SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
(82 reviews)
Price: $267.99
SuperSprings Intl
Add to cart
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
$267.99
Retail:$319.86
You Save: $51.87
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
- All Info
- Reviews (82)
- Q & A (0)
- Photos
SuperSprings Intl Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Single Axle
- 3000 lbs
- 4000 lbs
- 5000 lbs
- SuperSprings Intl
- Jounce Springs
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.
Features:
- Improves suspension, handling and safety
- Provides additional support as needed so you always have a smooth, comfortable ride
- Allows the leaf spring ample movement while cushioning light loads
- Becomes more rigid as more weight is added
- Increases stability, providing great performance while hauling heavy loads
- Raises trailer ride height
- Works independently side-to-side
- Helps compensate for off-center loads
- Reduces body roll when swerving and turning corners
- Works to eliminate trailer sway
- Acts as shock absorbers, taking the brunt of bumps and rough roads
- Reduces load on leaf spring assembly
- Extends the life of your trailer's suspension
- Designed to work with a suspension system that is in good working order
- 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included
- Maintenance-free - no tubing to run or air pressure to monitor like with air springs
- Simple, no-drill installation
- Made in the USA
Specs:
- Application: 3,000-lb to 5,000-lb single, overslung axle - springs sit over axle
- For tandem axle applications, use 2 kits
- Capacity: 500 lbs at 50 percent compression
- Do not exceed the trailer's weight-carrying capacity
- Spring dimensions: 5" tall x 4" diameter
- Compresses up to 70 percent of original height with full memory rebound
- Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2"
- Limited lifetime warranty
- 30-Day satisfaction guarantee
Note: Does not work with spring plates wider than 4-1/4".
TSS-107-40 SumoSprings 3K-5K Trailer Helper Springs w/Bracket-Overslung
Replaces SuperSprings TSS-104-40
Item # TSS-107-40
Installation Details
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung - TSS-107-40
Average Customer Rating: 4.7 out of 5 stars (82 Customer Reviews)
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.by: Dennis07/29/2024
These are great. Exactly what my trailer needed. I had to cut off about a 1/2 inch off the top to make them fit/work for the preload on the instructions, but it was easy to cut/saw with a good bread knife and they made the difference I was expecting.
by: Thomas07/25/2024
Part would not fit on my truck. Had to cut off bolts and weld the springs on.
by: James 05/30/2024
It seems to stabilize the trailer a lot better than the factory equipment. Less side to side movement and it seems that inside contents are not as bounced around as before.
by: Scott04/08/2023
I made some brackets to bolt to the frame. Now I have 100% contact with the Sumo Springs. The are working extremely well!
by: Dale07/24/2019
These were very easy to installed and have done a great job smoothing out the ride of the camper. It has made a big difference in how the camper tows and has calmed it down with crosswinds and when big trucks pass by. We did not have the clearance to install a shock kit and the tech at etrailer highly recommended these, I am glad he did. So far I am very happy with this product.
by: Darren06/18/2020
When I decided to replace the RV trailer leaf springs I decided to update the suspension by adding Sumo Springs as well. The installation was simple and quick. Between etrailer.com and Sumo Springs websites all the information is available for the do it your-selfer. Thanks etrailer.com for shipping to Canada. I will continue to support your company.
by: Conrad09/04/2022
Easy install. It took me approximately 3 hours for the entire project. That's cleaning a few things up also. I did not notice much difference in "body roll". Honestly,, I never had much before. Now, anytime going over rougher roads, railroad tracks, etc.... That was a big difference. It took a lot of that movement out. I hardly knew the trailer was going over it. I installed these on a 5th wheel.
by: Larry 12/01/2022
Help a lot with the bounce from the leaf springs
Larry
12/2/2023
Working great
by: David10/22/2020
Kit came with more than I needed but I can see where some trailers might have used different hardware and all scenarios were included in kit. I went with these to help eliminate my tires rubbing against bottom of trailer floor on rough roads "California" and give an overall smoother ride hopefully extending the lifespan of our trailer. I also Installed Dexter EZ Flex at the same time.
by: David 01/11/2024
My only complaint is that even with adding the two provided spacers, I was still a quarter inch short of touching the top rail. It is supposed to be set with a slight pushing down from the top rail. It went on easily and I am sure it will still work whenever there are significant bumps in the road.
by: Nate03/11/2023
Fantastic upgrade for the cheap factory suspension!
by: William 09/16/2023
For the money I believe its the best thing you can do to improve the ride of your trailer. Lessons the shock of the bad roads (like I-95 in south carolina) on the leaf springs and hangers.
by: Tom02/27/2021
Installation was very straightforward and they made a significant difference in pulling.
Tom
2/28/2022
Springs are still getting the job done~!
by: David 09/15/2023
Easy Installation. I'm expecting them to act as shock-absorbers, and I haven't experienced any adverse handling issues, so I guess they're working. I haven't noticed any difference in handling, so I guess that's OK. I hoped for additional capacity, too, and that's hard to measure. Sorry this isn't more definitive, but I'm satisfied that they are helping.
by: Greg02/26/2020
Simple call to identify part number needed, Fast delivery, Clear instructions, Extremely easy install.
Greg S.
2/27/2021
Great spring support solution to resolve bounce and sway! Perfect addition to our 2019 Riverstone 5th Wheel
by: Douglas08/31/2020
Was easy to install I removed the wheels which made it easy to access the u bolt flange that they mount to I moved the propane line further away from the area, took about an hour to complete install which included greasing the spring mounts.
by: Zach 06/27/2023
These helped the tow quality of my boat trailer immensely. The trailer feels so much smoother on big bumps on the highway and the gear in the boat moves around a lot less than before. Super easy to install as well.
by: Tom04/05/2021
The only reason I can't give a 5 star is that we haven't taken the trailer out yet to test the sumo's.
From the install point of view, they were great! easy to follow instructions and assembly.
My only suggestion comes from my own mistake. Maybe consider adding an additional line to your step 1. "Ensure the landing gear / jacks / stabilizers are retracted before taking measurements". I had measured and installed two sumo's before I realized the gears were still down which, obviously, messed up my measurements. Thus I had to take off the sumo's, hook up the 5th wheel, raise the jacks, then restart the process. Went smooth after that. My daughter installed one with no problem. Thanks.
Tom
4/14/2022
I believe they are working as advertised. They smooth out the bumps felt inside the trailer. I also installed sumos on our pickup. They make a HUGE difference when pulling our 5th wheel. Very satisfied.
by: Matthew09/30/2021
One year in already? Wow time flies! These sumo springs have been a GREAT addition to our 32' travel trailer. Easy to install and they've been perfect ever since. I definitely recommend these!
Matthew
10/1/2022
Still so glad we got these ... Things stay put in the trailer, no matter how bumpy the roads get!
by: Michael 01/21/2021
Great add on to our travel trailer suspension to assist in the ride of our leaf spring suspension. We also have MORryde 3000, HD shackle wet bolts , and X-factor crossmembers on our trailer as well. All of the above makes for a great towing experience as we tow our rig between 10 and 15k miles a year from upstate NY to the Rockies as well as traveling the Adirondack mountains and New England with plans for Alaska after COVID. Another great add are the Goodyear Endurance tires on our trailers....fantastic tires! We have a tpms for our trailer tires and I check tire temperature every 2 to 4 hours of travel
With an infrared thermometer.... safe travels!
by: Birdogrega10/24/2020
Easy install needed to get more spacers due to distance from spring to frame happy with results
by: Terry 02/20/2020
Although product was on back order etrailer kept me well informed on order progress which was appreciated. Seems to be a great product,untested at this time. Very easy installation ,hoping for the best.
Terry
2/21/2021
Have had a great experience with sumospings on 31ft 5th wheel,8500 miles, smoother ride and less internal movement of objects.
by: Daniel12/31/2020
Short of installing independent suspension or adding shock absorbers (did this on my 2014 radiance, DIY project, lots of upside down drilling) this is the upgrade for you. Installation and directions are straight forward and only took me about an hour to install. Due to the COVID, we were only able to take four trips since we purchased our 2020 Grand Design 303RLS and these helper springs have made a WORLD of difference. The side to side motion is less and the ride is MUCH smoother. Also changed out our fifth king pin which helped with the chucking. Highly recommend these helper springs and as a bonus, dealing with etrailer is a great experience and they are always there to help and support. Customer service is Top Notch.
by: Courtney 09/24/2022
I had always taken the clover leaf ramps on freeways slow while towing my trailer from fear of tipping. It's stupid, but I feel much better going traffic speed on the ramps now with these springs installed on the trailer. I also feel more comfortable towing with side winds. I don't have a lot of experience towing in high winds, but the few trips I have done with moderate winds felt safe.
by: Kenneth11/15/2022
Installed with EZ-flex equalizer kit. Easy to install when the suspension is lowered. Make sure to measure the gap between the springs and frame before you take off the wheels. Seems like good quality and does improve the ride.
25
82
Show More Reviews
See what our Experts say about this SuperSprings Intl Trailer Suspension Parts
- How Can I Reduce The Bouncing On My 12 Foot V-Nose Cargo TrailerYou can eliminate the bounce in your trailer and smooth your ride with the addition of Sumo Springs. You will have two options, depending on how your leaf springs are mounted on your trailer. If your leaf springs are underslung, meaning they are under the axle of your trailer, I recommend the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung, part # TSS-106-40. If your leaf springs are overslung, meaning they are over the axle of your...
view full answer...
- Recommended Leaf Spring Replacement For A 2019 Dutchmen Kodiak Ultra-Lite 283BHSLDefinitely looks like the springs are being overloaded and need to be replaced. You can use higher rated leaf springs but, the higher you go the stiffer the ride will be. Since we know the weight class with your axles the next step would be to measure from eyelet to eyelet to figure out the correct length. With the leaf spring being flat it's going to measure a bit longer than it typically would so we would just need to find something close to the measurement. At 4,000lbs we have a...
view full answer...
- Will Over/Under Kit Work With MORryde X-Factor CrossmemberHey Peyton, Yes, those things are all indeed compatible as the crossmember won't come into contact with the over/under kit. As for the correct kit, that depends on the size of your Keystone Cougar's axles. For 2-3/8" diameter axles use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00; for 3" diameter axles use the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. Then you can use the SumoSprings but you need to have between 5-5/16" and 6-1/2" of clearance...
view full answer... - Replacement Pin Box Option For A Lippert Turning Point Rotating Pin Box The Lippert Turning Point has a specific bolt pattern that only has one replacement so far, the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY48GR. This is a gooseneck adapter though so you'd have to switch out the hitch for a gooseneck ball for this to work. The torsion head will help reduce road shock and chucking transferred to your truck so it is worth considering, but you'll also be moving your pivot point back to the truck so you could run into clearance issues if...
view full answer...
- Determining The Correct Replacement Suspension Components For A 2018 Keystone Bullet Crossfire 270BHTo determine the correct replacement equalizers, bushing, wet bolts, shackles straps, etc. you'll need to do a bit of measuring first. The manufacturer designed the suspension to sit in a specific way so that it can roll back and forth so it's important to match the factory sizes. Starting with the equalizer you'll want to measure from the center to center of the shackle strap holes (horizontal) and from center of the shackle strap hole to the hanger bolt hole (vertical). You'll want...
view full answer...
- SumoSpring For A 2022 Grand Design 22RBE With Dual 3.5K Overslung AxlesFor your 2022 Grand Design 22RBE with dual 3,500 lb overslung dexter axles the correct SumoSpring kit is part # TSS-107-40. Since your trailer is a tandem axle you will need two of these kits. These are made specifically for overslung axles rated between 3,000 and 5,0000 lbs, so it will work perfectly for your camper. You can expect to see a much smoother ride with less jarring or chucking. SumoSprings will help to reduce sway and body roll. They may also raise the trailers ride height...
view full answer... - Will SumoSprings Improve Ride Quality On 2021 Grand Design Imagine 2400BH With Cushioned Equalizers?I do recommend also adding the SumoSprings Trailer Helper Springs # TSS-107-40 on your 2021 Grand Design Imagine 2400BH. These will help to absorb additional road shock the MORryde Shock Absorbing Suspension Equalizers # MR27ZR might not. They also provide stability to the suspension which helps to reduce bouncing and reduce body roll. You will need to ensure you have 5-5/16" to 6-1/2" between the trailer frame and the leaf spring u-bolt plate for the SumoSprings to fit properly. Be sure...
view full answer... - Will SumoSprings Trailer Helper Springs Increase Space Between Frame and AxleThe SumoSprings Trailer Helper Springs typically install compressed so they do tend to provide more space between the frame and axle in most cases but not by much and this is not really the goal of the system. If you don't have enough space between the frame and axle then this may be due to worn out leaf springs so I recommend checking this but I have attached the SumoSpring options below which are based on axle type and capacity. SumoSprings Trailer Helper Springs w/ Line Relocation Bracket...
view full answer... - Upgraded Equalizer and SumoSprings for 2021 Grand Design Imagine 2400BHNormally you would need to measure your equalizer so we could find the best fit for your travel trailer. Lucky for you, you have a Grand Design and they actually list their parts online. Your 2021 Grand Design Imagine 2400BH has 35" axle spacing and a 7.87" long equalizer. Based on this information the best fit is the MORryde Shock Absorbing Suspension Equalizers # MR27ZR. This fits trailers with 35" axle spacing with a distance between the outer shackle bolt holes of 8" so it is a perfect...
view full answer... - How To Determine the Correct Replacement Trailer Leaf Springs For Your Trailer For new leaf springs for your 2019 Grand Design Solitude 5th Wheel you'll need to know the axle capacity and measure the leaf springs to find the correct replacement. I've attached some diagrams below for both double-eye and slipper spring style leaf springs. I'll need measurement A for both spring types. For example, If you had a 5k axle capacity and a 30" eyelet to eyelet measurement on a double-eye leaf spring then you could use part # UG34FR. If you can get me some more info on what...
view full answer...
- Brake Line Needed To Allow Installation of SumoSprings Trailer Springs On 2022 Grand Design SolitudeYou will need the Kodiak Hydraulic Brake Hose # bh-3mfs90ff-1-5 on your 2022 Grand Design Solitude 310. This brake line has a male 90-degree fitting you will be able to attach at your brake assembly and a female assembly on the other end where you will be able to attach your current brake line. This will ensure you get the clearance you need for the SumoSprings Trailer Helper Springs # TSS-107-40.
view full answer...
- How Can I Reduce Bouncing On A Bumper Pull TrailerThere are a few things that can cause bounce with a bumper pull trailer. Generally, bias ply tires would not contribute to trailer bounce, unless they are excessively worn. Trailer bounce is can be caused by worn out suspension components. You will want to get under the trailer and give everything a good look-over. You will want to check and make sure the trailer is completely level when towing. If all of that checks out, it may be the case that you are just not towing enough weight...
view full answer... - Is SumoSprings SS26MV Same as TSS-107-47Yes, the SumoSprings # SS26MV is the same as the TSS-107-47 that you mentioned.
view full answer... - SumoSprings for a 2015 Cougar Xlite 26SAB w/ Over Slung Springs SumoSprings would help soften the bumps and be a great way to shore up your 2015 Cougar xlite 26SAB suspension. We do have a kit that is made for overslung springs that has a 8,000 lbs capacity. You will want the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket item # SS26MV. You will need one kit per axle. I have linked a picture that will show you what these springs look like installed.
view full answer...
- Troubleshooting Trailer Bounce With A 2022 Winnebago 2108FBS Micro Minnie Travel TrailerWith your trailer being so new it sounds to me like the real issue is with your weight distribution hitch. Your Husky Centerline is most likely rated too high for the tongue weight of your trailer and is giving you this rough bouncy ride. The GVWR of a 2022 Winnebago 210FBS Micro Minnie is showing up as 5,500lbs so you would want your WDH to be rated in the 400-600lb tongue weight capacity range. I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0600. This...
view full answer...
- Solution for Suspension Enhancement on 2019 Grand Design Momentum 351 M-ClassAir bags are only really found on tow vehicles so the best option is SumoSprings. Your 2019 Grand Design Momentum 351 M-Class has 7k overslung axles so the correct kit would be the # SS26MV. You will need one kit for each axle. The # TSS-107-40 you were looking at is designed for 3k-5k axles. These will give you the suspension support you're looking for while also reducing road shock and sway. Unlike air bags, they are maintenance free so you don't have to worry about them once they're...
view full answer... - Selecting The Correct Leaf Springs For a 2019 Keystone Hideout With 3,500LB Tandem Trailer AxlesIt is best to measure your leaf springs with the trailer weight off the spring. As you mentioned you have a measurement of 26.5" from eye center to eye center you more likely have the 25-1/8" Spring # e54SR. If this spring was completely flat it would have a length of 26-3/8", where a 26" Spring # e22YR when flat would be 28" long. I find it best to stay with the axle capacity springs and as a suspension enhancement like the SumoSprings Trailer Helper Springs # TSS-107-40. These will help...
view full answer... - Recommended SumoSprings Trailer Helper Springs for Jayco Jay Flight Travel Trailer There are a couple of different options for SumoSprings on your 2015 Jayco Jay Flight Travel Trailer but which one works for yours will depend on the locations of your axles in relation to how they are mounted. If your axles are above your leaf springs you will want the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket item # TSS-106-40. These are for underslung axles. If your axles are mounted below your leaf springs you are going to need the SumoSprings item # TSS-107-40 for...
view full answer... - Recommended Suspension Enhancement For Dog Trailer That Rides Rough Hey Tyler, For a 3,500lb axle SuperSprings International has you covered with their SumoSprings Helper Spring line, you'll just need to see if the axle is above or below the leaf springs. If the axle is below the leaf springs you have an overslung suspension and need part # TSS-107-40. If the axle is above the leaf springs then you have an underslung suspension and need part # TSS-106-40 instead. These jounce springs will provide a night and day difference for your trailer's ride quality...
view full answer... - Recommended 72" 2000lb Axle With Spring Centers On Top Of Axle To Make It OverslungThere is a way to make a 72" 2000lb axle overslung (axle underneath springs) but they are not sold that way. First you will need an axle. I recommend the Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs # T20BTR-7258 which has the 72" hub face to hub face measurement you are needing. Next you will need to remove the pre-installed spring seats and have the # TRSS175 welded in the correct location on the other side of the axle in the correct location to match your...
view full answer... - Recommended Suspension Helper for Stock TrailerI'm not aware of any air bag systems that can be used on trailers, but there are some great options available for jounce style springs that sit on the axles and add some extra cushion; a good example of these are the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung # TSS-107-40. These helper springs are designed for single axle trailers with 3000-lbs to 5000lbs capacity, but if you can let me know the specs on the axle of your trailer and...
view full answer... - How to Prevent Sagging on a Travel TrailerWe do have a solution for your 2015 Keystone Hideout 27DBS's sagging leaf springs. They are called SumoSprings and they provide progressive load support that gives you additional support as needed. They work great to balance off center loads like the issue you are experiencing. It sounds like the passenger side of your trailer is noticeably heavier because of a slide out or kitchen. The SumoSprings act as shock absorbers, taking the brunt of bumps and rough roads. We have two options...
view full answer... - Will SumoSprings Overslung Trailer Helper Springs Kit Fit with Ridges on U-Bolt PlateYour U-Bolt plate design will work with the SumoSprings Overslung Trailer Helper Springs kits that you're wanting to install - I confirmed this with my contact at SuperSprings. Now all you have to do is choose the correct weight rating for your trailer axle: - 3K to 5K # TSS-107-40 - 5K to 8K # SS26MV If you are unsure of your trailer axle weight rating it can be found either on an identifying sticker near the tongue of your trailer, or on a sticker in the middle of the axle itself.
view full answer...
- Recommended SumoSprings For An 2024 Alliance RV Delta 252RL Hey Lisa, To find the correct SumoSprings for your 2024 Alliance RV Delta 252RL you'll need to first check the axle capacity and see if the leaf springs sit above (overslung) or below (underslung) the axles. With the GVWR of your trailer being 8,250lb you most likely have 3,500lb axles so you'd need one of the following kits: Overslung # TSS-107-40 Underslung # TSS-106-40
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Manda E
Video Edited:
Dustin K
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Jessie B
Installed by:
Jacob H
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dale
7/25/2020
These are still going strong after a year of abuse from these horrible roads. I still feel that they have done a lot to smooth out the ride of the trailer.