Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Just the bones - replacement setup comes with everything but the electrical. Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. Get your 5th wheel back into action!
Features:
Specs:
Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame. If they don't, the new brackets will need to be welded on.
You should be able to swap out or upgrade your current landing gear a new set--even it's from a different brand name--as long as you get the following 3 measurements right:
Each weld stop is usually about 1" wide, so if you get measurement 1), just add 2 inches.
Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs. For these legs to work, you'd need a set of landing gear strong enough to lift no less than 3,500 lbs. And, yes, it's okay to have some legs with a weight rating that is higher than your trailer's pin weight. In fact, they should operate more efficiently, allowing you to spend less time cranking and more time camping.
Note: Do not use landing gear to lift your trailer or RV during tire changes or service work, because doing so will exceed the capacity of the landing gear.
California residents: click here
This was just what I needed. The legs work perfectly. The only reason I gave 4 stars instead of 5, there were pieces missing from the shipment and I had to purchase the missing items from a local hardware store. Also one gear box was locked up and I had to take it apart to find a piece of a wire tie inside blocking the gears. Once the piece of plastic was removed works like a charm. The fast delivery makes up for the slight inconvenience. The legs are holding my 5th wheel up with pride.
The shipment arrived in good shape and is working well. I will recommend you.
Had some issues with the mounting brackets that were in the trailer. We didn't use the brackets that came with the kit as that would have involved cutting out the old brackets and welding in the brackets that came with the kit. We were able to get the legs installed with minimal effort and the rest of the installation went without any other issues.
Receved order on time and everything went well during reassembly. Thanks for helpjng me get all the right parts
I received my new landing gear, and it was what I expected. I have not installed it yet, but after putting a temporary fix on my old unit last year, I'm sure this unit will work. The packaging is not great, I actually thought the gear box that came with was used it was so dirty, but it has no installation marks on it, so I believe it's new. The trucking company used drove off my driveway cracking the edge of the asphalt, so I'm not real excited about that either. Other than those two things, it will work...
Steve at Etrailer.com did a great job walking me through the all the parts I would need to fix my landing gear. The landing gear went in really easily and looks to be very well made.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Jenny N.
4/25/2022
I will have our Customer Service team reach out to you