T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Recommended Hitch for a 2024 Nissan Pathfinder
  I would be happy to and congrats on the new SUV. To add a hitch to your 2024 Nissan Pathfinder, I recommend the Curt item # C46DR. This hitch is custom fit for your Pathfinder and bolts to it with included hardware. The crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. The Curt Hitch item # C46DR is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 900 lbs maximum tongue weight. This hitch will work great for towing a trailer...
  view full answer...
  
• Parts Needed To Install a Trailer Hitch Tow Package On a 2024 Nissan Pathfinder
  First you will need a Curt Trailer Hitch Receiver # C46DR to bolt to your frame. This will give you a 2" receiver which will accept a Ball Mount # C45534 for towing a trailer with a 2" ball coupler. For the wiring we have the 4-Way # TK58VR which will fit most small trailers and allow for Auxiliary Lights # C53201. If you are towing larger trailers with electric brakes which need a 7-way you will need to install our 7-Way Kit # ETBC7 with the 4-way. This will provide you with the wiring...
  view full answer...
• Trailer Hitch Receiver and Wiring Harness For a 2022 Nissan Pathfinder
  The Draw-Tite Max-Frame Trailer Hitch Receiver # DT67GR is currently the only receiver I see that is a confirmed to fit your 2022 Nissan Pathfinder. This will require you to trim a section of your rear fascia for the receiver. I do not see that there is any way to build a receiver for your Pathfinder that will not require trimming of the fascia due to the spare tire being up next to the fascia. You would need to have a several inch gap between the fascia and spare tire to have the receiver...
  view full answer...
• How To Add a 7-Way Trailer Connector to a 2022 Nissan Pathfinder
  Hello Michael. In order to add a 7-way trailer connector to a 2022 Nissan Pathfinder you'll need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK58VR. Then from there you want to add the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. After you install those 2 components it will put both the 4 flat and 7 way on the back of the vehicle.
  view full answer...
• Recommended Trailer Hitch Receiver and 4-Way Flat Vehicle Wiring Harness For 2024 Nissan Pathfinder
  The Curt Trailer Hitch Receiver # C46DR is the custom fit trailer hitch receiver I recommend for your 2024 Nissan Pathfinder. This receiver has a hidden cross tube for a clean appearance and will bolt to your frame with the included hardware and no drilling. I recommend installing the Wiring Harness # TK58VR with the receiver. This will give you a 4-way flat connector which is the most commonly found connector on small trailers you may tow. You can also use this connector to add Auxiliary...
  view full answer...
  
• 2022 Nissan Pathfinder Hitch and Trailer Wiring for 7-Way
  The Draw Tite hitch part # DT67GR is a confirmed fit for your 2022 Nissan Pathfinder and then for trailer wiring you'd want the Tekonsha part # TK58VR for a 4-way and then to convert to a 7-way you'd want the part # 37185 if the trailer does not have brakes or the part # ETBC7 if it does. Then you'd also need a brake controller like the Brake EVN # TK63VR and you'd be set.
  view full answer...
• Trailer Hitch Receiver Made In The USA For a 2022 Nissan Pathfinder
  Yes, we do have the Curt Trailer Hitch Receiver # C46DR which is made in the USA for your 2022 Nissan Pathfinder. Do note that while the receiver is made in the USA some of the mounting hardware may be imported. The T-One Vehicle Wiring Harness # TK58VR will provide you with a 4-way flat connector. This connector is needed for the lights on most small trailers you might tow as well as with Auxiliary Lights # C53201 with any hitch mounted accessory that impairs the view of your vehicle...
  view full answer...
• Correct Tekonsha T-One Wiring Harness Needed For 2022 Nissan Pathfinder Without Factory Tow Package
  You need the T-One Vehicle Wiring Harness # TK58VR that includes the additional relay harness since your 2022 Nissan Pathfinder did not come with the factory tow package installed. This harness and relay we do not carry as a separate item.
  view full answer...
• Is Just Harness of Tekonsha 4-Way Kit for 2022 Nissan Pathfinder Available
  Tekonsha does not offer us just the harness and relay from the Tekonsha kit part # TK58VR that fits your 2022 Nissan Pathfinder. The only way to get those components would be with the entire kit. This would give you a back up 4-way in case something happened to yours though.
  view full answer...
• Will Boat Trailer Lights Draw Too Much Power for T-One Wiring on a 2022 Nissan Pathfinder
  The T-One Vehicle Wiring Harness # TK58VR for your 2022 Nissan Pathfinder has the following max amp ratings: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit This is sufficient for standard trailer lighting whether it's LEDs or incandescent lights. The only time you'll need to worry about overdrawing is if you've added a LOT of extra lights to your boat trailer. If you'd like to still check on the amperage of your boat trailer you can test the draw of each of your...
  view full answer...
• Will a Trailer Hitch Receiver Disable The Hands Free Lift Gate On a 2022 Nissan Pathfinder?
  Yes, you will be able to still use the hands free liftgate on your 2022 Nissan Pathfinder with a hitch installed. Do note that the receiver tube itself will block some areas under your rear hatch, so you will need to preform the foot movement near the sides of the hitch tube. I recommend installing the Curt Trailer Hitch Receiver # C46DR. The T-One Vehicle Wiring Harness # TK58VR will give you a 4-way flat connector. This will fit most small trailers and will also allow for Auxiliary...
  view full answer...
• How To Add a 5-Way Trailer Connector to a 2022 Nissan Pathfinder
  I do have an option for you but there aren't any 5-way trailer wiring harness options for a 2022 Nissan Pathfinder. Therefore, you must first start with a 4-way, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # TK58VR which offers plug-in-play installation. This can then be adapted to a 5-way using the Curt Trailer Connector Adapter part # C57187. If you don't already have a trailer hitch which you'll also need for towing, I recommend the Curt Trailer Hitch Receiver...
  view full answer...
• Does the Curt Hitch C46DR Fit a 2024 Nissan Pathfinder?
  Yes, it does! The Curt Hitch item # C46DR has been confirmed to fit the 2024 Nissan Pathfinder. This hitch is custom fit and bolts to your Nissan with included hardware. It is a class III hitch with a 2" receiver, that has a 6,000 lbs towing capacity, and a 900 lbs maximum tongue weight. I really like the Curt item # C46DR because of the way it installs. The crosstube is completely concealed by the rear bumper of your Pathfinder. This leaves only the 2" receiver visible which not only...
  view full answer...
• Recommended Hitch and Wiring Harness for a 2024 Nissan Pathfinder w/out the Tow Package
  I would be happy to! To tow a uhaul trailer with your 2024 Nissan Pathfinder you will need a hitch, 4-way wiring harness, and a ball mount kit. For a hitch, I recommend the Curt item # C46DR. This hitch is custom fit and bolts to your Pathfinder with included hardware. It is a class III hitch with a 2" receiver, that has a 6,000 lbs towing capacity, and a 900 lbs maximum tongue weight. I like this hitch because of the way the crosstube is hidden behind the rear bumper once installed....
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?