This E track fitting locks into any standard or Snap-Loc E track anchor. A slot at the top of the fitting allows you to slide the fitting over any 2" strap so you can secure the strap to your E track. The sturdy, zinc-coated steel resists rust.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to be taking a look at the Snap Lock E-Track fitting with a 2 inch wide slot. This E-Track fitting locks into a standard or snap lock E-Track anchor. This slot allows the fitting to slide over any 2 inch wide strap, so it is going to let you secure the strap to your E-Track anchor system. It is going to feature the spring-loaded point right here. It makes it very easy to mount the fitting, just pull back on the lever to snap into the E Track and then release it to let it secure in place. It is made from a zinc-plated steel so it is going to be strong and durable. It is also going to do a great job at resisting rust and corrosion. If we take a look at the overall length, measuring from edge to edge . Measuring from this point here to the very end is about 3 and 1/16 of an inch. To the base portion is about 2 and 3/4 of an inch.
The E-fitting . Or excuse me the E-Track fitting like . Basically measuring from this indention to the same point on the other side, so measuring the space in between, that's going to give us a measurement of about 2 and 1/8 of an inch. The slot length for the strap, that's going to give us a width measurement of about 2 inches. This does have some capacities to it. The maximum load or brake strength is 4400 pounds.
It's going to feature a safe working load limit of 1,467 pounds. That's going to do it for today's look at the Snap Lock E-Track Fitting with a 2 inch wide slot.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.