
    We carry a broad range of Ventline products, complete vent assemblies as well as individual replacement parts, for both of the part numbers you referenced. For Ventline item V2092 we offer complete vent assemblies, # V2092SP-29 in smoke color and # V2092SP-28 in white. Replacement domes are also available, # BVD0449-A03 in smoke and # BVD0449-A01 in white. For powered vent V2094 we offer a complete vent assembly # V2094SP-34 in smoke and # V2094SP-30 in white. Replacement domes only...
    view full answer...
  • Replacement Roof Vent Recommendation for Northern Breeze on a 2006 Jayco Jay Flight Travel Trailer
    To replace the Northern Breeze V2425 vent on your 2006 Jayco I recommend the Ventline Ventadome # V2094SP-30 which is a standard manual 12V vent with a white lid - this should be pretty identical to what you currently have. Be sure to pick up the Installation Kit # 344270KITW so you get all of the hardware and sealer needed to complete the installation.
    view full answer...
  • Installation Instructions for Ventline Ventadome Trailer Roof Vent with 12V Fan # V2094SP-30
    The part number that was provided is actually for the screen, # BVD0434-31, which is included with some Ventline roof vents. To obtain the part number for the fan you will need to remove the screen. I have attached a set of installation instructions which cover the Ventline Ventadome Trailer Roof Vent w/ 12V Fan, # V2094SP-30, as well as a few other models. If your model is not listed on the instruction sheet, please feel free to send me an email with your model number and I will get the...
    view full answer...
    Image 1 for
  • How is Motor Mounted to Ventline Ventadome Trailer Vent V2094
    You are correct, the Replacement 12V DC Motor # BVD0218-00 is mounted via screws which are underneath the fan blade (see accompanying photo), which is Replacement Fan Blade # BVD0215-00 for the Ventline Ventadome Trailer Roof Vent # V2094SP-30 (you will need this fan as well if you are replacing the motor on a fan which was manufactured before 2002. In regards to the spade connectors, you are right on the money as that is what is used with the switch. You can see that in the linked video...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Roof Vent Lid for Hallmark Trailer
    For some reason I'm not able to open your picture but if it looks just like the one in the answer you mentioned then you have a standard sized roof vent with a continuous hinge. The hinge is a metal hook sort of shaped like "J" that runs the majority of the length along one side. I've attached the picture from the answer page you mentioned. The correct replacement lid is # BV0554-01 in white or # BV0554-03 in smoke. For a full replacement vent you can use # V2092SP-28. Or if you want...
    view full answer...
    Image 1 for
  • Replacement Vent Cover for Ventline Roof Vent
    We have several selection for replacement vent cover for Ventline Old-Style Rounded Dome in smoke, # BV0554-03. Or in white # BV0554-01. In wedge shape, white, # BVD0449-A01. In wedge shape, smoke, # BVE0108-03. Rounded dome, white, # BBC0530-01. Rounded dome, blue/grey, # BBC-0530-04. Please note the links to product review videos and installations.
    view full answer...
  • Forest River LED Trailer Light Replacements
    For an LED version of the light you sent in a picture of you'd want the part # STL22RB with the grommet part # A70GB. I also attached an install video for this for you to check out as well. Since I am not totally sure what the other marker lights are we do have the LED part # MCL31RB which is 4 inch by 2 inch. For a standard roof vent to fit what you have currently we have the Ventline Ventadome kit part # V2094SP-30 which has a 12 volt fan in it. For interior lighting we have the...
    view full answer...
    Image 1 for
  • Recommended Replacement Roof Vent for a 2022 Forest River Heritage Glen
    Hey Debbie, I wasn't able to find anything with that model number but if you're just replacing the entire fan anyways it doesn't really matter. As long as your current fan uses a 14" x 14" cutout, then you could use the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07000K to replace it. This kit includes a brand new 10 speed fan with an automatic lift, an integrated rain shield to protect it when the weather turns suboptimal, and includes a thermostat and remote.
    view full answer...
  • Can Ventline Ventadome Trailer Roof Vent V2094 be Converted to the Wall Mount Switch Version V2119
    Since the big difference between the Ventline Ventadome Trailer Roof Vent # V2094SP-30 and the vent # V2119-1-533 is that one has the control right on the unit and the other has a wall mount I see no reason why you can't just unhook the wiring from your current trim and then either route it to the Switch # VC0533-03-A. You can even swap out your current frame/screen with part # BVC0573-31 for Birch White or part # BVC0573-41 for Polar White. I have attached a video showing how to replace...
    view full answer...
  • Do I Need a Fused Connection To Install the Ventline Ventadome 12 Volt Roof Vent Fan
    The Installation Instructions for the Ventline Ventadome Trailer Roof Vent # V2094SP-30, do not mention using a inline fuse. They show the connection going straight to the 12V battery source. I have seen these installed and wired into the nearest light source. The only draw back is the fan will only receive power when the light switch is on this way.
    view full answer...


< Previous
12



Do you have a question about this RV Vents and Fan?


Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Adele M
Updated by:
Adele M
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.