See what our Experts say about this Optronics Trailer Lights

• License Plate Bracket With Light that Has 4-Way Trailer Wiring Connector
  Is this for a front plate you are looking for a light for additional visibility? Or a license plate light for the rear and you want to use like 4-way trailer wiring connection?
  view full answer...
• How To Wire LED License Plate Light bracket LPL55CB To Exiting 4-way Trailer Connector On Vehicle
  I would be happy to help! To install the Optronics LED Trailer License Plate Bracket # LPL55CB on your 2018 Subaru Outback Wagon and power it through your current trailer connector you will just need to get a trailer end 4-way connector # 18004. You will connect the black wire from the bracket light to the brown wire on the 4-way connector, and the white wire from the bracket light to the white wire on the 4-way connector using heat shrink butt connectors # DW05744-5. Keep in mind that...
  view full answer...
• How To Wire LED Trailer License Plate Light For Cargo Carrier To A 4 Way Flat
  I have a solution for you to hook up the Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB to your 2021 Subaru Ascent without tapping into the wiring. You could install Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48" # HM38134 into the 4 way flat plug at the back of your vehicle which would provide you with 4 bare wires. You could then wire the white ground wire on the LED lights to the white wire on the Hopkins 4 way harness. Then...
  view full answer...
  
• How To Wire License Plate Light/Bracket With 3 Wire Connection
  Most Trailer License Plate Lights with a Bracket like the Optronics # LPL55CB you found are only going to have 2 wires a power and ground for the light. It looks like yours has either an additional light for either a reverse light or brake light. While I cannot tell who manufactured your light you are most likely going to have to test the light with a 12 volt battery to determine which wires are power and for which function and which is the ground. Typically white or black are the most...
  view full answer...
• License Plate Mounting Bracket Solution for Ladder on Class B Motorhome
  Thank you for all of the details and photos! For your application I recommend using the Thule License Plate Holder for Bike Racks # TH35JV along with the 6' Long Roadmaster Extension Loop # RM-300150-00. This gives you exactly what you're needing and eliminates the need to hardwire connections like you'd need to do with the LED Bracket # 328-003-70BE or Optronics # LPL55CB. The Thule bracket also comes with straps to mount it so you can wrap those around your ladder rungs which will not...
  view full answer...
  
• Putting a License Plate and Tail Lights on a Bike Rack
  For the license plate, you have two options. You can use the Yakima PlateMate License Plate Holder for Bike Racks # Y02713. This uses a hook and loop strap to attach to your bikes or your rack and is quick, easy, and temporary. The downside to this style is that it isn't lighted, so you would either have to avoid driving at night or go with the second option. The second option is a LED Trailer License Plate Light w/ Bracket # LPL55CB. This will require cable ties or drilling to secure...
  view full answer...
• Recommended License Plate Relocation Bracket to Use with the Roadmaster Spare Tire Carrier
  To relocate your license plate if the Roadmaster Spare Tire Carrier # RM-195125 is blocking it, you can use the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens # LPL55CB. This bracket does come with a 5 diode light that you can wire in so that your new license plate bracket can illuminate the license plate. I've linked a short review video of this for you to have a look at.
  view full answer...
• How To Add License Plate Lights To The Yakima PlateMate Licesne Plate Holder For Bike Racks
  Hardware is not included for the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens Item # LPL55CB, but you can make a trip to the local hardware store and pick up some bolts and nuts to secure the license plate, light bracket, and Yakima PlateMate License Plate Holder # Y02713 together. 2 bolts hold everything together and secure the whole setup; the bolt holes measure 5/16" so you will want to get bolts that are no bigger than 5/16" and make sure to get bolts...
  view full answer...
  
• How to Wire Illuminated License Plate Holder to Trailer Connector
  To wire an illuminated license plate holder such as the Optronics LED # LPL55CB, you can simply splice into the running light circuit and ground wire from the trailer connector. I recommend using the 2 Wire Loop # 9651P to make these connections. This will allow for a quick and easy disconnect when you are not using the cargo carrier/rack on your trailer hitch. I have attached a couple of short video demonstrations on these products for you to check out.
  view full answer...
• Bike Rack Blocks License Plate and Taillights of 2014 Subaru Crosstrek XV
  To be perfectly honest with you, I have never once heard of this occurring, but I can certainly understand your concern. There is nothing available that's specifically designed to relocate your license plate, but you could probably fabricate something using a license plate bracket/light like part # LPL55CB and a cargo carrier light kit like # 20174. Light brackets like part # BK70BB would be needed to mount the lamps to the bike rack. You'd also need to install a trailer wiring harness...
  view full answer...
• Lighted License Plate Holder for Use on a Trailer
  I do have a taillight with integrated license plate holder but the Bargman LED Recessed Double Tail Light part # 47-84-527 would not allow for this. Instead, you would want to use the ONE LED RV Tail Light part # RVSTLB0061 which does have an integrated license plate holder. If you would like to use the Bargman LED Recessed Double Tail Light then you would want to also use the LED Trailer License-Plate Light w/ Mounting Bracket part # LPL55CB as this could be mounted in any visible location...
  view full answer...
• What is a Recommended License Plate Light for a Cargo Carrier?
  The best option for you to use a license plate light with your Pro Series Cargo Carrier, # 63153, would be to get the available cargo carrier light kit, # 20174. The kit plugs into a trailer wiring harness on your vehicle for turn, stop and running light functions. After that, the LED Trailer License-Plate Light with Mounting Bracket, # LPL55CB, can be mounted on the carrier and lit by tapping into the running light circuit wire from the light kit.
  view full answer...
• Light Kit To Illuminate The Yakima License Plate Holder For Bike Racks
  In order to illuminate the Yakima PlateMate License Plate Holder for Bike Racks # Y02713 I would look into Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB. This LED light kit uses the common 2 wire design; the black wire connects to positive wire and the white wire connects to ground. You may need to use 10 Gauge Primary Wire - Blue # 10-1-1 (sold per foot) in order to run the necessary wiring from your vehicle to the license plate light. I have attached an installation video...
  view full answer...
• Using Optronics Hardware # LP52HP to Secure License Plate to Factory Flush Bracket on New Trailer
  The Optronics Hardware Kit # LP52HP that you referenced is indeed the best option we have available for securing the license plate to the factory bracket on your new travel trailer. This kit is designed specifically for the Optronics brackets like their LED # LPL55CB, which has a really similar design to the one in the picture you attached. I can't say for certain that the nut won't rub up against the surface of the trailer, but you can compare the depth of your bracket's mounting holes...
  view full answer...
  
• License Plate Bracket Recccommendation For Trailer Hitch Mounted Cargo Carrier
  The legality of an obscured rear license plate varies from state to state. If you want to heed the letter of the law, the plate can be relocated to the rear of the cargo carrier. We sell quite a few cargo carriers, and to be honest, it is really not that much of an issue. You could zip tie the plate to your carrier, or use a bracket with a light like part # LPL55CB (In most states, the rear license plate is required to be lit after dark). If your vehicle has a trailer connector, you...
  view full answer...
• How to Install a License Plate Light on a Cargo Carrier for Use in California
  I believe I have a solution for you, but it will require you to install trailer wiring on your 2010 Toyota Prius. For trailer wiring you will want the Tow Ready wiring harness part # 118505. This will give you a 4-way with a running light circuit that you could use to power a light for the license plate that would only come on when your headlights are on. You will then have to mount a lighted license plate bracket on your cargo carrier like the part # LPL55CB. You will run the black...
  view full answer...
• How To Mount a License Plate On a Haulmark Utility Trailer
  I don't have any information specific to any one particular trailer but what I can tell you is that most license plates are mounted under the driver side tail light. In fact, most driver side tail lights even have a bracket for the license plate as well as a light that points down from the tail light to illuminate the license plate. The Low Profile LED RV Tail Light part # RVSTLB61 for example has the license plate mount and light as mentioned above and can then be paired with the Low Profile...
  view full answer...
• License Plate Bracket With Light Kit For Hitch Mounted Bike Rack
  I recommend instead, to use the Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB. This product already has a built in light that will run off of 12V DC power, and can mount anywhere you'd like. Hardware is not included, however, so you'll need to supply that yourself.
  view full answer...
• Making License Plate Light Kit Adapter for Spare Tire Carrier
  To make a license plate light that you could add to your spare carrier you could use the part # LPL55CB to provide the light and plate bracket and then for wiring use run a # HM48110 to it so that you could plug in when needed. Basically you'd run the brown wire of the 4-way to the black of the light and then the white to white and you'd be set.
  view full answer...
• License Plate Holder and Light for Use on Ramped Utility Trailer
  You can add a license plate holder and light to your ramped utility trailer either with a single item such as # LPL55CB or # PM436B, or you can choose separate plate holders and lights to let you choose the designs you most prefer, such as plate holder part # CR30830 and light part # LPL12CKM2B. It may be easiest to use one product; my choice would be # LPL55CB since its LED light uses much less power than a typical bulb light (only about one-tenth as much power). You will make a 2-wire...
  view full answer...
  
• Trailer License Plate Holder with Light for a Haulmark Trailer
  We have license plate mounting brackets that have lights but there isn't a version of # LP35BB that has a light. We have # LPL55CB which has an LED light or # LP55CB with an incandescent bulb.
  view full answer...
• Recommended License Plate Mount For Fender of Car Hauler Trailer
  Yes. I recommend using the License Plate Mounting Plate - Black # CR79150 or the CE Smith Trailer License Plate Bracket - Tail Light Mount - Aluminum Tread Plate # CE26053A to add a little more style. If you need a light with your mounting bracket, I recommend the LED Trailer License-Plate Light w/ Mounting Bracket, 2 Wire, 5 Diode - Clear # LPL55CB or the Peterson License Plate Light with Bracket # PM436B.
  view full answer...
• Installing 2-Wire Lighted License Plate Bracket on Trailer
  When wiring a 2-wire license plate bracket, such as the Optronics LED # LPL55CB, you are correct that the white wire will be for ground and the black wire is used for the running lights. The white wire from the bracket should be attached to a clean, bare metal surface on the trailer frame for a secure ground. As you mentioned, the brown wire on your trailer is most likely the correct wire to tap into for the black wire on the bracket, but you will want to verify this by testing the wires...
  view full answer...
• How To Wire Up the Optronics LED Trailer License Plate Light
  In regards to the Optronics LED Trailer License Plate Light part # LPL55CB, the black wire is for power and the white wire is a ground. The black wire will be hooked up to the running light circuit which is usually a brown wire. If you have a ground circuit nearby you could tap into this or just use a screw and ground it straight to metal.
  view full answer...

Do you have a question about this Trailer Light?