This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange. Designed with a weathertight connector.
Features:
Specs:
This GloLight has a weathertight plug that's designed to block out moisture. It needs a particular adapter (AL45PWTB - sold separately) to plug into a 3-plug pigtail and connect to your vehicle or trailer. Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) if you don't have one already.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're reviewing part number STL111RFMB from Optronics. This light is in their GLOLight series. It's an LED Stop/Turn/Tail Light with a flange mount. It also has a weatherproof connector. You have a red lens over all the LED lights. You have a band of LEDs that go around in an oval like this.
You have in the center a row of LEDs that will serve as your brake and turn signal lights. I'll show you that in just a moment. This light uses surface mount technology. That protects the LEDs from moisture, shock, and vibration and distributes heat evenly. You have a poly-carbonate mounting flange built in, so that makes the installation very easy. This does require a weatherproof connector.
If you do not already have one, then you will need to get this part, which is sold separately. It's Optronics part number AL45PWTB and it's their three-wire straight plug and weatherproof connector. As you can see, it has a yellow rubber gasket around here that helps to keep it waterproof. You plug it into the back of the light and it has a little clip here that helps to keep it in there securely. As you can see, I'mpulling very tightly and nothing is happening.
You can be assured that that will stay in. The other end, of course, needs a power source. You want to plug that into your standard three-prong plug on your trailer. We have a three-prong plug here that's attached to a portable power source. I'm going to plug it into that. We will turn off the lights and turn on the power.
What you see there is the tail light. Here is your brake light and your turn signal. We can turn the overhead lights back on. This light does meet all the requirements of the Department of Transportation for automotive lighting. It measures 6 1/2 inches left to right, side to side, 2 1/8 inches tall, and it's 1 1/8 inch thick. There's a lifetime warranty on the LEDs and a three year warranty on the housing and the wiring. There you have it for part number STL111RFMB, the Optronics GLOLight LED Stop/Turn/TailLight with a built-in flange mount. .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.