Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
(306 reviews)
Price: $67.38
In Stock
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Item # V2092SP-29
Retail:$97.52
Our Price: $67.38
You Save: 31%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (306)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2092SP-29
- Roof Vent
- Vent
- No Fan
- 14W x 14L Inch
- Tinted
- Manual Lift
- Ventline
- 4-1/2 Inch
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with a hand-operated crank.
Features:
- Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
- Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
- Translucent cover allows some light through
- Aerodynamic, wedge-shaped dome made of durable polypropylene
- Galvanized steel roof flange won't rust or corrode
- Snap-out screen is easy to clean
- Polar White interior trim piece (or garnish) is included
- Made in the USA
Specs:
- Included garnish fits roofs 1-7/8" to 3" thick
- Garnish leg length (depth): 2-1/8"
- Garnish color: Polar White
- Other garnish sizes are available (sold separately)
- Cover color: Smoke
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Measurement of metal lip of vent: 16-1/2" x16-1/2"
- Garnish measurements: 16" x 16"
- Vent extends above roof:
- 4-1/2" Closed
- 10-3/4" Open
- 2-Year limited warranty
Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
Installation Instructions
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Attach interior garnish piece with #8 screws.
V2092SP-29 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke - V2092SP-29
Average Customer Rating: 4.7 out of 5 stars (306 Customer Reviews)
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with a hand-operated crank.by: Doug12/27/2021
Very pleased with product and the fast cheap delivery.Also liked that the size stayed the same all these years it fit the opening of my old vent in my 1978 classic van
by: Gregory 07/08/2023
This was an easy drop-in replacement for a broken OEM vent. Well-made, although its usable life in a high-altitude, high-UV western-Colorado environment is yet to be proven. But if anything this vent was better-made than the OEM item. I have no reservations about recommending it to other DIY RV owners.
by: H Mackay09/05/2014
Installed this vent into my Haulmark Transport 6'x12' enclosed trailer. Installation was easy, I cut a 14.25" x 14.25" inch hole between two crossmembers in the roof and dropped it in place. Because the roof on this enclosed trailer is so thin, I used a piece of 3/8" plywood so sandwich between the interior garnish and actual vent. I cut the same size hole into the plywood and left a 2" lip all around. I use 28 #8 x 5/8" stainless screws to hold it in place, pre-drilled with 1/8" bit. I then used roofing tar to seal the vent and put masking tape all around, leave 1" from the flange to ensure good coverage. I then removed the masking tape, leaving nice clean lines. Interior garnish is held in place by #8 x 3/8" galvanized screws.
Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!
by: Jerry Kramer08/16/2017
My truck build; I have developed, invented, a new kind of truck cap and also wanted to provide the best venting in the industry and this is why I wanted this product. Although it is a little flimsy it is easy to install and easy to use. And it adapts well for my use. My product (I hope to have available in good stores like Etrailer by years end) is a rigid, folding, adjustable (fits most trucks), one person on & off, and easy to store when off pick up truck cap or camper. See attached photos of my prototype build. Many have inquired to use it for their pets, for camping, and many other uses.
by: BrianB.09/09/2019
Learned my lesson, not to go cheap! I bought a $20 dollar vent online less a year ago, and the Arizona heat disintegrated it. I called Noah at eTrailer and he was fast, knowledgeable, and courteous. The new vent arrived within a few days and it installed in less than and hour without a problem. Most of the work is in the prep. If you've never done this before, follow the instructions in eTrailer's video, and you won't have any problems. If you need to trim the garnish ring, I snipped it vertically at either side of the corners and then bent the plastic, snapping it like tile or drywall. Easy-Peasy! I really like the smoke tint to, I can see the sky through it. Thanks for the suggestion Noah!
by: Yvette09/26/2023
fit like a glove
by: David09/18/2022
I used this vent to replace an older static vent in our high top camper van. The installation and instructions were OK, and the vent opening mechanism works fine. The issue is that the top cover is too flexible, and it always flapped in the wind. I purchased a replacement cover from [online company], which is thicker, stronger with more reinforcing ribs. It works fine. Overall a good product with a flimsy top cover.
by: Tom 02/22/2023
This vent was exactly what I needed. The original had been broken and the replacement from etrailer was a perfect fit and the quality was better.
Thank you etrailer
by: Wade 08/31/2023
Great service once again, thanks!
by: Gary04/05/2013
Was a replacement for another ventline taken out by hail. Item was as presented, price was right shipping was prompt. Will use terai let again if need arises
by: Melvin07/24/2022
Looks terrific, as described. Only wish the done were a little less flimsy. The product fit & looks perfect however the plastic dome could have been a little thicker plastic
by: Christopher 06/27/2023
Simple and low cost, does the trick!
by: Milton 08/24/2023
Quality product from a quality company.
by: Richard 08/22/2023
Good product..
by: Paul07/28/2016
This product is a wonderful addition to our travel trailer.
Since we installed the one vent and another vent with the fan we have
not had any problems with them. Great products !!!
I would like to mention that the colored covers let in more light then
the old white cover.
Paul
7/28/2017
Great. Still looks and works like it should.
by: Jim 04/05/2023
If customers service is your mission statement I feel very much appreciated. You have earned my loyalty 100%. Your company is on speed dial . I received my product today only 2 days after ordering and I appreciate the upgrade shipping at no costs to me and the product was perfect. Thanks
by: Keith 11/21/2022
product looks great not on the trailer yet. every thing came on time, and etrailer made sure it did by upgrading the freight.
by: Coleen S.07/09/2016
This vent was shipped fast and received within a week after. I was contacted by a customer rep to make sure I was satisfied or had any questions. Vent went in quickly and easily. Instructions were clear and I had no trouble understanding what was required. This was the first time I had done anything like this on my travel trailer and am extremely happy with the results. I would order from etrailer.com again in a heartbeat. Great product-Great customer service. Thank you, George J.
Coleen S.
7/9/2017
After 1 year I am still extremely satisfied with the vent. It is functioning as it should and I have had no problems with it at all.
by: Gaylord10/21/2022
I only ordered (or thought I ordered) the dome cover, not the entire vent assembly.
by: Jake H05/01/2016
I replaced the old vent on a 1983 tent trailer. This vent is twice the size of the original one so there was some cutting and modification of my roof involved but the vent works great. I also got the loctite vent install kit that comes with the sealant and screws to install the new vent. It was a great help for a he install. My roof hasn't leaked since last year.
by: Andrew02/18/2023
Good quality. We’ll made product and works as intended.
by: Steven H.02/15/2013
UPS has a new habit of delivering to my Post Office. So when I get there, 25 miles round trip once a week I was surprised to find your package there. So the question, why pay for UPS shipping if they are not going to deliver and it cost me additional money just to drive to the Post Office?
The product (vent) is nice, shipping could throw a piece of foam on the bottom of the box so the plastic dome does not get all marred up in the box..
Steven H.
8/16/2014
still working and traveling the country
by: Larry j04/07/2015
Pretty solid to be so light weight, UPS beat the hell out of it in route. If it only came with a gasket like the original I removed :-( Fit and function Good, the original lasted 19 years and the plastic dome was still in tact with no leaks, the mechanism broke. 2 Tubes of Hi quality Permatex engine sealer and I hope for the best. I would be happy for 15 years of longevity. The old sealer was petrified from the UV and heat, came off like concrete. That gasket kept it sealed....
Patrick B.
4/15/2015
RTV Silicone makes for an excellent gasket material if you are mounting flat surfaces. Follow the perimeter all the way around, encircle the hardware holes, and attach the vent. Once it cures, it creates a gasket between the two surfaces. For extra waterproofing, you can come back with silicone caulk and cover the heads of the screws and run a perimter bead around the vent.
by: MAUREEN06/05/2017
Products, VENTLINE roof vent for my FORD Econoline and WEATHER TECH window Deflectors, arrived in good condition. I needed to get some air to the back of the van, as it will be used for camping, think this will do the trick. Then I have been interested in trying out deflectors for a long time as well, wanted to be able to get better air circulation without the road noise. All contact was very positive and I would order from you again as well as tell others.
Installation will occure on June12, so will let you know how that goes. It was all a very good experience.
MAUREEN
25
306
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- What Color is the Lid Of Ventline Ventadome Trailer Roof Vent V2092SP-29The lid for the Ventline Ventadome Trailer Roof Vent - Manual part # V2092SP-29 is a translucent "smoke" color. Our photos are taken in a studio with bright lights and it looks like the light was shining through the lid which made it look blue but it is black. I have attached a video for you to get a better look.
view full answer... - Replacement Roof Vent Solution for 2012 Elite RV CamperSince we aren't going to have any replacement covers or vents for a 13 inch by 13 inch roof vent hole the best option we can provide would be to open up the hole to 14-1/4 by 14-1/4 inch and install the # V2092SP-29 in it's place.
view full answer... - Replacement Ceiling Vent for 1998 Charmac Snowmobile TrailerThe Ventline Ventadome Trailer Roof Vent # V2092SP-29 that you referenced does not include a fan. The vent itself measures 14-1/4 inches by 14-1/4 inches which is standard for trailer roof vents. The garnish around the vent is the 16 inches by 16 inches and the metal lip is 16-1/2 inches by 16-1/2 inches. If these measurents match the style of vent you have then this will work for you.
view full answer... - Roof Vent Recommendation for a 1981 Jayco Tent TrailerNothing we have would fit the hole size in your trailer, but if you would be willing to enlarge the hole to 14-1/4 inch by 14-1/4 inch you could use the part # V2092SP-29. I attached a review video for this roof vent for you to check out as well.
view full answer... - Ventline Ventadome Trailer Roof Vent Recommendation for a 6x12 Enclosed Trailer for Gas FumesYes, the Ventline Ventadome Trailer Roof Vent # V2092SP-29 would fit the roof of your 6 x 12 enclosed trailer and would do a great job to get rid of the gas fumes that are building up in there from your equipment. I attached a review video for this product for you to check out also.
view full answer... - Trimming Roof Vent Garnish V2092SP-29If the inner lip of the garnish is too long, I would recommend marking it where it needs to be trimmed and using something like a rotary cutoff tool. Make sure you have the garnish secured so that it does not move around when trimming. The edges will be sharp after trimming the garnish so I would suggest using sandpaper to smooth the edges that have been trimmed.
view full answer... - Exit Vent Replacement Ventline Model V2047From my research it looks like you have a 24" x 24" Ventline exit vent. We do not carry exit vents only roof vents which are much smaller compared to your existing opening from my research. If you needed a roof vent, you could use the standard Ventline Ventadome Trailer Roof Vent # V2092SP-29 but you would most likely need to cut a new opening size of 14-1/4" wide x 14-1/4" long to install it.
view full answer... - Will Ventline Ventadome Roof Vent Fit 14 inch by 14 inch Square Opening on TrailerThe Ventline Ventadome Trailer Roof Vent # V2092SP-29 will fit your trailer that has a 14 inch roof opening. Worst case scenario you'd have to open up the opening on your roof a little bit but even that most likely wouldn't be necessary. This vent is designed for that standard roof opening size that's between 14 and 14-1/4 inch square.
view full answer... - Replacement Vent for Enclosed Travel TrailerWhat you described does not sound like a vent system that we carry since none of our vents have tabs that protrude up on the corners. The best solution I could provide for you would be to replace your vent with one that we carry as long as the hole for the vent of your trailer isn't better than 14-1/4 inch by 14-1/4 inch. The # V2092SP-29 would work great
view full answer... - Replacement Bathroom Vent Lid for 2010 Keystone SprinterSeveral things will determine the correct replacement vent dome lid. The manufacturer of the vent The size of the vent The location of the lift mechanism (on the side of the vent or in the center) The configuration of the hinge, continuous, three tab, etc. Closely examine the vent and the lid, looking for the manufacturer's name or a model number. If you click the link showing our replacement lids, you can use the filters on the side of the page to narrow down the results according to...
view full answer... - Vent Cover For Forest River Vengeance TrailerThere are many different replacement cover styles for vents, so you will need to determine what specific hinge style you have. I've attached a photo to assist and have linked the page to your many options. I'm not sure what you mean by frame. If you need the entire assembly, we have many options to choose from like the manual lift Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29. We also have powered fan manual lift, power fan powered lift and...
view full answer...
- Roof Vent Replacement Recommendation for a Cargo TrailerThe # V2092SP-29 that you referenced has overall dimensions of 16-1/2 inches by 16-1/2 inches. This includes the metal lip around the outside of the vent. This vent is designed to fit a rough cut hole of 14-1/4 inches by 14-1/4 inches. This is a pretty standard size for a roof vent and is most likely what you have so it should work. But you will want to confirm by checking the dimensions of the roof of your cargo trailer. I attached a review video for this product for you to check out as well.
view full answer... - Replacement RV Roof Vent Solution with Lower ProfileOnly solution we have would be to replace the roof vent with the part # V2110SP-24 which has the lower vent lid like what you are looking for as there isn't a lower profile lid that fits the # V2092SP-29 you mentioned.
view full answer... - Will Ventline RV Roof Vents fit Rough Cut Opening of 14-1/8 by 14-1/4 inchYes both of the vents you mentioned # V2092SP-29 and # V2094SP-34 can fit the rough openings of your RV that is 14-1/8 by 14-1/4 inch.
view full answer... - Locating Replacement 16 Inch x 16 Inch Vents for 2005 Damon Daybreak We do have a large selection of RV vent assemblies available, most of which feature the standard 14 inch x 14 inch measurement, which refers to the rough opening size. If the 16 inch measurement you mentioned in your question is by chance being measured from the outside of the garnish, these options may work well as replacements. For example, the Ventline Ventadome Trailer Roof Vent (without fan) # V2092SP-29 fits a rough opening size of 14-1/4 inches wide x 14-1/4 inches long, however...
view full answer... - Which Trailer Vent Covers Let More Light Pass Through, White or SmokeThe smoke and white covers that are on the Ventline roof vents are both going to let quite a bit of light into the trailer. However, due to the translucent nature of the smoke covers they would let more light in. Both would last about the same amount of time. One has not been shown to stand up to the sun better than the other. For a smoke version of the part # V2094SP-30 that you referenced you would want the part # V2092SP-29.
view full answer... - Solution for 13-1/2" Metal Roof Vent for Enclosed TrailerI do have a solution, but we do not have any vents that will fit your dimensions. I recommend enlarging the hole slightly and installing the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal # V2110SP-24. We also have an option with a smoke lid # V2092SP-29 and white lid # V2092SP-28 available as well.
view full answer... - Recommended Manual 14"x14" Roof Vent For 2008 Hallmark TrailerBased on the dimensions you provided for a roof vent on your 2008 Hallmark Trailer I recommend the Ventline Ventadome Trailer Roof Vent # V2092SP-28 which is a manual lift roof vent with a white lid for a 14"x14" opening. If you would prefer a smoke lid instead you can use # V2092SP-29. To complete the install I recommend the Roof Vent Installation Kit # 344270KITW.
view full answer... - Availability of RV Roof Vent Replacement with Part Number VDO434That part number matches a Ventline Ventadome roof vent like the part # V2092SP-28 which has a white lid or part # V2092SP-29 which has a smoked lid.
view full answer... - Recommended Roof Vent Upgrade To Replace Broken 12x12 Vent LidI have a replacement option but you are correct that we do not carry any 12x12 vent lids. The 12x12 vent lid is an odd size that is difficult to find replacement lids for so I recommend changing your vent to the more common 14x14 vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 that has easy to find replacement parts to make life easier in the future. The Ventline Ventadome # V2092SP-28 has a white lid, but if you prefer a smoke lid you can use # V2092SP-29 Installing...
view full answer... - Would the Ventline Ventadome Trailer Roof Vent part # V2092SP-29 fit a 2005 Keystone SprinterMost likely yes, but you will need to measure the hole in the roof of your 2005 Keystone Sprinter to determine if the Ventline Ventadome Trailer Roof Vent part # V2092SP-29 that you referenced would fit. If the hole in your roof is roughly 14 inches by 14 inches you could easily install this vent. For an install kit you would want the part # 344270KITW.
view full answer... - How to Install a Trailer Roof Vent on a 5 x 8 Pace Enclosed Cargo Trailer with Sheet Aluminum RoofThe Ventadome Trailer Roof Vent, V2092SP-29, is adjustable for roof thicknesses from 1-7/8 inches to 3 inches. If your roof is thinner than this you would need to add a trim ring like a piece of 1/2 inch or 3/4 inch plywood, with a 14 x14 inch hole cut in it, to the inside of the trailer roof. This will also give you a better mounting situation for the vent. You might want to use an Installation Kit, item # 344270KITW, to complete the installation of this vent. I linked a video that you...
view full answer... - Should Butyl Tape or Putty Be Used to Install New Trailer Roof Vent When installing a new roof vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-29 I recommend using butyl tape like what is included in the Installation Kit # 344270KITW. Butyl won't dry out over time like traditional putty and it will help to create a better seal between the vent and roof. I have attached an installation video that you can also take a look at.
view full answer... - Will Ventline Ventadome Trailer Roof Vent Fit A 1992 Fleetwood Bounder?The Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29 is an industry standard size and a very popular brand. It will work on your 1992 Fleetwood Bounder. I recommend the Installation Kit # 344270KITW for this installation.
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Written by:
Raymond P
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Adam Y
Updated by:
Isabelle B
Video Edited:
Chris R
Installed by:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug
12/28/2022
Love it ,lots of compliment’s on look being it’s a classic van. Gave lots of fellow vanners the link