To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount this light-weight, user-friendly plow to your front or rear-end 2" hitch and let the 82" blade do the work. All you need to do is drive. Plow is fixed in a straight ahead position, blade automatically raises and lowers when needed.
Features:
Note: Bottom of 2" receiver tube must be 8" to 16" from the ground
Specs:
Front or rear mount? Versatility is SnowSport 180's middle name. It is shown here rear mounted (in the plowing position) and front mounted (in the transport position).
Installation is quick and simple - just slide the included shank assembly into your 2" hitch receiver and secure with pin.
Once the plow frame is connected, attach the blade by lifting one end at a time onto the frame's holders. The lightweight aluminum blade construction makes lifting or adjusting an easy, one-person job. Secure the blade in either transport or plowing position with the plow's snap pins. The low-profile design won't block your headlights, and the transport position is secure enough for highway travel.
If using with a rear-mount receiver, simply lower the blade to plow position and back up as usual. For a front-mounted plow blade, just drive forward with the blade in the plow position. The unique design takes the hassle out of plowing: This device has no hydraulics or complicated wiring. The push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you are ready to reverse your driving direction, the blade lies back, skimming over the surface of the ground until you change direction again to plow.
Handy blade markers extend vertically from the ends of the plow to help you see where you are plowing.
With the SnowSport 180, plowing snow is as easy as backing out of your driveway. Once you are finished plowing, simply lift the blade, refasten it in the transport position and head off for work or errands.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today Ill be reviewing the Agri-Cover SnowSport 180 Snowplow for Two Inch HitchesThis Agri-Cover SnowSport 180 Snowplow allows easy snowplowing without the hassle of complication controls or hydraulics. The versatile design of the snowplow allows for front or rear mounting. The snowplow has a rust resistant aluminum blade, which allows easy operation for one person and a long-lasting heavy duty rubber cutting edge for supreme durability. It is safe to use on grass, concrete, gravel, brick and other uneven surfaces. The practical design of the plow does not block the headlights in the plow position or the transport position.
Its easy installation works with any front or rear two inch trailer hitch receiver, which is sold separately. The spring loaded safety pins prevent the pins from rattling out. The bottom black rubber cutting edge is six inches tall by one inch thick. The overall blade dimensions of the plow are 82 inches wide by 14 inches tall. The approximate weight of the blade itself is about 56 pounds.
The SnowSport Snowplow is made in the USA and comes with a three year limited warranty. Now that weve gone over some features and specs of the snowplow, well demonstrate how to set the blade into the transportation mode. Well set the square brackets onto the cutouts of the square tubes. Well then insert the rubber spring safety pins into the tops of the square tube to prevent the blade from coming off. As you can see, the bottom black cutting edge is far enough from the ground to allow you to transport the blade without hitting any objects.
Now with our blade in the transport position, well show you how to transfer from the transport position to the plow position. Well first off by pulling out the spring loaded safety pins from the top of the square tubes. Well lift up the square brackets around the square tubes and slide them all the way down allowing the bottom black edge to rest on the ground. We will then replace the spring loaded safety pins into the tops of the square tubes. As you can see, the bottom black cutting edge of the blade is on the ground and were ready to plow.
Now that weve gone over some features and specs of the Agri-Cover SnowSport 180 Snowplow, well demonstrate its uses by plowing some snow. After arriving to our snowplow site with our blade in transport position, well put the blade into the plow position by removing the pins and setting it to the ground. Now well start off by plowing the snow with our hitch at the front of our vehicle. With the snowplows lightweight design, we can easily switch from the front hitch to the rear hitch for more versatile snowplowing. That completes todays review of the Agri-Cover SnowSport 180 Snowplow for Two Inch Hitches.
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
Mount this light-weight, user-friendly plow to your front or rear-end 2" hitch and let the 82" blade do the work. All you need to do is drive. Plow is fixed in a straight ahead position, blade automatically raises and lowers when needed.I assembled Saturday , all went well with the instructions provided. We had a small amount of snow over the weekend but not enough to try it out.
Work like a dream on my 2019 Subaru outback. Thought it would take some getting used to but no five passes and the driveway was done. Took about 10-15 minutes almost took longer to hook it up and take it off.
The drill marks on the blade were incorrect. The blade was marked for a wider mounting assembly. Fortunately, I caught the error before drilling any holes and adjusted the blade mounting brackets accordingly. So either the blade should have had a wider mounting assembly, or the blade was mis-marked. Generally, the assembly and installation was straight forward and simple. I have limited physical abilities, but manage to handle this unit solo. I've only knocked out a 2" snowfall so far, but it functioned very well.
I am happy with the product, price, service and shipping time. Some of the hardware was missing with the original shipment and etrailer sent me the missing parts, that's good service.
At 72 years old it was pretty easy to assemble. It's not too much work pto lower the blade. I've got 95 feet of driveway. Think it will greatly reduce the time clearing snow. Also I live in Wisconsin.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
1/21/2025
Well shoot! I hate to wish bad weather on you but I hope youre able to put it to the test soon!