bing tracking image
  1. Trailer Suspension Parts
  2. TruRyde
  3. Spring Seats
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
TruRyde

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

Part Number: TRSS300
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$10.24
Retail:$11.01
You Save: 7%
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle. Great Prices for the best trailer suspension parts from TruRyde. Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter part number TRSS300 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (178)
  • Q & A (0)
  • Videos (1)
  • Photos

TruRyde Trailer Suspension Parts - TRSS300

  • Spring Seats
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Round Axle - 3 Inch
  • TruRyde

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.


Features:

  • Welds onto round, 3" diameter axle (typical 5,200-lb to 7,200-lb axle)
  • Works with 1-3/4" or 2" wide spring
    • Cutout on flat side of seat surrounds raised knob on leaf spring to prevent turning or shifting
  • Provides extra support and secure positioning for trailer axle
    • Please note: 2 spring seats are required for each axle


Dimensions

SS-300 TruRyde Spring Seat - 3" Round Axle

Replaces 3-42 Spring Seat - 3" Round Axle





Video of Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TruRyde Trailer Suspension TRSS300 Review

Customer Satisfaction Score:


Customer Reviews

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter - TRSS300

Average Customer Rating:  4.9 out of 5 stars   (178 Customer Reviews)

The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.

by:

Need to raise my deck over trailer deck. Purchased four of the spring seats. Dropped the four shackles, pulled axels out and measured and welded them on opposite the existing ones. Refastened the shackles and installed axels under axels on new sets. Worked great!



by:

Perfect fit as described! Uploaded picture for proof. So far i couldent be happier with etrailer.com, great prices and fast shiping. I haven't had an issue with anything so i have no opinion as far as customer service goes. I would definitely recommend to a friend.



by:

No issues with the bearings



by:

Was delivered just as described. Tech help is amazing. They actual listen.



by:

Great price. Great part and built right. Ordering was no problem whatsoever and I received my order when they said I would no excuses. Again I will be ordering from these great people who put customers first.



by:

The axles that I ordered last year are still working out great. But even better than the parts was the service I got from etrailer. It was so great working with a company who took the time to listen to my project and help me get the right parts I needed, especially coming right off the heels of a terrible experience dealing with bad information and wrong parts from a competitor. Even with some damages in shipping, the returns/ and replacements were no hassle, with most issues being quickly resolved and not even costing me any additional downtime. As a contractor keeping a small fleet rolling, your competency and professionalism have made me a customer for life!! You guys at etrailer will be my first stop for trailer parts.



by:

Axles flipped, and going down the road.



by:

Just what I ordered



by:

Products were as advertised, worked well and installation went as planned. Accomplished task - moved under hung leaf springs to over axle (tandem drop) on older horse trailer, to regain bumper clearance - new truck sits higher than old, also allowed extended goose neck to eliminate tail gate damage, while leveling trailer (nose no longer stuck in air). I would purchase again without hesitation.

James K. profile picture

James K.

7/29/2021

Works as expected, Im happy with the product and results- would purchase again if I have a trailer in the future that needs a lift.



by:

exactly what they should be



by:

Received my parts today and after examining everything all looks good.
The quality of parts looks excellent and can't wait to start installing them.
Shipping was fast and arrived as they said.
Great company to buy with.
Will was very helpful and very knowledgeable about parts.
If you call would definitely ask for Will.



by:

Very happy



by:

I replaced my leaf springs, drums, brakes and added the Dexter E-Z Suspension kit to my Keystone Cougar Fifth Wheel trailer last year. This was my first time working with etrailer and I can’t say enough about how well it all went from the ordering to the install.
Tammie P did a amazing job with knowing what parts would work best on my trailer. Tammie also gave me updates on my deliveries that I appreciated. I had a trip planned short after I received my parts. So having someone at their end checking on arrival dates helped. In the future I will definitely use etrailer for all my trailer needs. Thanks again for all the help! Great Team....



by:

Good quality



by:

I installed a set of these spring mount brackets one year ago and I am glad I purchased it from etrailer. I purchased it on line just to make sure it would work on the 1964 axle that I was going to weld it to in order to complete the install of a new set of springs that I also purchased from etrailer. Everything fit perfectly and etrailer is now my go to for all my trailer needs. George J. was very professional and knew the product(s) would work. And it did!

Thank you George and etrailer.



by:

Great product and great company to work with. I ordered regular shipping and they upgraded me to 3 day shipping an no charge. Very satisfied with the product and company.



by:

Product was exactly as described. Used the info on website for location of mounts. Couldnt be happier.
Awesome customer service as well.



by:

The seats were just what I needed Last year I moved the trailer
springs from the bottom of the axel to the top when I did I had
to turn the axel end to end it caused the trailer to wear tires out .
brakes to wear out .I am turning axel back and welding new seats
leaving hubs running right. Back to factory only on top of axel.

Thank You



by:

Not much to say, they are consistent and fit the axle tube well. Clean welding material.



by:

I am using two second hand axles for my trailer and the spring seats were in the wrong place. They were hard to find because I didn't know what to call them, but I was really grateful they were available. They will complete the installation of the axles and are sturdy and cut perfectly.



by:

Fit perfect



by:

I had ordered some parts online to rebuild the suspension on one of our trailers. Customer service called me a short time later to inform me that they were out of stock on some items, they asked if it was possible to substitute some items. She was able to find the exact parts I needed in a different kit. The parts came within 3 days, very well packed, and they fit perfectly! This is the 3rd time I've ordered from etrailer and they have exceeded my expectations every time. EXCELLENT customer service and quality parts.



by:

Just what I ordered. Fast delivery



by:

what i needed for special project; narrow perch for 1935 dodge dropped axle. i needed something i could modify for my project. received quickly and im happy, thanks

Robert M. profile picture

Robert M.

3/4/2019

part still working. very happy



by:

just what I needed


25
178
Show More Reviews

See what our Experts say about this TruRyde Trailer Suspension Parts

  • Do Dexter Axles With 86-1/2 Inch Hub Face Have 71-1/2 Inch Spring Centers
    Each of the 86-1/2 inch axles we offer, such as the 5,200 lb Dexter Trailer Axle w/ Electric Brakes # 8327816-EB and 6,000 lb part # 8327826-EB have 71-1/2 inch spring centers. So what you would have to do is get new spring seats welded on at the correct position, and for that use Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300.
    view full answer...
  • Correct Bearing Kit for a Curt 5,100 lbs Axle
    Thanks for the information and picture James! Your Curt 5,100 lbs capacity axle uses item # 25580 inner bearings and item # LM67048 outer bearings. So you would need the Bearing Kit item # BK3-300, which includes both bearings, along with both races, a grease seal and cotter pin. You'll need one kit per hub. As far as a replacement axle goes you wouldn't be able to upgrade to a 6,000 lbs axle and keep the same hubs. The 5,200 lbs Dexter Trailer Axle Beam with E-Z Lube Spindles item #...
    view full answer...
  • Can New Spring Seats Be Welded Onto The Top Of An Trailer Axle Beam
    Yes, you'd just need to reach out to a qualified welder and have them weld on spring seats like part # TRSS300 to the top side of the Trailer Axle Beam with Easy Grease Spindles # e45GR. It's super common to do for people who have an underslung setup and want to raise the height of the trailer. When you remove the old axle you'll also want to replace the u-bolts with ones like part # CE23003 since they get stretched when torqued down and shouldn't be reused.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Axle for a 4,400 lbs AL-KO Axle
    Hey Shane! The closest axle we have to those dimensions is the Trailer Axle w/ Electric Brakes item # e73SR. It has a 86-1/2" hub face and a spring-center-to-spring-center length of 71-1/2". You may be able to get away with the hub face being slightly longer depending on your fenders but you'll need to use the Spring Seat item # TRSS300 to replace the ones that come with the axle.
    view full answer...
  • Parts Needed to Upgrade from a 2-3/8 Inch Axle to a 3 Inch Axle
    We do have a 3" axle with a 86-1/2" hub face to hub face measurement. It is the Dexter Axle Beam with E-Z Lube Spindles item # 8327816. The spring seats sit at 71-1/2" so you will need to move them. You'll want to replace them with two of the 3" Spring Seats Item # TRSS300 for each axle. We do not have a 2-3/8" axle in your dimensions. You will also need to replace your u-bolts and plates. You will want the U-Bolt Kit for Mounting 3" Round Trailer Axles item # APUBR-9. You will need one...
    view full answer...
  • Upgrading to 6k Axle on 2019 Grand Design Relfection 28BH
    Thankfully, Grand Design actually has some parts info we can reference, unlike any other manufacturer, so I know that your 2019 Grand Design Reflection 28BH does have 5,200 lb axles that measure 86-1/2" hub face to hub face and 68-1/2" spring center to spring center. We have an option to replace that with a 6,000 lb axle, but the spring centers will be different on the axle we offer so you'll have to have new ones welded on 68-1/2". So what you will need is the following: - Dexter Trailer...
    view full answer...
  • Replacement For 86-1/2 Inch Long 5,200 lb Axle
    Appreciate the photo, and what that shows is you have a 5,200 lb axle that is 86-1/2 inches hub face to hub face with a spring center to spring center measurement of 68-1/2 inches. We do have a replacement with that capacity and the correct length, but you'll have to have new spring seats welded on as we don't have one with the spring center measurement. So what you'll need is the following: - Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs # 8327816 - Spring...
    view full answer...
    Image 1 for
  • Replacement for 5,100 Pound 86-1/2 Inch Long Overslung Dexter Axle
    When choosing a replacement axle you want one that is the same length. Since you have a hub face measurement of 86.51" a better choice would be an 86-1/2" axle. The # e65SR is an 89" axle so it is several inches longer. Also, you don't need a 6k axle, a 5,200 lb axle is fine. You can use a 6k axle but you need to keep in mind that this will not increase the capacity of your trailer. For an axle that is equivalent to the # e65SR I recommend the # e73SR, or if you just need the axle itself...
    view full answer...
  • Replacement Axles for 2017 Grand Design Reflection 29RS
    What you're looking for is an 86-1/2" long replacement axle. Since you will need new hubs and drums, along with brakes, I recommend getting the # 8327816-EB. This has a 71-1/2" spring center length so you will also need to cut off the spring seats and weld on # TRSS300 to match the current 68-1/2" measurement. Grand Design does a great job listing their parts, but unfortunately they don't include the leaf spring information. You will need to measure your current leaf springs to find the...
    view full answer...
  • Replacement Option for 5,200 lb Dexter Axle on 2016 Arctic Fox 25R
    We don't have an exact match for all of your measurements but you can use the Dexter Trailer Axle Beam # 8327816 as a replacement. This is 86-1/2" long so it will stick out 1/4" more on either side of your trailer, something you won't even notice. The spring center is also different but that is fairly common when replacing an axle. What you can do is cut off the spring seats and weld on # TRSS300 to match your existing 67-1/24" measurement. Also, unless you're dead set on a Dexter axle...
    view full answer...
  • Different Size Equalizers on Triple Axle Trailer
    The equalizers on your triple axle setup will not be identical and there is nothing to worry about with your hanger spacing. However, since they appear to be worn it may be a good idea to go ahead and upgrade them. It looks like the Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 6,000 lbs # K71-656-00 is the closest match to what you have right now. As you can see in the kit, and others like it, there is a difference between the two sets of equalizers. The shorter...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Axle For a Grand Design Imagine 2670MK With Higher Weight Capacity
    We have either a 5,200LB # 8327816-EB or 6,000LB # 8327826-EB axle you will be able to use to replace your current 4,400lb axle. Both these axles have the 86-1/2" hub face spread and include hubs with electric brakes and the 6 on 5-1/2" bolt pattern your wheels and tires require. The brakes are the larger 12" diameter but will fit with the ST225/75R15 tires I see the Grand Design Imagine 2670M comes with. You will need to have 2 new Spring Seats # TRSS300 welded to the axle at the 68-1/2"...
    view full answer...
    Image 1 for
  • Replacement Axle for 2018 Grand Design Reflection 337RLS
    For your 2018 Grand Design Reflection 337RLS you need a 6,000 lb axle with an 86-1/2" hub face measurement and 68-1/2" spring center length. Since the spring seats can be moved, you can use the Trailer Axle Beam with Easy Grease Spindles # e33GR as a replacement. This axle matches your current axle length and has a spring center measurement of 71-1/2". You will need to cut off the spring seats on the # e33GR and weld on # TRSS300 to match your current spring-center-to-spring-center length....
    view full answer...
  • Availability Of An Overslung 86.5" Hub Face Axle Beam
    Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam # e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not able to weld on spring seats for you here, but we can sell you a few loose spring seats # TRSS300. You would just have to have them welded to the top of the axle tube in your desired location. This axle is also available in a 5,200 lb capacity # e45GR if that...
    view full answer...
  • Over-Under Conversion Kit for 7k Axle With Slipper Springs
    Hi Brian; we do not have a kit that will work as is but the # K71-385-00 will do what you need with some extra steps. The spring seats will need to be fully welded to the axle since the slipper springs shift back and forth. You will also need to replace the U-bolts since they're only 7" long. I would not replace them using your existing U-bolts so you will need to find new ones. Unfortunately, we don't have any that are 9" long. Also, the U-bolt plate is designed for 1-3/4" wide double...
    view full answer...
  • Trailer Axle With 95" Hub Face, 4" Drop Spindle and 78" Spring Centers
    The Dexter Trailer Axle Beam with 4" Drop # 8327860 has the 95" hub face to hub face measurement that you are needing. You would need to remove the spring seats from the factory and add 2 new Seats # TRSS300 to the axle in the 78" center position you are needing. This particular axle is rated for 7,000lbs. If you are needing a different weight capacity please let me know.
    view full answer...
  • Dimension Of The TruRyde Spring Seat And Compatible U-Bolt Kit
    The Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300 measures 4" from end to end, and will work with a u-bolt kit, U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axle # APUBR-9. The U-bolts in this kit measure 3" wide, 7-1/4" long, and 9/16" in diameter.
    view full answer...
    Image 1 for
  • Recommended Replacement Axle for a ALKO T44 Axle
    Hey Ken! The closest axle we have to those dimensions is the Trailer Axle w/ Electric Brakes item # e73SR. It has a 86-1/2" hub face and a spring-center-to-spring-center length of 71-1/2". You may be able to get away with the hub face being slightly longer depending on your fenders but you'll need to use the Spring Seat item # TRSS300 to replace the ones that come with the axle.
    view full answer...
  • Solution for Gaining Clearance on 2010 Xtra Tuff Trailer
    You can definitely use the # e35SR. As you said, you can cut off the spring seats and weld on new ones to match your 78" measurement. This is not a service we offer, but we do have the spring seats # TRSS300 available. Also, swapping out the springs and shackles isn't going to do what you want. The other option would be to flip the axle assuming your leaf springs are currently under the axle. For that you would need the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. This...
    view full answer...
  • Availability Of A 95 7000lb Replacement Axle
    I may have an option for you, but there is not a 7000lb axle that can be used with hubs that use the 5 on 4-1/2 bolt pattern. We offer the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 which is 95" long measured hub face to hub face, and has a spring center to spring center measurement of 80" as shown in the included diagram. If you need to move the spring centers to match your trailer you can remove the current ones and weld the # TRSS300 in the correct...
    view full answer...
    Image 1 for
  • Parts Needed to Make Over Under Axle Kit for Trailer with 7k Axles
    You'd need new u-bolts like the part # CE23003 and then spring seats like part # TRSS300 and you'd be able to make an over under axle kit for your trailer with 7k axles. Basically you install the new spring seats on the opposite side of the axle and then move the axles to the other side and secure them with new u-bolts.
    view full answer...
  • Option For Replacing 3,500 lb Axle Part Number AADULE359582
    Thanks for getting in touch, Stanley. The part number AADULE359582 you provided indicates a 3,500 lb axle with a 95" hub face and 82" spring center. We offer a 5,200 lb replacement for this, the Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs # e63GR. This axle has spring seats pre-welded at 80", so they will need to be removed and have new spring seats # TRSS300 welded on at 82". This axle tube is 3" in diameter so you will need new U-bolts such as part # CE23003....
    view full answer...
  • Will Hubs and Drums From 3,500 Pound Axle Fit 5,200 Pound Axle
    Although you could replace your existing axle with the Dexter Trailer Axle Beam # 8327816, you would not be able to use your existing hubs and drums with this axle. The wheels could still be used as long as the new hubs match the bolt pattern. Since the spring seat measurement is 71-1/2" you would also need to cut off the spring seats and put on # TRSS300 to match your 68-1/2" measurement. If you want to use your existing hubs and drums, I recommend the Timbren Axle-Less Trailer Suspension...
    view full answer...
  • 6,000 lbs Replacement Axle for a 2011 Keystone Montana
    Thanks for the picture! I couldn't get all the information I needed off of the tag but our best option to replace the axle on your Keystone Montana is the Dexter Trailer Axle w/ Electric Brakes item # 8327826-EB. This axle has a 6,000 lbs capacity so depending on your specific model of High Country it should work. It includes electric brakes and hubs with a 6 on 5-1/2 bolt pattern. You will have to move the spring seats though. These are mounted at 71-1/2" and it looks like your tag says...
    view full answer...
    Image 1 for


< Previous
123. . .6



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.