Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-11/16" Long suspension bolt features a pressed-in grease zerk that allows for easy lubrication to keep moving elements functioning properly. Castle nut included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 4 11/16 long wet equalizer bolt with the greased zerk fitting on one end. It comes with a castle nut and this is for double eye springs. Now this bolt will secure your equalizer to the center hanger of tandem or triple axle trailer suspension system. The greased zerk fitting here on this end will allow for easy lubrication to keep your moving parts functioning properly. The zerk fitting right here will allow you to grease the inside of the bushing. Basically you just put your grease gun on there, pump the grease into the zerk fitting.
It will go on the inside, come out this hole and lubricate the inside of the bushing. It does also come with this castle nut which is used to secure the bolt in place and then once you install this, they do require you to use a cotter pin to slide through there to hold everything into place. Now the cotter pin is not included. We do sell that separately on our website. The specs on this, the bolt is a grade 2 bolt. The overall length, which will be measured from the very bottom of the head to the very end, is going to be right at 4 11/16th long.
The bolt size is a 7/8" diameter bolt, 9 threads per inch. Then the nut size that installs right here on the end, that is a 1 5/16th size. I happen to have an example of a 1 5/16th socket and you can see it fits exactly on there to tighten it down. That should do it for the review on the 4 11/16th long wet equalizer bolt with the greased zerk fitting and the castle nut for double eye springs.
Average Customer Rating: 4.7 out of 5 stars (140 Customer Reviews)
4-11/16" Long suspension bolt features a pressed-in grease zerk that allows for easy lubrication to keep moving elements functioning properly. Castle nut included.We have had great experience with eTrailer, These parts came in as described.
Fits perfectly with the new 11" equalizers I replaced on my triple axle trailer. I've heard complaints they don't come with the cotter pin. They were $.37 a piece people. Just go buy some. I always use etrailer for my trailer parts. Everything is good quality, fits perfectly, and arrives on time.
Just what I needed!
This product here you looking at I couldn't found it at any trailer site or store because of the square end except at etrailer love you guys was cheap fast shipping no hammer needed fits just right..
very needed bolt
Precisely fits!!
Great product and fast shipping!
Great replacement for the slipper-leaf shackle on my dump trailer. The zerk on my OEM unit snapped off and the threads were seized. It was easier to replace, then to fix. Took me 10 minutes to remove the old one and install the new one!
I love these things. I pull heavy loads day in and day out. 3-500 miles a day everyday. I was having to replace all the undercarriage bolts and shackles once a year due to wearing the bolts in half and making the shackle bolt holes oblong shaped. There was so much slop it worried me to be on the highway doing higher speeds. I did my one your inspection and there was very little wear. And that made me happy. Last time I had to stay up until 4am with one of my workers and cut everything out from under the trailer. Then re-weld and and install everything back. It's a serious problem when you don't have time to do it. This product will help save on downtime, labor and money.
Easy to find on website with about of options as well as fast shipping and great pricing
The postal service mishandled my order and I would like to thank etrailer for sending me another package for free. I received them today. I've always had fair pricing and quality parts from them.
Would be 5 stars but cotter pin should come with item
Scott
2/24/2020
Still holding up
needed bolt
This is a must have for anyone with a heavy load. The life of my suspension has been extended, thanks etrailer!
Was just as described and worked great with the equalizers I ordered
All products received were correct, quality of parts exceeded my expectations. Etrailer employees go above and beyond for the customer, and their knowledge of products is outstanding! Will definitely return as a customer.
Good product has worked great on my dump trailer, fast shipping
Allowed me to complete repairs to stock trailer. Wish I had found etrailer earlier for the components that were sourced locally. Will use etrailer next time as my first choice source.
Good quality springs and bolts, revived the suspension on the trailer. Quck turn around and delivery.
Able to grease now, perfect fit.
Nicely made, but it doesn't come with cotter pins!
After a year, suspension is still performing just as it should. Thanks!
Greasable bolts to go with new equalizer bars. Great prices , fast shipping.
Perfect placement. Grease fitting great. Definitely worth the money
The product fit perfect and the installation went as planned. It was an exact replacement for the part.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave J.
4/23/2021
Works great! Easy to grease, and grease still flows fine into the shackle!