Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Pair these U-bolts with axle tie plates (sold separately) to mount your 3" axle to your trailer's leaf springs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this MORryde trailer axle U bolt set. This set is going to feature four of these U bolts that will work with the plates which are sold separately to attach one trailer axle to your leaf springs on your trailer. You can see, we are going to have four of these bolts and nuts and washers included to get them mounted in place. Now, these are right at 3 inches wide.
So they are going to work for your 3 inch diameter axle which is typically your 5,200 pound up to 7,000 pound axle. The bolt diameter is a 1/2 inch when I measure this. Total height, it's right about 7 3/4 of an inch. And the inner height there, the outer height, is close to 8 1/4 of an inch. So not exact measurements, but pretty close there.
Obviously you can tighten those nuts to make it fit your application. Just make sure that you're going to be able to work with that set up there. These do come with a one year limited warranty. So, if you we're to have any problems with them when you're installing them or something like that you're welcome to reach out to us. But they are made here in the USA.
So you can trust they're made to high quality standards and it should do a really good job for you of getting that axle mounted in place. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (57 Customer Reviews)
Pair these U-bolts with axle tie plates (sold separately) to mount your 3" axle to your trailer's leaf springs.Was great with working with Odelia again. Was able to get the longer length U-bolts needed for the 8000LB. Leaf springs. Will be installing on my 2017 Grand Design Solitude fifth wheel rv. The shipment came a week early and packaging was great.
I started a review but got disrupted, I was actually trying to fill out a customer service ticket, it looks like the box was beaten up during shipping and I seem to be missing 2 Ubolts and and a u bolt plate, I have attached a picture of the box when it arrived and the parts that we received. Is there anything you can do to replace my parts?
Needed longer U Bolts for new spring and shock installation. Good quality U Bolts.
Exactly what we needed for suspension u pgrade
Not thrilled with these. Although I haven't had the RV out time will tell. My concern is that on prior u bolt / spring installs I've done the nuts had friction while being installed. These I could turn with my fingers down to the plate. So there's no cutting of the threads, no heat expansion / collapses of the nuts. Will be checking the torque after the first time out.
Great kit, really beefy high quality components, nice powder coating. Because my axles are above the leaf springs which I believe is relatively rare, the kit needed some modification, not too bad if you're handy and have additional tools. This kit is a no brainer for axles underneath leaf springs, pretty much bolt on from seeing the eTrailer videos, dramatically improved ride quality on my 20 mile test drive, looking forward to our next trip.
Worked as needed
Order was recieved quickly, Quinn stayed on top of the shipment.
Great service,great product now days this is a thing rare commodity. The service people are the best Thanks
Very, very heavy duty u-bolts! Needed the extra length in order to add thicker leaf spring top plates, these definitely did the trick. Don’t let the price scare you, you get what you pay for.
Leslie
10/16/2022
Installed the heavy duty u-bolts on our Cedar Creek 5th wheel RV for two reasons…1 upgraded the leaf springs from 7K to 8K springs due to some slight sagging with the originals, 2 installed Road Master shock absorbers and needed the extra length on the threads. Honestly, these u-bolts are extra heavy and fix perfectly.
Easy ordering with quick and accurate d elivery.
Thank you Martha… this was an excellent experience fast service .
Very good, working well!
Great product exactly what I needed to do the job and fast shipping
These are very good quality. They last long and resist rest penetration.
They look strong but a little pricey compared to others that are a 1/2" shorter. I guess you pay the price if you need it.
Seem to be good quality. E trailer shipped quickly.
I had a special project. I needed some good bolts for the front axle.
Roger
7/18/2024
These U bolts are much more robust than OEM for a 7,000 lb axle. They are longer as wel. I had to replace the OEM U bolts when installing the RoadMaster shock kit.Worked great.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
10/4/2023
Yes, we can certainly have the missing u bolts and plates sent out to you. Our customer service team will contact out and have the parts sent out.