To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1733 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.Significantly overpriced for what it is and on top of that it’s terrible quality!
They were installed on the truck for 2 weeks, and used once when they’ve already started to rust. Even if they were made of stainless steel it’s overpriced for what you get.
When I contacted etrailer about a warranty they directed me to TorkLift. At first they were just going to send me a can of paint to address the rust issue. After I threatened to leave a poor, but realistic review they sent me a replacement set.
I’d say to wholeheartedly avoid this product but the problem is there aren’t other options…. And they know it…. Which allows charge whatever they want.
These are a no-drill installation on a 2020 Ram 3500, but NOT a simple task. A mounting plate must be sandwiched between the front leaf spring bolt and its mount, then torqued to a very high amount. During my attempt at installation, the spring mount expanded as I loosened the bolt (which required a high torque impact tool). I was afraid that the nut would come off the bolt before there was sufficient gap to insert the mounting plate. I did not have the access (or ability) to put things back together once that happened. In the end, I took the tie-down to a local truck shop who installed both sides in about an hour. In use, the tie-down is fairly discrete and works very well... just don't think that the installation will be as simple as the rear tie-downs.
Better up front research for the installation instructions would have lead me to buy this at a local shop for installation. One issue with build of unit, one hole does line up which is requiring me to modify the bracket to fit, hole is off by half a hole size.
Installation has to two issues for the backyard mechanic 1) requires the loosening of the front bolt of the rear leaf spring and subsequent re-torquing to 320ftlbs something the average person does not have the capability to do 2) the install of the bolts through the leaf spring bracket requires small hands, long pliers and a lot of patience. Long story short I am forced to take my vehicle to a local shop to complete install. Rear tie down brackets were an easy install. Product looks to be stout and i am sure will function as advertised once installed completely.
Fairly difficult to install, proper tools and a lift made it ok
Easy to install and excellent product
This is the 2nd set of tie-downs I had. The 1st set was for a 2000 pound truck camper on a 3/4 ton I had for 13 years. Worked fine. It lost the antitrust paint but perfectly safe. After a year of frequent traveling, including a lot of bumpy field/forest roads, the 2nd set is for a 3300 pound 8-11 NL camper on a 1 ton Ram and holds the load as safely as the first.
My business has been using etrailer for years and have been very happy with the products ,selections and the customer service. Kim is very helpful and knowledgeable.
Easy install instructions, gave me excuse to buy impact gun as spring bolt had such high tightening requirement. Other than that pretty simple process and do exactly what intended, keep camper on truck.
Perfect fit, although loosening the leaf spring bolts tough.
Great product. Had to take to the local truck shop to have installed.
well-engineered and solid
Excellent product and service
Customer service was very helpful
The units appeared to be well made and were nicely painted. I installed them on my F150. The tools and hardware supplied were of good quality and installation was straight forward. Two people would have been great, but I was able to install both sides in a little less than an hour. The holes all line up very well. I like these better than the previous units I had on my 2013, as they do not stick out as far - so less noticeable. The extension arms come out at a very nice angle just under the body. I find these units with quality I expected and I think they will be highly functional in attaching my camper.
Do you have a question about this Truck Camper Tie Down?
Condition: Surface Scratches
Notes: Item has cometic scratches and scrapes and is missing a few washers. Otherwise unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.