Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the suction cup mount for your Furrion Vision S wireless RV backup camera system (FOS43TASF) with a 4.3" monitor.
Features:
Note: If you have a Vision S camera system with a 5" or 7" monitor, order part number FR79SR.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement suction cup mount for the Furrion Vision S wireless RV backup camera system. Now this part will replace the suction cup mount on your Furrion Vision S wireless RV backup camera system that has the 4.3 in size monitor. That's part number FOS43TASF, and that system we do sell separately on our website. Basically this mount will allow you to mount your monitor or your camera system anywhere you want. The monitor will just snap onto the ball of this mount and allows the monitor to rotate to any positions that need it. This part will include one suction cup mount, and then just show you how it mounts.
I have like a metal surface here, so you could just put your mount on here, and then if you just push down with your lever right here on the back as you push that down, it'll form a suction and you can see there's no way that's going to be moved anywhere.And then to remove it, just pull back up on that, and then pull up on the little tab here to remove the suction. But again, it can be put on anywhere you'd like. Push down on that, and it'll hold it into any position. And to remove it, just pull up on it, and pull that tab to release it. Very simple.
But that should do it for the review on the replacement suction cup mount for the Furrion Vision S wireless RV backup camera system.
Average Customer Rating: 4.5 out of 5 stars (235 Customer Reviews)
Replaces the suction cup mount for your Furrion Vision S wireless RV backup camera system (FOS43TASF) with a 4.3" monitor.Pay attention to the ball and socket mount in the 2nd photo before you order. The ball is way too small to work in that hole. It's the wrong mount for the Model FOS05TASF 4.3" monitor. I was sent 2 that were identical and had a 15.7mm ball instead of a 22.5mm ball. If you have that model monitor do not order the LC776462. The price is good but it won't fit. They just gave up trying to help after sending me the same incorrect part twice. Did'nt call Lippert/Furrion to figure out they were showing the wrong part on the web page for that model and apparently don't have the right one.
After the suction for my campers backup camera had a melt down because of excessive heat on my windshield I went looking for a replacement. I went to every RV and Car place within 30 miles of home and could not find one with the size ball to fit my monitor. One place I visited looked up online and found what I needed in less than two minutes and suggested I order one online as it would be cheaper than him doing it for me. I did what he suggested and four days later I have the correct part in hand. Next time I’ll do that first as I probably spend more in fuel cost driving around than I did for the part.
Thank you…
This is a difficult mount to find with the 16.5mm ball, so glad I found it here. I noticed this is sought after, perhaps because the one that come with the original back-up camera system breaks without abuse. Shipping time wasn’t bad, even with a holiday weekend as I noticed etrailer.com actually shipped the item same day, thank you.
This mount is correct and fit perfectly, just as expected.
The suction cup tore on the original one so I bought a replacement. It does work but the camera is looser on the replacement but it does work.
Service and shipping from etrailer was excellent. Ordered item 4/2/2024 and received 4/5/2024. I called 4/5 with a question on how hard to push suction cup into mount hole on a 4.3 in Furrion camera monitor and received helpful tip from Danny. You have to push vey hard to seat the suction cup ball into the monitor hole. Once in it seems secure but there is limited directional movement. From the back of the suction cup to the ball is only 3” so for my application on a 2024 Chevy pickup the arm is rather short on a windshield attachment. Furrion uses a proprietary ball mount so you are prevented from using other aftermarket longer arm mounts.
Left attached to windshield and the sun melted the rubber suction cup. Suction cup detached from the mount. Recommend taking off the windshield when not in use.
This is the second one of these I’ve had to buy as the suction cup brakes off of the plastic mount inside due to the heat of the windshield. They really need to make this product better. This is no issue with etrailer, but Furrion needs to improve this product.
We have been using this replacement part for a year niw in the brutal Florida heat and it’s holding up well.
If and when we need to replace again I’ll for sure come back and re-order one from here
Perfect fit and fast delivery!
Worked as it should!
Very simply process/website, quick delivery and everything turned out perfectly
This mount does Not fit this monitor. The ball is way too small
Katrina B.
5/2/2022
This item is designed to replace the suction cup mount for your Furrion Vision S wireless RV backup camera system [part # FOS43TASF] with a 4.3 inch monitor. Can you please confirm that you have the Vision S with a 4.3 inch monitor? I cannot see what size screen you have in the photo you provided.
Becky D.
5/2/2022
I ordered a 7 inch monitor.
Finally obtained the correxct replacement part needed for my Furrion. Info provided by eTrailer about this item was key in deciding to order this replacement mount.
Perfect fit to replace the broken mount!
Your description is not very clear as to which one fits the 5 or 7 inch Furrion Vision S. As many of your reviews have stated mine also did not fit my 5” monitor. Now I have to pay $[XX] in shipping for the return when the product only cost $[XX] to begin with. I guess I’ll just be throwing it in the garbage!
Brooke M.
1/23/2023
This part is for the 4.3 inch monitor. If you have a 5 or 7 inch monitor, you will want part # FR79SR. I am sorry for the confusion and hope this clears it up for you.
Great communication, fast shipping, and follow up. Highly recommend!
Thomas
11/15/2023
The product failed. The suction cup came loose just like the original one that came with the camera.
This worked really well. The original one that came with the kit had broken after four years when the clear plastic suction base tore and separated from the black plastic base. The replacement appeared to be identical and has worked well for us for a year now.
Item arrived quickly and was exactly what I needed.
This appears to be good quality and shipping was fine. Unfortunately, it doesn't fit the 4.3" monitor that I bought at the same time. I expected, since I was ordering all three parts (4.3" Monitor, cord and mount) at the same time that this would have been verified before shipping as it should have been obvious that the mount was intended to go with the ordered monitor. I am reaching out for a replacement that will fit the monitor I ordered.
Jenny N.
9/29/2022
This suction cup mounted is a fit for the 4.3 inch monitor. I checked and I see that it looks like you received the wrong part and we have shipped a replacement to you.
you always have the part i need!
etrailer was the only source I could find for this mount. Even the Furrion didn't have it in stock. Identification of the product and check out was simple and quick. Delivery time was within my time limits so all is good.
It arrived quickly and it fits.
I have the furrion vision S and this mount does not fit it. The end that pushes into the monitor is a lot smaller than the hole on my monitor.
Jenny N.
9/20/2022
This mount is meant to be used with the Furrion Vision S wireless RV backup camera system part # FOS43TASF with a 4.3 inch monitor. If you have a 5 inch monitor or a 7 inch monitor then you would want to use part # FR79SR instead.
The plastic ball/part that pulls the suction cup from the windshield when the lever is pushed shattered after 10 uses between 2019 and 2023, rendering the mount useless. Partially because of the super strong grip (5 Stars) and the cramped design (3 Stars)
Received it in good condition
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rick
7/23/2024
Performing as expected. The new suction cup has not seen a temperature above 110 deg. F where as the one I replaced had seen up to 118 deg F which could be a contributing factor in its failure.