One end of this no-splice harness plugs into your truck's 7-way trailer connector, and the other end runs back 120" to clear your bed-mounted camper. Also great for routing wiring to your truck bed for a 5th-wheel or gooseneck trailer.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Torque lift line of wiring harness extensions for use with the super truck hitch extenders. These are available in several different lengths. Just depending on how long that hitch extender that you're using is going to be. This is Torque's Lifts 36" extension that matches their 36" super stress. If you're going with the longer super truss, get the longer. If you're going with the shorter, get the shorter. Really a nice option to where you can plug it right into the back of your vehicle, bring your power down to where it's right here, readily available and accessible for you to get to. What we're going to do is take our, what looks like a trailer plug end, we're going to pass it through our bracket.
It's just flexible enough we can kind of bend that bracket so allow it to come through. Then here's what we want, that's our 7 pole connector. We're going to be bale to hook our trailer up right here. We've got the nice safety chain connections there an then also our wiring connection. Slide that in.
We're pass our screw through the face there and then just put our nuts on the back. Now, the hardware's not provided so you'll need some hardware to pass through there. You can see our bracket's kind of got the oblong holes to make it to where it'll fit a lot of different style harnesses. I'm going to put a flat washer on to give our nut a good surface to bite to when we tighten it down. Now we can go ahead and tighten those down as well. At that point, we're mounted on, got a nice secure connection point.
We can basically just plug this right into the back of our truck. You don't want this to be hanging down underneath our hitch where it might drag or something like that. That will complete today's look at the Torque Lift wiring harness extensions for the super truck hitch extender.
Average Customer Rating: 4.9 out of 5 stars (25 Customer Reviews)
One end of this no-splice harness plugs into your truck's 7-way trailer connector, and the other end runs back 120" to clear your bed-mounted camper. Also great for routing wiring to your truck bed for a 5th-wheel or gooseneck trailer.The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
Arrived ahead of predicted time. Items exactly as described. Securely packaged. Products aligned closely with online descriptions and fitting as described by the informative videos.
Works Great, Perfect Length for my Truck Camper
I bought other extensions and splitters off a large value website and had to spend twice in the end, coming back to Tokrlift for known quality. Always high quality plugs, and heavy duty cable that is reasonably flexible in the cold.
Fast shipping and no problems thus far.
Great product, worked perfect and exactly what I needed. Plug and play and lights worked as they did not before.
Etrailer has been my source of electrical products because they have a more than one or more selection. This gives more options to choose between manufacturers and their unique features. I need to have 12 volt power with out hitching up the trailer. I use this 10 foot because my trailers are parked on the driveway and my truck is parked on the street. Now I can use the interior LED lights and my exterior high lumens auxiliary LED lights. Etrailer is great because they have so much videos making installation simple. If you have a wiring problem, their staff and technical notes are fantastic. You don't have these kind of service from a small shop, They want you to be successful and explain areas to avoid. Their website has the greatest source of securing hardware for a one stop shopping. For me, their products have spec sheets to make sure you purchasing the proper products for your design needs.
Works great!! My original connection plug is in front of the left rear wheel on the wall inside the bed. I needed a way to get back to another trailer I just got without having to rewire. Just plug and play. Saved quite a bit of time and cheaper than having the wiring done.
Excellent quality at a very far price. Worked perfect to connect my camper power cable to my truck 7 pin connector in the bumper. Didn't have to spend extra money having a pug installed in the bed of the truck.
worked as it should , used to run trailer plug to the back of a flat bed truck
This harness is very good quality, i am very satisfy. Thank you.
Super fast service. High quality product. Made in USA
Great Service and Faaaast Shipping
Took longer to arrive than expected, and have not used yet but all looks good
Thank you for great customer service and fast shipping!!
Good heavy duty product.
Excellent
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.