AcmeClamp Installation Tool for SuperSprings - Medium/Heavy Duty

Video Transcript for Hands-On with the AcmeClamp Installation Tool for SuperSprings

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at the SuperSprings SuperClamp Installation Tool. This is a U-bolt with a steel cross plate and an acme-threaded bolt that's specifically designed to help you install your medium or heavy duty SuperSprings on your vehicle. This is a heavy duty tool that's going to pull down a steel SuperSpring so you can install your roller in the correct position on the shackle. This is going to have a inner width of approximately three and a quarter of an inch. And then at our max height when we have it fully extended there, our inner opening height is gonna be about nine and three quarters of an inch tall.

This is made here in the USA. It is gonna be very simple to operate and just get it installed around your spring, and then we can tighten it down. That's going to give you that nice clamping action so that you can make sure that your springs are gonna be nice and tight where you need them to be so that you can get that roller installed in the correct position on your shackle. This does come with a limited lifetime warranty, so if you we're to have any issues with it you're more than welcome to reach out to us. But overall, I think this is gonna be a great way of making it much easier for you to get your SuperSprings installed.

That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.