You can swing your RV TV away from the wall, swivel it around and tilt it down - we think that's perfect for family movie night. And you can lock the mount in place so your TV doesn't rock back and forth during travel.
Features:
Specs:
If your TV is crammed into a corner and you want to unwind with a good movie, swing the mount up to 180 degrees away from the wall. You can also almost fully swivel the mount around so the whole family can see the screen, and tilt it up and down 12 degrees to help reduce any glare.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. To figure out your TV's mounting pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a look together at this RV TV wall mount. Now this mount is going to secure your RV's flat screen TV to an inside wall in your RV or camper. And this wall mount and the arm are aluminum, and the TV plate here is steel. And as you can see, it does feature the VESA mounting patterns. And on your screen, I wanna show you all of the patterns that are available with this plate.
And this is going to work with TVs up to 55 inches. And this has a maximum load capacity of 52 pounds. Now the TV plate, I do have just loosely assembled here. I just wanted to give you an idea of what this was going to look like. This plate is just going to attach on the pins here, as you can see, and then you'll just secure that with the included hardware.
But this is going to allow you that full tilting motion, which we'll talk about later. But for now, I'm just going to remove that and talk about the arm itself. The full-motion mounting plate and articulating arm is going to swing 180 degrees away from the wall. And the arm and the swivel are going to allow for 350-degree positioning. So this is going to be easier to see the screen from anywhere in your RV.
The full arm extension is gonna be about 17 inches. And then let me go ahead and just push this back all the way. As you can see here, we do have a locking pin. Hopefully you can see that there. And so I'm just going to push this in.
And then that's going to prevent this mount from moving around while you're traveling to the campsite. It's going to hold the arm to the wall mount with the screen parallel to the wall. And the spring-loaded pin is going to be released with this hanging chain pull. And when you have this completely collapsed like this while in the traveling position, this is going to stick out about 2-7/8 inches from the wall. And then when you're ready to extend this, you're just going to pull this pin. And obviously, this is gonna be a whole lot easier to do when this is mounted to the wall. So I'm trying to just give you the best demonstration I can here with it in hand. So that chain is going to release that locking pin, and then that's going to allow you to extend this and position that TV while it's on this mounting plate wherever you want, giving you the best mounting view. Now putting the plate back on here, I just wanted to again show you the full range here of tilt, the tilting range rather. So this is going to allow you to position the screen at just the perfect angle for viewing and help reduce glare. This is going to tilt upward 12 degrees and downward 12 degrees, so whichever is going to be best for you. And the included plate locking knobs are going to prevent screen movement while traveling. This is gonna be all the hardware that you're going to receive here in this little bag. This is going to be a bolt-on installation with the included mounting hardware. Obviously some drilling may be required depending on your particular application. But this is a very solid piece of equipment. Very well-built, very well-designed. Instructions are also going to be included to walk you through that installation process. Well, I think that's gonna wrap up our brief look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.