Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The thick channel plates and welded gusset on this steel ball mount make it perfect for heavy-duty use. Tow up to 10K with the 2" ball or 14K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.
Features:
Specs:
This adjustable ball mount has a maximum capacity of 14,000 lbs, making it ideal for heavy-duty towing. The steel construction is strong enough to handle large trailers and heavy cargo, and the matte powder coat finish will protect the ball mount from rust and corrosion, even after repeated use. The BulletProof Hitches adjustable ball mount gives you the strength you need to tow your big loads. And its durable, long-lasting construction can stand the test of time.
Because of its sturdy steel construction, this BulletProof Hitches adjustable ball mount can handle loads up to 14,000 lbs, making it perfect for heavy-duty towing jobs.
The adjustable channel is made of 5/16" thick, laser-cut steel plates. These steel plates can handle high capacities without bending. And because of the laser cutting, the channel plates have consistently sized pin holes, so you can easily remove or reposition the hitch ball platform.
A 1/2" thick steel gusset is welded between the shank and the channel, bracing the mount and keeping the channel from bending, even at the maximum drop or rise.
The steel shank easily slides into and out of your hitch receiver. And with no sharp edges on the shank, the powder coating is less likely to chip and peel.
Each adjustable mount includes a 2-ball platform, which fits in the adjustable channel. The 2 hitch balls are welded onto the solid steel platform for maximum strength and stability.
Finally, the pins and clips included with the ball mount are made of heat-treated steel to withstand the heavy weight from your load. And the zinc finish provides corrosion resistance.
To set up this BulletProof Hitches adjustable ball mount, insert the 2" x 2" shank into your hitch's receiver. Slide the 2-ball platform into the adjustable channel, then use the included pins and clips to secure the platform at the height you need. If you need to switch hitch balls, just remove the pins and clips, flip the ball platform over, and reinsert the pins and clips to secure the balls in place. It's that easy.
This BulletProof Hitches adjustable ball mount is compatible with a wide variety of accessories (sold separately). Instead of using the included ball to tow, you can install a weight distribution shank (358WEIGHTDIST) in the channel of the mount to attach your weight distribution system. Add a clevis (358CLEVIS) or shackle attachment (358EDSA) for off-road or recovery operations. Or simply add a hitch step (358STEP) to easily access your truck bed.
Average Customer Rating: 4.9 out of 5 stars (460 Customer Reviews)
The thick channel plates and welded gusset on this steel ball mount make it perfect for heavy-duty use. Tow up to 10K with the 2" ball or 14K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Fast delivery, well packed, and the hitch is bad a**, heavy duty quality and very versatile. If your looking for an adjustable hitch this is what you want!!!
This hitch ball mount is a beast for sure. It has a nice appearance and a lot of weight. i do not see it letting me down at anytime. i also think that spacers could be provided to eliminate excess play. The web site is greatand was very helpfull. However, once ordered i thought the etrailer logistics, in house tracking process was a little misleading, if i see it is packaged not sure why it did not ship until 2 days later. of course, i am not on the ground not seeing everything going on might change my mind about the last comment. Thanks
Excellent parts and fast delivery. Will buy from again if I need more trailer towing equipment
The hitch looks very well made. I recently made some changes to my 02 F250 and needed a drop hitch.I mostly pull a #10000 GTW equipment trailer but occasionally pull a #14000 GTW dump trailer and a utility trailer with a 2" ball. This hitch fits my needs perfectly.
Great help from all staff
The hitch looks great. I put a No rattle bracelet on so that it’s nice and tight, Took my trailer out for a test run and it’s never pulled this good..
Our hitch arrived fast. The box was marked a different size than what we ordered. A quick phone call to them helped us determine what we received was what we ordered and needed. Thank you.
Works great
Have used this many times over the last year. It is nice to always have the right ball size and offset no matter what I haul. Two things I've done to improve my experience. I machined a small plate to wedge between the ball unit and receiver yoke to remove slop and rattle. If the trailer is light and bounces a lot, this is nice to have. I also cut off the bottom hole as there is no trailer that has needed this much offset, plus it was too close to the ground (2020 Ram 1500 4WD) for comfort. This was done precisely with a bandsaw and then ground smooth, radiused and painted. You can not tell it has been altered. I am very happy with this hitch and have recommended it to friends.
Adjusts perfectly for the different trailers I pull and is heavy duty enough for all loads.
Easy to install. Fit just right into the receiver. I pulled my 10k horse trailer. It was so tight there was no jerking or bumping when starting out or stopping. Great hitch!!
I bought this hitch because I don't like to get caught short. Very solid and stout. I use it for my business to haul a 6000 lbs. trailer with a large compressor on it. Turn it up, let it hang, it still does the job and allows my trailer to remain level as I drive. If you are on the fence about this hitch, go ahead and jump off and get it. I'm getting another one but I'm going to get the 4" drop/rise.
We couldn't get a uhaul when escaping Oregon because so many people are leaving the state. We ended up buying two cargo trailers and doing the move to Texas in 3 trips. The hitch worked with no problems. Hitch is on a 2018 Ram 2500HD. This hitch is the swiss army knife of hitches. Any configuration you need this hitch can do it.
Outstanding, extremely heavy duty, great textured finish. This Bullet Proof Hitch (MD206) 2-Ball Mount is hands down top shelf quality. And made in USA!! Note; If purchasing receiver locks, save a few bucks and buy the etrailer e98881 3-5/8" span lock instead of the Infinite brand 3-7/8" locks. The etrailer lock secures with 3-1/2 turns from key for a perfect tight fit.
No doubt would recommend!! Will not be diappointed.
etrailer is professional, great care in shipping, and good prices!!
this thing is amazing....gone are the days of switching hitches around, or worse-trying to switch ball sizes...this thing is well built.
Phil R.
5/12/2021
excellent, still love this thing
Always great pricing and fast shipping, the product is outstanding
Delivered on time and the unit is high quality.
Great item that appears to be perfectly built, fit and finish is amazing. Packaged securely in a box so that nothing was damaged in shipping. I waited a long time to spend over $200 on an adjustable hitch but glad I bought this brand and type of hitch. I seems very solid and will last a long time. Now my two different trailers will finally be hauled down the road level.
Super stout, make sure to get the accessory clamps to keep it from rattling
I purchased this hitch over a year ago to put on a lifted 2016 F-150 to pull a 22' camper. The hitch is very well-built hitch that has been frequently used on a variety of trailers. I now use it on a 2020 F-350 and it still works great.
This is a super hitch. Etrailer is really easy to work with and customer service is awesome.
It lives up to its name. I’ve been completely happy with this hitch and it’s versatility
I love this hitch. Having the flexibility is amazing. It is a little heavy, but it is heavy duty.
I was impressed with the rapid delivery as well as the ease with knowing when the package would arrive. The adjustable hitch was exactly what I expected and wanted. Thank-you
Two words describes this thing; Bad A[**].
If you want a hitch to end all hitches, get this. Fit and finish are second to none and the look is amazing. You will not be disappointed!
Do you have a question about this Trailer Hitch Ball Mount?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim H.
1/24/2022
Still as good as day one. It is used a lot. I change offset and flip the ball constantly based on the specific trailer. It is nice to have JUST ONE hitch for everything I pull.