Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - Birch Trim

See what our Experts say about this Ventline RV Vents and Fans

• Replacement Cover Options For A Ventline V2094 RV Roof Vent
  Hey Tim, To replace the cover of your Ventline V2094 RV roof vent you can use either part # BVD0449-A03 (smoke) or # BVD0449-A01 (white). I've attached a short video below where Shane will walk you through the installation process.
  view full answer...
• Recommended Roof Vent for a 2019 Keystone Cougar 5th Wheel Trailer
  The Ventline Ventadome Trailer Roof Vent item # V2092SP-25 you were looking at would definitely work based on your measurements. You may need to widen the hole slightly but it wouldn't be by much. This is our smallest size.
  view full answer...
• Replacement Smoke Colored Rounded Roof Vent Cover for Ventline Roof Vent On a 2022 Forest River TT
  It sounds like you're looking for the Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19. This replacement cover is rounded, has an overall L x W of 14-13/16" x 14-13/16", and is made from smoke-colored polyethylene. If you're looking for something else, feel free to come back with pictures or more information and we'd be happy to help.
  view full answer...
• Confirming Fit of Ventline Replacement Trailer Roof Vent # V2092SP-25 on 2005 Gore Trailer
  Thank you for providing the photos of your trailer roof vent that requires replacement. Based on your photos and ruler measurement it appears that your 2005 Gore trailer uses a standard size roof vent intended for a 14-1/4 x 14-1/4-inch rough opening. I have linked you to our main page for trailer roof vent assemblies just in case you wish to consider other designs which include options in metal as well as plastic. The Ventline kit you referenced, part # V2092SP-25, should work fine for...
  view full answer...
  
• Vent Cover Interior Trim Pieces For A Ventline Ventadome
  Yes, we have a few sizes for your Ventline Ventadome Trailer Roof Vent # V2092SP-25 depending on your needs: Ceiling Garnish for Ventline Roof Vent - 2-1/8" Leg # VA0445-26. Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg # VA0445-27. Ceiling Garnish for Ventline Roof Vent - 4-1/8" Leg # VA0445-36. Ceiling Garnish for Ventline Roof Vent - 4-1/4" Leg # VA0445-28. Ceiling Garnish for Ventline Roof Vent - 5-1/8" Leg # VA0445-29. Ceiling Garnish for Ventline Roof Vent - 5-5/16" Leg...
  view full answer...
• Can A Fan Be Added To A Ventline Manual Roof Vent?
  The Ventline Ventadome Trailer Roof Vent # V2092SP-25 that you're referring to doesn't actually have a fan, it is just a roof vent. You could technically add a fan to your roof vent, with a fan blade # BVD0215-00, and a motor # BVD0218-00, however the wiring harness and mounting brackets aren't offered so that is something you'd need to supply. Instead, a much easier solution is to swap roof vents alltogether with the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-28. This...
  view full answer...
• Replacement Screen Assembly for Ventline Ventadome Manual Lift Roof Vents in Birch White
  Yes, you can purchase just the screen assembly with birch trim that comes with the Ventline Ventadome Trailer Roof Vent # V2092SP-25. Just the screen assembly is the Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents # BVC0573-31. If you are needing just the screen itself in Birch, that is the Replacement Screen for Ventline Ventadome Trailer Roof Vents # BVD0434-31.
  view full answer...
• Replacement Trailer Vent Recommendation for a 14-3/4 by 14-3/4 inch Opening
  Your pictures made it through, and yes, the Ventline Ventadome Trailer Roof Vent # V2092SP-25 would work great as a replacement roof vent for what you had in your trailer. You may also be interested in the install kit part # 344270KITW.
  view full answer...
  
• Replacement Vent Cover for Ventline V2094
  We have two options of replacement vent covers for the V2094 model, the white dome assembly, # BVD0449-A01, and the # BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please look at the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents, # BV0554-01 for white or # BV0554-03 for smoke. For replacement lift parts, we have the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof...
  view full answer...
• How to Determine if Ventline Trailer Vent Will Fit 2017 Wolf Pup 17RP
  It is likely the Ventline Ventadome Trailer Roof Vent # V2092SP-25 will fit your 2017 Wolf Pup 17RP but you do need to take some measurements to find out because vents are universal parts and are not designed to fit any specific trailer. That said, this vent fits what is a standard 14-1/4" wide x 14-1/4" long opening in trailer roofs so if you measure your opening and get that, then this vent will fit so long as your roof is between 1-7/8" and 3" thick. You can still install this vent...
  view full answer...
• Kit to Install Ventline Roof Vent on Fiberglass Roof of 2007 Gore Horse Trailer
  We have a roof vent install kit that will work great with the Ventline roof vent part # V2092SP-25 and a fiberglass roof with the part # 344270KITW which comes with install hardware, sealant, and butyl tape.
  view full answer...
• Recommended Ventline Ventadome Roof Vent to Allow Most Light to Shine Through into RV
  Both the Ventline Ventadome Roof Vents you mentioned in your question, the White # V2092SP-25 and the Smoke # V2119-603-00 have translucent covers, which will allow for some light to shine through into your RV. The smoke color Roof Vent will act more as a heavily tinted window, so probably won't be quite as bright as the White Roof Vent when the sun is shinning. I recommend going with the White # V2092SP-25 if you are wanting the brightest possible solution, although keep in mind that...
  view full answer...
• Replacement Roof Vent for 1994 Thor Citation Trailer
  Is it just a roof vent cover you are looking for? If so, I have linked the page to your options which will be based on the hinge style present on your assembly. I've attached a photo of the 4 style options to assist. If you are looking to replace the current vent completely, then I recommend the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - Birch Trim # V2092SP-25. For this installation, I recommend the Installation Kit # 344270KITW and I've attached...
  view full answer...
  
• Replacement Roof Vent Cover for Sundowner Horse Trailer
  The replacement vent cover for your Sundowner horse trailer can be different as vents are often changed over the years by manufacturers. The vent cutouts remain consistent because there is an industry standard size so replacements are available but the hinge design may be different. I've attached the link to all your cover options to assist as normally a quick glance will help you determine the style. I've attached a photo to assist. If you want to send a photo of the vent cover,...
  view full answer...
  
• Ventline Replacement Cover Recommendations
  If you have the Ventline Ventadome Trailer Roof Vent # V2092SP-25 that you referenced the correct replacement cover would be the Replacement Dome Assembly # BVD0449-A01. If you have a different Ventline Roof Vent check out the link I attached that shows all of the replacement covers we currently carry.
  view full answer...
• Could Vent Cover for RV Roof Vent be Used to Help Prevent Roof Leak on Travel Trailer
  Yes you can install a vent cover on a roof vent on your Puma travel trailer if you wanted to direct water away from the vent so that it will stop leaking. The MaxxAir vent cover part # MA00-933066 is designed to fit over standard roof vents like what you'd have and would be a great solution. I attached a review video for this for you to check out as well.
  view full answer...
• Removing Vent Screen To Replace or Repair Vent Parts in Ventline Ventadome Trailer Roof Vent
  The Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - Birch Trim # V2092SP-25 can be fixed easily. You will start by removing the trim/garnish from the inside of your trailer. Then you will remove the screw from the black handle on the manual lift to remove the knob and also any other screws holding the screen in place. Then you will be able to remove the screen and replace the screw that fell out of your crank assembly. I've attached a couple videos to assist.
  view full answer...
• What Is The Difference On The Birch White Ventline Trailer Roof Vent?
  The Birch on the Ventline Ventadome Trailer Roof Vent # V2092SP-25 is simply an off white color on the inner trim. We also have the White # V2092SP-28 version if you want the bright white on the inside trim of your 2014 Crossroads Z1. I have no way to lookup exactly what would have come on your trailer but they will both fit so you can choose the color you prefer. You will need the Install Kit # 344270KITW for each vent you replace.
  view full answer...
• Replacement Roof Vent Lid to Fit Multiple Tab Hinge for Older Horse Trailer
  Thanks for the photos, Charlotte! The replacement lid you're looking for is the Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147. This is designed for standard 14" x 14" vent covers which you actually have. The 14" measurement is taken from the opening up above which is why your measurements are slightly different. If you wanted to upgrade to a newer vent that is completely possible and you won't have to modify the hole in your roof. For a standard replacement...
  view full answer...
• Will The Fan-Tastic Vent Ultra-Breeze Cover Fit A Ventline RV Roof Vent
  The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR would be a compatible fit for the Ventline Ventadome Trailer Roof Vent # V2092SP-25 and would use the same mounting screws as the vent to mount it to your trailer's roof. I've attached a video below where Rob will walk you through the installation of this vent cover. We do have another option that comes with a rain shield so you can use the vent in any weather and also while driving with the MaxxAir Mini Manual RV Roof...
  view full answer...
• Replacement Roof Vent/Lid that Could Fit 2017 Winnebago Sunstar 27PE
  If you wanted to just replace the vent lid I'd need to see a picture of the old damaged lid and/or the hinge of the assembly to see if we have anything for it. Otherwise a standard RV roof vent could fit what you have but at worst you may have to slightly open up the hole. Standard roof vents like the Ventline Ventadome part # V2092SP-25 require a 14 inch by 14 inch rough cut square hole so you may just have to open up the hole a bit.
  view full answer...
• Need Replacement Vent Cover For Bathroom Exhaust Fan In 2003 Fleetwood Discovery
  Hello Lisa, I can certainly point you in the right direction, but I will need to know exactly what model of vent you have on your 2003 Fleetwood Discovery. There is no way to look up your RV to know what kind of vent you have, and the covers are, for the most part, brand and model specific to the vents. For example the Replacement Dome Assembly # BVD0449-A01 will work with the Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128. If this is not what you have, let me know...
  view full answer...
• Replacement Roof Vent for a 2010 Gulf Stream Conquest Ultra-Lite 24BH
  The standard roof vent size opening is 14-1/4" wide x 14-1/4" long. This is the case for around 95% of trailers on the market today but you may want to take a quick measurement just to be sure. I have attached a list of our roof vents that will fit a 14-1/4" wide x 14-1/4" long opening for you. If you are just looking for a standard vent then I recommend the Ventline Ventadome Trailer Roof Vent part # V2092SP-25. This vent has a hand-operated crank handle for easy use, removable screen...
  view full answer...
• Installation Kit Needed For Installing The Ventline Ventadome Trailer Roof Vent
  To install your Ventline Ventadome Trailer Roof Vent # V2092SP-25 you'll definitely want the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws # 344270KITW to go along with it. Having installed a vent before my one tip is to not be afraid to load up the sides with the self-leveling sealant. If you start at the base/on top of the RV and keep laying over top around the vent it will all settle down for a great water tight seal.
  view full answer...

Do you have a question about this RV Vents and Fan?