Aluminum Liger Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Gunmetal

Lionshead Trailer Tires and Wheels - LH25FR

16" x 6" Trailer wheel has 6 on 5-1/2 bolt pattern and 4.25" pilot diameter. Rustproof aluminum wheel has a 6-spoke design in black. Steel inserts in lug nut wells secure wheel.

Features:

• Aluminum wheel is durable, lightweight, and rustproof
• Liger Series 6-spoke design in gunmetal
• Automotive-grade clear coat finish on the front protects from scuffs and scratches
• Steel inserts in lug nut wells help to keep wheel securely in place on trailer hub
  • Prevent holes from wearing down
  • Eliminate the need for constant retightening of lug nuts
• Valve stem is included
• Center cap sold separately
• Meets DOT specifications and SAE J1204 standards

Specs:

• Rim dimensions: 16" diameter x 6" wide
• Bolt pattern: 6 on 5-1/2"
• Wheel bolt size: 1/2"-20 and 9/16"-18
• Capacity: 3,300 lbs
• Pilot diameter: 4.25"
• Offset: 0
• Limited lifetime structural warranty

Steel Lug Nut Inserts

This aluminum wheel comes with steel inserts in the lug nut wells. The inserts are pressed into the aluminum, and they help prevent the holes from wearing down over time. This ensures that the wheel stays secured to your trailer hub and that you won't have to constantly retorque the lug nuts.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

JFLG-160-600-6GMF Lionshead Sumec Liger 16x6 Aluminum Rim - 6 on 5.5 - Gunmetal Gray - Light Black