Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for coastal or snowy areas, these Dacromet- and KodaGuard-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (L68149) and outer (L44649) bearings.
Features:
Specs:
If you tow a boat trailer, live in a coastal area, or experience a lot of snow, slush, and salt on the roads, you know how corrosive salt and water can be. Because disc brakes last longer than drum brakes, you should consider how things like rust might impact your trailer over time.
The Dacromet coating on these brakes offers great corrosion protection, even with frequent use in freshwater and saltwater. It can withstand 300 to 400 hours of continual exposure to salt spray before corrosion begins, which is comparable to galvanized steel. And the KodaGuard coating on the calipers offers even better corrosion resistance, as it can withstand 500 to 600 hours of salt spray before rust forms. So - unless you're driving your trailer through water for 2 weeks straight with no chance for the brakes to dry - it'll be a while before any rust starts to form.
Say goodbye to the days of your truck being pushed and pulled by your trailer. Disc brakes provide a safer, more comfortable ride than drum brakes. They offer shorter stopping distances and deliver consistent braking - even at highway speeds. So, you won't have to worry about things crashing around in your trailer or camper next time you reach unexpected traffic on the highway or debate if you can actually stop before that yellow light turns red.
More and more people are switching their trailers over to disc brakes. Not only do disc brakes provide more controlled braking than drum brakes, but they also save you money by having fewer parts to maintain.
Unlike drum brakes, which have springs, magnets, and shoes that may need to be continually adjusted or replaced, disc brakes are virtually maintenance-free. There are no springs, cables, or other little components that you'll need to worry about failing.
The brake pads will naturally wear down, so eventually you'll have to replace them. But these pads are also way easier to replace than drum brake shoes. The caliper - where the pads are housed - is located on the outside of the brake assembly. This means you just have to remove that one part to replace the brake pads rather than having to remove the entire assembly like you would with drum brakes.
This particular kit can save you time and money over other disc brakes on the market as well. A slip-on rotor may be easier to install initially, but water can find its way between the rotor and your existing hub, causing uneven rotor wear or runout. With a 1-piece hub-and-rotor assembly, water and debris can't get in to cause any corrosion or contamination.
In addition, vented rotors, like these, disperse heat faster than non-vented rotors. When brakes retain heat, they are more likely to experience brake fade, or loss of braking power. So even if you take your boat or camper out every weekend, these trailer brakes will continue to offer excellent performance throughout their long life.
Kodiak disc brakes have a unique caliper mounting bracket as well. The side-support design puts all of the weight on the mounting bracket instead of on the bolts. This reduces premature wear and extends the life of the bolts, further ensuring optimal performance.
If you want to remount your existing wheels after installing these brakes, you'll need a kit that offers the same bolt pattern. To determine the bolt pattern, count the number of bolt holes (or lug nuts) on your trailer's wheel. This will give you the first number in the pattern. To find the second number, just measure the distance between a bolt hole and the bolt hole across from it.
For example on wheels with an even number of bolt holes: 6 on 5-1/2" means 6 bolt holes with 5-1/2" from the center of 1 hole to the center of the hole across from it.
And with an odd number of bolt holes: 5 on 4-1/2" means 5 bolt holes with 4-1/2" from the center of 1 hole to the farthest edge of one of the 2 farthest bolt holes.
Average Customer Rating: 4.3 out of 5 stars (23 Customer Reviews)
Perfect for coastal or snowy areas, these Dacromet- and KodaGuard-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (L68149) and outer (L44649) bearings.Finally completed the installation after dealing with a useless set of mounting hardware - see separate review. Recommending getting your own mounting hardware based on the dimensions of what you have to work with for axle mounting brackets.
Otherwise, the installation went together fine. Recommended watching the videos available on the website.
The hardware looks top quality. Awaiting road test.
I was hoping I would get completed order but I was very disappointed that the grease seals lug nuts cape arrived today but no brakes. I was giving only one tracking number and was expecting full order.
Brooke M.
5/23/2024
I am so glad you let us know about this. Our team is on it and the parts should be on their way soon if they arent already!
Brakes bolted right up on my 2001 DHM boat trailer, replacing the UFP brakes which were badly worn. The Kodiak brakes are great quality and ETrailer customer service was phenomenal. The original bearing buddies were badly worn so I installed the caps which came with the kit, but I will be ordering new bearing buddy caps soon.
They have been working as expected
they are good replacements for the price
Product was as advertised. Not impressed with koda gaurd chipping on calipers. Coating seems thin and not very durable
Product was east to install and all parts were there. Quality is good and would recommend
Great value and all-in-one solution for boat trailer brakes.
Quick delivery
Haven't installed yet. looks as expected. Shipping was great, even though I ordered an out of stock item the communication was fantastic and arrived when they said it would. The box it came in had nice handle cuts in it for handling, It was actually still square when I received it. Nice quality work by all.
Parts showed up just as represented on the site. Everything fit up and works great.
wit out operating the trailer and it will not be used until the lake has lost it's ice in late April I will not know until then. Right now the snow in the driveway keeps me from even installing the brakes.
Item is as described, good quality!
Fast delivery excellence service
Very professional and well taking care of do appreciate this awesome product
Do you have a question about this Trailer Brake?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brian
5/20/2024
These brakes have turned out well for me, as expected. They are so much more reliable and maintenance free than my old drum brakes. Make the changeover - pretty sure youll be glad you did.