bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Oval
  5. LED Light
  6. Red
Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
Optronics

Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens

Part Number: STL72RB
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$11.94
Retail:$22.87
You Save: 48%
Trailer Lights
Add to cart
Optronics Tail Lights - STL72RB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
6-7/16" x 2-1/8" Oval. Waterproof LED trailer tail light functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug (not included). Great Prices for the best trailer lights from Optronics. Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens part number STL72RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (679)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL72RB

  • Tail Lights
  • Oval
  • LED Light
  • Red
  • 6-1/2L x 2W Inch
  • Recessed Mount
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

6-7/16" x 2-1/8" Oval. Waterproof LED trailer tail light functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug (not included).


Features:

  • Oval trailer light serves 3 functions on trailers less than 80" wide
    • Stop light
    • Tail light
    • Turn signal light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red lens over white LEDs
  • Recessed mounts with grommet (A70GB - sold separately)
    • Mounts in any 360-degree position
  • Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately)
  • DOT compliant


Specs:

  • Overall dimensions: 6-7/16" long x 2-1/8" tall x 1-3/4" thick
  • Diodes: 10
  • Powerdraw at 12.8V:
    • Stop/Turn: 0.243 amps
    • Tail: 0.046 amps
  • Lifetimes warranty on LEDs


Manufacturer Cross Reference:
Light will work as an exact replacement for:

  • Uni bond # LED2238-13R
  • Grote # 53962
  • Peterson # M420R-2
Optronics STL72RB Oval Sealed LED Tail Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a grommet (A70GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



STL72RB Optronics LED Trailer Tail light - Stop, Tail, Turn - Submersible - 10 LEDs - Red Lens

Alternate part number: STL-72RB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens - STL72RB

Average Customer Rating:  4.8 out of 5 stars   (678 Customer Reviews)

6-7/16" x 2-1/8" Oval. Waterproof LED trailer tail light functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug (not included).

by:

I purchased $XX worth of led lights 6 marker lights and 2 ovals. The marker light had a protective wrapper and showed up pristine condition, however both ovals were thrown in the box with no protective wrapper the clear oval has a scratch but is still in good condition the red oval has scratches all over it to the point it looks used. Pretty Sad. Wish I could off included photos but it was hard to see the scratches In the picture my camera isn't the greatest.

Katrina D. profile picture
Etrailer Expert

Katrina D.

1/9/2024

I am sorry that they arrived in this condition. Let me get you over to our customer service department for them to get some replacements sent out to you.



by:

I had to replace one burned tail light on my 2005 cargo trailer. I bought two and replace the other one as well. They work perfectly. The size and the 3 pins connction are the same as the original. A little downside is regarding the packaging. I would expect each light wrapped individualy to avoid the rattling in the box. See pics.



by:

Better than expected for the price. Has held up well for a year. Looks great and seems to be a well-built product.



by:

Very nice upgrade. Much brighter and a perfect replacement for old filament lights.



by:

These lights are the best because change out is soooo easy and the initial ones lasted 9 years. They are removed with a small flat head screw driver and you snap in the new one. Great product



by:

Hooked up the tails lights today every thing is a go Thank you! Shipping was quick and easy!



by:

I have a Haulmark utility trailer. One tail light was giving me trouble and I tried fixing it but decided to just replace it with these. They are brighter and fit right in to the old grommet. They were a bit loose so I wrapped some e-tape around them and they are staying in place just fine. I also ordered the pigtails and soldered and heat-shrinked the connections - the factory connecting were "scotch-locks", which I hate. After I did this, I looked closely at the old lights and realized that there was a 3 prong plug which I might have been able to use rather than doing new connections and soldering them, but by doing what I did, I now have tight connections and I can easily replace the light if I ever have to (I got rid of the scotch locks). Yes, I could maybe have soldered the old connections and used the old plug, but it was constructed in such a way that I didn't realize it was there (I thought it was part of the light body). My picture shows the old light and the old plug disconnected from it and the new LED in place on my trailer. It works great - glad I did this. It's much brighter than the old light.



by:

Exact replacement for my needs and replaces a non-working light. Super happy!



by:

The product looks good, works, the tracking part of my order is rated as poor. The only info I got was, my order had been picked up. Some of the problem is the USPS.



by:

Perfect replacement!



by:

Prices this trailer light at my local NAPA 54 dollars for just 1 light. Glad that found you on line.



by:

These lights were easy to install and the LED light looks great.



by:

91 Dodge dually had the old bulb red marker lights put the new LED red marker lights on have attached a picture so you can see what the lights look like and we are pressing the break so that's why they're bright

Good price, fast shipping, makes yo girl look new again



by:

Etrailer is the only place I go for my trailer needs. Simply the in all aspects.



by:

works great for my trailer



by:

This tail light fit well with the associated grommet. The LEDs are noticeably brighter than the incandescent ones.



by:

Glad I forgot to order tail light from manufacturer for my tow dolly when I ordered replacement fender. Yours is perfect fit, much better price and best value for shipping of all sites I checked.



by:

Replaced all 4 lights on back of trailer and it looks great. Easy to order, fast delivery and communication every step of the way. They were incredibly easy to replace.

Mrs. Striker



by:

Perfect match to my other trailer light.



by:

The trailer light became faulty after 4 months of use.



by:

Nice, bright and easy to install. A much needed upgrade from the incandescent bulbs. Makes my boat trailer look great!



by:

Great website easy to navigate, excellent products with detailed specifications/information. Just what you need when buying online. I recommend etrailer to anyone looking for trailer parts.



by:

Very happy, no issues at all.



by:

Bright and work well so far, have not yet submerged into the lake. But a word of warning.. I was surprised the lights were just tossed loose into a shipping box. No packaging, no rubber grommets, no pigtails. Luckily both the old rubber grommets and electrical connectors were in good shape on my trailer, and the new lights didn’t get too banged up in the shipping box.

Kyle profile picture

Kyle

7/10/2022

After a year the lights are still bright and work flawlessly. Multiple dunks into the lake and no water was able to get into the lenses... would buy again!



by:

My boat is garage kept when not in use however, after 29 years it was time to replace the trailering wiring with a new wishbone harness. Very easy to do and no more issues with lights not working. Good product at a reasonable price.


25
678
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Recommended Replacement Grease Seals and Grease Cap for a Boat Trailer
    Marty, it looks like the closest grease seals we have to what you're looking for is the Grease Seal # 010-180-00. This seal has a 1.68" inner diameter, a 2.33" outer diameter, and is sold in a quantity of 1. For the grease cap (which I assume is what you meant by hub cap) you can use the Fulton Grease Cap # F001524 which has a 1.94" outer diameter.
    view full answer...
  • Grommet And Wiring For Optronics STL72RB Light
    I took a look at your Optronics LED Trailer Tail Light # STL72RB, and the only grommet I was able to find that fits this light, is the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb that you mentioned, unfortunately. Additonally, to complete install of # STL72RB you're also going to need either the Right Angle 3-Wire Pigtail for Optronics Trailer Lights # A47PB or the 3-Wire Pigtail for Optronics Trailer Lights # A45PB, depending on the orientation needed.
    view full answer...
  • Tail Light That Fits Mounting Bracket for 6-1/2 Inch Oval Trailer Tail Light 337LB1
    The Mounting Bracket for 6-1/2" Oval Trailer Tail Light # 337LB1 comes as a single piece, so for multiple you would just need to enter the number of brackets you wanted in the "Quantity" box on the product page. For the complete kit you will need a the bracket, lights, a grommet, and a wiring harness, which I'll list out for you below. - Mounting Bracket for 6-1/2" Oval Trailer Tail Light # 337LB1 - PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb - Optronics LED Trailer Tail...
    view full answer...
  • Do The Optronics # STL72RB And # STL82RCB Use The Same Bulb And What Is The Wattage?
    The Optronics # STL72RB and # STL82RCB are identical in size at 6-7/16" long x 2-5/16" tall x 1-3/4" thick and they do use the same shape/style of lens and bulb so it certainly could be used as a replacement. The 72 and 82 in the part number is not an indication of the wattage. LED trailer lights will have much lower wattage than that. I was not able to find a specific wattage listed for the # STL72RB and # STL82RCB lights, but I can tell you that other similar 8 and 10 diode LED trailer...
    view full answer...
  • Will the ST70RB and the STL72RB Both Fit on the Same Sized Light Housing?
    To answer your question, both of the # ST70RB and the # STL72RB are 6-1/2" long x 2-1/4" wide x 2-3/8" deep lights; the main difference is that one is an LED light while the other is an incandescent. I was able to find some information on your TruckLite 60283 light and the best match to replace that light is the # ST70RB , since your trailer light system is wired for incandescent lights. If you wanted to switch both lights over to LED, you would use # STL72RB but you would likely need...
    view full answer...
    Image 1 for
  • Replacement LED Trailer Lights For a 2003 Pace American JT612TA2 Enclosed Trailer
    Unfortunately Steve, I have no way to see exactly what lights came on your 2003 Pace American JT612TA2. Based on some images I could find it looks like your trailer uses the oval style light like the Optronics # STL72RB which is 6-7/16" long. If yours is a different length please let me know. For the clearance lights on the fenders they look like the snap in lights like the Amber # AL91AB and Red # AL91RB. The top 3 marker lights look like the # MCL0032RBB. These are the very common 4"x2"...
    view full answer...
  • Tail Lights, Grommets and Wiring Needed For the Buyers Products Tail Light Mounting Box # 337LB383SL
    For the 6" oval hole in the Buyers Products Tail Light Mounting Box # 337LB383SL you will need the PVC Grommet # a70gb and a Optronics LED Trailer Tail Light # STL72RB. A 3-Wire Pigtail # A45PB is needed for connecting to the light. The 2" hole on the side will use the 2" Round Grommet # A54GB and Miro-Flex LED Clearance or Side Marker Light # MCL50RB. A 2-Wire Pigtail # A86PB is needed for connecting to this light.
    view full answer...
  • Recommended Replacement Lights for Truck Lite Stop/Tail/Turn Lights on a Featherlite Trailer
    Good news, I can help find you replacement lights for your Featherlite Trailer. I was able to find LED stop/tail/turn lights that will be compatible with your Truck Lite weathertight plug. I have attached them to this page for your convenience. If you are in need of a replacement grommet as well the # A70GB will be the for you.
    view full answer...
  • Replacement LED Tail Light For Pacific Trailer
    We have LED trailer lights available. If you have the dimensions of the light you want to replace that would help in finding the right replacement for your Pacific trailer. From my research I found that some of the Pacific trailers use part # STL42RB. This is a 4-inch round flange mount light that has 10 LEDs. It is a three function stop/turn/tail light. If you need a flush-mount light, we also have part # STL43RB. this is also a 3-function 10-LED light. If you are looking for an oval...
    view full answer...
  • Replacement Running Board Lights For A 2003 Chevy Express 1500
    Like the Custer Rubber Grommet # G65G, all the oval grommets we currently carry will be designed to fit a 6-1/2" light, like the Optronics LED Trailer Tail Light # STL72RB. However, we do have the Replacement Lenses and Housings # 27-9904, Replacement Light Housings # 27-9902, Replacement Wiring Harness # 27-9903, and Replacement Bulbs # 27-9905 that are designed to fit the Westin Molded, Lighted Running Boards # 27-0015. These do look remarkable similar to your lights, but will measure...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for Image 5 for Image 6 for Image 7 for
  • Replacement Multi-Function LED Trailer Light for Glo-Brite 9852-88
    I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light # STL72RB. This is also a 10 diode LED light with stop, turn and tail light functions like the light you're replacing and also measures 6-7/16" long and 2-1/8" wide like your Glo-Brite light. The Optronics brand is synonymous with high quality craftsmanship...
    view full answer...
  • Can Trailer Lights Be Wired for Both Turn Signals and Brake Lights Using Only One Light Per Side
    You can absolutely wire your trailer for both turn signals and brake lights using only one light per side, as long as each light has either 3 wires (tail lights, stop/turn, ground) or 2 wires with a ground that goes through the mounting hardware. When using a 4-Way connector, this is very standard and typically how the trailer lights will be wired. You will have no issue wiring your trailer in this manner. I have included an article on trailer wiring that you might also find helpful.
    view full answer...
  • Grease Caps and Light Parts for 2004 Mac-Lander 16T FSWS Utility Trailer
    We can help you with grease caps and light parts for your trailer. To select correct grease caps you will need to measure the inside bore of your hubs using a precision digital caliper like # PTW80157. These dimensions need to be very precise, such as 2.30-inches as an example. The simply select the size to match, such as # F001601, using the grease cap page I linked for you. For the lights we offer both lenses only and complete trailer lights of all kinds. Links to both types of items...
    view full answer...
  • Recommended 6-1/2 x 2 Inch Oval LED Tail Lights With Wires And Grommets
    We have 6-1/2 x 2 inch lights but the wires and grommets are sold separately. I recommend the the Trailer Tail Light - Stop, Tail, Turn - LED - Waterproof - 10 Diodes - Red Lens # STL72RB along with the 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead # A45PB and the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB. This combination will give you the lights you are looking for.
    view full answer...
  • Tail Light Replacement for Vision LED TL63020
    It looks like the specs are close enough and the connector at the back of your Vision LED TL63020 R matches the Optronics LED Trailer Tail Light # STL72RB so I'd say you're good to go! If you need to replace the grommet as well you can do so with part # a70gb Attached is an installation video for you to check out.
    view full answer...
    Image 1 for Image 2 for
  • Correct LED Replacement for Optronics ST70RB Trailer Tail Light
    The Optronics Fleet LED Trailer Tail Lights # TLL12RK are a slightly longer light so they aren't a replacement, but we do have the LED replacement you need for the Optronics # ST70RB. That part is the Optronics LED Trailer Tail Light # STL72RB. This light uses the same PVC Grommet # a70gb with the 3-wire Pigtail # A45PB or # A47PB (right angle pigtail) for installation. I have added a link to a video review for you to check out as well.
    view full answer...
  • Rubber Grommet Recommendation for Optronics STL72RB LED Trailer Light
    The correct grommet you need for use with the trailer LED light part # STL72RB that you have is the part # A70GB. And if you need to wire the light or replace the connector you can use the right angle pigtail, item # A47PB, or the straight pigtail, item # A45PB.
    view full answer...
  • Trailer Wiring Recommendation for a 2005 Dodge Ram
    Since you have what sounds like a factory 4-way (or wiring) installed on your 2005 Dodge Ram you would not need to worry about circuits being installed or combined and needing the correct adapter. The harness you have for your 4-way wiring is already combined and ready to go. You can use a circuit tester like part # PTW2993 to confirm that the wires you have found are correct. If you have a 4-way on your vehicle all you would need is the part # ETBC7 to install a 7-way and brake controller....
    view full answer...
  • Replacement Trailer Taillight for Texas Pride Car Hauler
    I looked up pictures of Texas Pride car haulers and based on what I saw the Optronics LED Trailer Tail Light part # STL72RB is the correct replacement. If you need the grommet too you'd want the part # a70gb.
    view full answer...
  • Are Replacement Bulbs Available for Optronics 10 LED Oval Trailer Light # STL72RB
    The Optronics 10-LED Oval Trailer Light, part # STL72RB, is made with a housing that is sonically sealed to make it waterproof. This means that there are no user-replaceable parts inside.
    view full answer...
  • Direct Replacement Oval Stop Turn and Tail Light for a Model J-60 Trialer Light is the # ST70RB
    Yes, the J-60 light is a 6-1/2 inch wide by 2-1/4 inch tall light that is 2-1/4 inches deep overall so the Sealed, 6-1/2 inch Oval Trailer Stop, Turn and Tail Light, 3-Function, item # ST70RB, is a direct replacement for your light. If you need a replacement grommet for the light you can use the Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB, and if you need to wire the light or replace the connector you can use the right angle pigtail, item # A47PB, or the straight...
    view full answer...
  • Replacement Tail Light for Utility Trailer With Command Electronics 003-5400
    The Command 003-5400 light doesn't give me specific dimensions. Base on some research it appears the Optronics # STL72RB may be a replacement option. I've attached the measurements for this light to assist. The Optronics # STL22RB is a similar light with overall dimensions of 6-1/2" long x 2-5/16" tall x 2-1/4" thick. This light uses grommet # A70GB for flush mount as well so even though they are different they mount in the same way. If you can give me dimensions and a photo of the...
    view full answer...
    Image 1 for Image 2 for
  • Can Boat Trailer Lights Be Used on a Camper?
    You can absolutely use boat trailer lights on a camper. The trailer lights for boat trailers are the same in function they just are sealed for submersion instead of just water resistance. I've linked the page for all of the submersible trailer lights to assist so you can get the style and function desired. I've attached an article to assist with lighting requirements for trailers to assist.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Hannah L
Updated by:
Hannah L
Employee Matthew E
Updated by:
Matthew E
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Ryan G
Installed by:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.