Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the lid for your MaxxAir MaxxFan Deluxe 4-speed fan (MA00-05301K or MA00-05100K). White color.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a quick look at this replacement white lid for the MaxxAir MaxxFan Deluxe. Now, if you are needing to replace the lid for your MaxxAir MaxxFan Deluxe 4-Speed fan, then this is the lid you are going to need. Specifically, this lid will fit model number MA00-05301K. And as you can see, this is made of an opaque white plastic and this is going to be an easy install and what's even better is your MaxxFan does not have to be removed from the roof to install this replacement lid.
To replace the lid, you would simply locate the screws holding the hinge to the unit itself and remove the screws from that lid that you are replacing, and then remove that lid and replace the screws with this new lid. Now, since this lid is the replacement from MaxxAir, you can trust that it is going to fit your MaxxFan Deluxe 4-Speed fan. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Average Customer Rating: 4.6 out of 5 stars (33 Customer Reviews)
Replaces the lid for your MaxxAir MaxxFan Deluxe 4-speed fan (MA00-05301K or MA00-05100K). White color.I needed to replace the original lid because, if the bushings are not well greased upon initial installation, the arms that raise and lower the lid and screen will eventually rip the lid hinges right out, breaking the lid cover, allowing rain in your vehicle. I have two of these units and while one has been flawless, the other broke, causing me to believe the installer makes the difference. When you receive the Maxx Fan Deluxe, the lid and exterior unit are fully assembled. You connect the interior portion with the exterior. When replacing a lid, you have to access the hinge screws on the previously assembled exterior unit. These screwheads face the top of the vehicle with, depending on install, an inch or less of access room. So lid will need to be open for smaller hinge access and then exterior unit removed from vehicle to access the larger hinge screws, as well as remove/regrease bushings. It is not simply access the hinges for a clean swap. You will likely want to replace the bushings while at it and re-grease the tracks. The bushings should not cost $13 a piece, that is ridiculous, but mine fell off when the unit cracked the lid and had been miss placed. You will also need to open and close the lid while re-assembling so it isn't a one man job, at least not conveniently and simply. Otherwise, the lid is an exact replacement of what you originally received. etrailer has been easy enough to work with although interaction has been minimal. I like that they want reviews and make it easy to leave.
Our max fan replacement lid fit perfectly. E trailer was great at helping me find the correct item. It arrived quickly.
Always get exactly what you ask for with etrailer! The replacment lid fit perfectly and looks great. Thanks!
Just getting around to installing. On the roof. This is incorrect size. It's about 8" too long and about 1" too wide. Can I return this item. I apologize for the inconvenience. I've tried one other place and no one has it.The lid looks great. There is no number on the old one except the name Max air. I just need one smaller
Can I return this for credit or exchange if I can get size info.
We needed a replacement cover for our MaxxFan and Lori at eTrailer made selection and purchase very easy...a pleasure working with these folks, and the purchase arrived in plenty of time. Thank you!
Item arrived quickly and complete with all hardware. This is to include front and rear hinges installed along with the inner track ways, both left and right. Make sure to replace both inner bushings, and check lifting lever as the initial failure was with the bushings wearing causing the lever to jam, break a weld, and crack the cover. A yearly inspection, and cleaning of moving parts should be performed on the MaxxFan to prevent failure.
David E.
3/7/2023
After one year the product performs perfect. But the key is the install. I used a little silicone grease on the bushings. And I do not try to open the hatch in freezing cold weather.
Arrived intact, dispite the magenal packeging having been mangled.
Really poor design, the fan lid mechanism pulls strongly down on this plastic lid in order to seal it in place. The old one cracked along the mounts after only two years, and was leaking as a result. One year after I installed this replacement lid, I can see the stress marks on it as well where it is being strongly pulled down by the lid mechanism, so I know it's only a matter of time before this one cracks as well and starts to leak. They need to redesign this lid and reinforce the area where the mechanism connects to the lid.
Amazingly fast service & delivery. Than ks.
Product was in stock. Arrived in a timely manner in good condition. Product from original manufacturer. Installed easily. I replaced the smoke colored lid as the smoke colored lid actually let in more light which I didn't want in the bedroom area.
Chuckiem
1/14/2022
So far the product is still as I had hoped. I will let everyone know this though. When Im not using my travel trailer it is stored inside my shop, out of the elements. I only use my travel trailer about 3 weeks a year. The other 49 weeks it sits indoors.
Item as described…well packaged, item arrived quickly and undamaged.
Maxxfan is poor quality, I've already had to make a homemade patch on replacement lid, I've had to replace the operating mechanism, and lift motor. Now the control is erratic, it's lost its mind. This fan cost $50 to $100 a season in parts to keep it operating since purchase in 2017. New cost was about $ 300.
Fast delivery, perfect fit and easy to replace.
Hard to find RV replacement vent cover was in stock and delivered for free quickly. etrailer happily honored their price match policy. Thanks and will shop again with you.
Just got it haven't got it put on.
Very fast shipping ,great customer service and contact, will be using etrailer again. Thanks etrailer
Received replacement lid two days earlier than promised during purchase!
A perfect replacement.
Best customer experience!
Exactly what I needed! Thanks
Have not sized it yet to see if they will fit. However, Terri offered excellent customer service!
Excellent service
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
10/26/2023
I can definitely get you to someone that can work on a return for you. You should hear back from our customer service department soon.