Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
AJ: What's up, everybody It's AJ, with etrailer.com. Today, we're going to be checking out this Lippert fifth wheel landing pad replacement part. You can see there's one here on our landing gear already; I'm going to pop this one off there and show you how easy it is to install this one. Now, there's nothing wrong with the current landing pad, but I just wanted to show you how easy it is to install it. So we're just going to pop out this pin, it pulls off that, and then we'll take our new one. You can see it's a little bit different; it's got this in the center.
That's what the bolt is going to run through. You can just push this up there, line up the holes there, and re-insert our pin. Now you've got it installed.It comes in a quantity of two, so this is the other one that we don't have installed, so we can see them side by side. They're the exact same, as you can imagine. It's actually got a 9" diameter, so that's how big of a footprint it's going to have when it's sitting down on the ground.
That mesh is the one we took off there, but maybe yours is a little bit smaller and you want more of a footprint. This is going to help you do that. This is just going to give you more grip on the ground; that way, if it's soft, muddy ground, or sand, or gravel, something that shifts around, the bigger footprint is going to help you not have any sinkage with your rig when you put the landing gear down.Another thing to think about is, when you're bringing your landing gear down and the metal, the concrete, contact. You don't want to damage the concrete; you also don't want it to slip or cause any issues. I would recommend getting one of the jack pads that we have from inaudible 00:01:43.
This is rubber; it's got a 1" diameter here that's going to protect the concrete, and your rig, when you're bringing in and lowering down the landing gear. That way it doesn't have uneven concrete or anything like that. It's not going to damage or push down on there, and the metal is not going to slip or anything. It's going to be nice and gripped with this rubber pad.Another thing I want to point out, the new landing pad versus the old one, is there's actually holes in the new one, and that's going to help water if it pools up in there; it just doesn't sit here and slowly erode away, it actually can drain back down there and not cause any issues.That does it for our look at the 9" landing pads from Lippert. I hope this helped..
Average Customer Rating: 4.9 out of 5 stars (52 Customer Reviews)
So nice not to fuss with placing boards under the feet when parking.
One time easy install, looks great and provides excellent stabillity
This was a nice addition to my 5th wheel. I added the rubber pads. Now very stable when parked.
Bent a foot pad on landing gear and this was an exact replacement. One bolt up the bottom and it’s replaced.
Everything as advertised no issues
The Lippert foot pads were a great addition to my 5th wheel. The factory feet were bending and starting to sink into the ground because of the reduced surface area. Instead of having to carry extra boards around I replaced them with these foot pads. Work great, larger surface area, and well made.
Our trailer came with these 9" round pads. One night we noticed one was gone. The pin either failed or someone unclipped it and stole it.
This is a perfect replacement for the feet on the Northwood Artic Fox AF27-5L self leveling system.
Actually I think this is an improvement over the OEM feet as the mounting hole for these feet fit a 3/8" bolt nicely.
I've replaced all the pins with bolts and nylon lock nuts. People can still steal them but it's gonna be a lot tougher.
Good product, fast delivery.
Part fit perfectly and performed per expectations. Slide is still working good and we have no complaints.
Also purchased new landing gear pads. Very easy installation.
Having first looked at the landing pads and thinking that they were right - wrong - mistake. Calling etrailer got me to the right person to look up what I should have ordered. Having agreement from my looking and customer service, found the right product. Delivered in timely fashion (altho had to pay for faster delivery) put the part on my fifth wheel today and fit right on. Best when ordering check dimensions of what you need carefully. Sometimes what is written as description is not the same as what you need. Check before ordering. Any questions - etrailer customer service was more than helpful and fantastic to work with. Give etrailer a try!
Out of stock when ordered but kept in contact with me and was notifde as soon as item was shipped, easy to install and heavy duty and looks great
Herbert G.
9/1/2018
Working great no problems
Landing gear foot pads fit outstanding and installed as expected with ease.
These feet are GREAT! They did not fit our Atwood Landing gear but they are fantastic! Wish they did. Good weight, and very stable.
These were great replacement foot pads for my corroded factory pads. Great description on the website helped me choose exactly what I needed.
My 2 local RV shops just about laughed. “Good luck finding THAT part”. etrailer not only had it they shipped it so fast!!! Ill be saving money in the future by not wasting gas driving to my local shop. etrailer has everything I need
Lippert products and service - always excellent! Same with etrailer.
I have been looking for these for months. Finally found out about etrailer and with Nicoles help they arrived today. Will be adding etrailer to my email list for other trailer parts as I need them.
Even with a possible back order I received my parts quickly and all great ?? Definitely do business with them again. Thanks Bob
Product was exactly pictured and described; exactly what I needed. Item was promptly shipped and arrived in great condition.
Ed S.
4/1/2022
Great, no problems!
They look used/scratched on the bottom and top and need to be repainted which I will do. Other than that, they look good
Great product fit perfect will be doing more business with etrailer
Selection of parts and service on line was excellent. One big negative was the wait time on the phone - tried to call 3 times and finally hung up each time after long wait time on hold.
This product is exactly as expected and what I was looking for. A great upgrade to the lackluster OEM.
Exactly as described and fit perfectly. Great customer service - alerted me that a similar item I was going to purchase was on back order and let me swap it out with this one instead - I never would have know and I've already received and installed before the back ordered item would have even shipped. Super fast shipping!
These were much stronger than the original square feet.
My husband replaced the foot pad in about 10 minutes. Product looked just like original prior to a tight turn mishap :-) Quality product. Easy to use website. Fast shipping. Will visit for future needs.
The foot pads are large and easy to install. But $110 for two pieces of steel is over priced.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roaminggypsies
9/4/2023
The pads are still working like champs! We have been in some tight spots, and have banged the leveling legs on some rocks over the last year. Although I bent one of the base plates, I was able to replace the plate and pop the pad back on. Excellent invrstment.