This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange and works with 3-prong plugs.
Features:
Specs:
This GloLight has a standard 3-prong plug that connects to your vehicle or trailer with a PL-3 pigtail adapter. Pick up the right-angle pigtail (A47PB - sold separately) or the straight pigtail (A45PB - sold separately) if you don't have one already.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're reviewing part number STL111RFB from Optronics. This is a 6 1/2 inch oval glow light LED stop, turn, and tail light with a standard three prong connection, which you can see here. This is an innovative tail light that serves as the brake light, the turn signal, and the tail light. It has an outer band of red LEDs as you can see here and that's your tail light. This band of lights does get brighter when you apply your brakes. In the center you have a row of red LEDs and those will light when you apply your brakes or use your turn signal.
You also have a red polycarbonate housing and lens which are sonically sealed and water proof and a built in polycarbonate mounting flange for easy installation. This light uses surface mount technology and what that does is protect the LEDs from moisture shock and vibration and it allows for thinner construction. This light meets all the requirements for automotive lighting from the Department of Transportation. It uses, as I said, a standard three prong plug. If you don't have one you can purchase this separately from our website.
This is the Optronics right angle three wire pigtail plug, part number A47PB. Now let's see how this works. Sorry, let's do it the right way. Get that in nice and tight. Now we do have a portable power source.
We'll plug the light into that using these connectors. The black wire is for power. The red wire is your 12 volt and the white wire with the ring terminal is your ground. Remember that your ground wire should always be installed on a clean, unpainted metal surface. Now we can turn the power on, turn our overhead light off and there's your tail light.
Now this band of lights will get brighter when you apply the brakes like this and there's your center row of lights. That's your brake light and this is your turn signal. Now we can turn our overhead light back on. This light measures 6 1/2 inches from side-to-side. It's 2 and 1/8th inches tall and it's one inch deep, or thick. There's a lifetime warranty on the LEDs and a three year warranty on the housing and the wiring. That's it for part number STL111RFB, the Optronics 6 1/2 inch oval glow light LED stop, turn, and tail light.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.