bing tracking image
  1. Trailer Suspension Parts
  2. Dexter
  3. Suspension Kits
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
Dexter

Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs

Part Number: K71-403-00
In Stock
$29.94
Retail:$51.88
You Save: 42%
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Great Prices for the best trailer suspension parts from Dexter. Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs part number K71-403-00 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (72)
  • Q & A (0)
  • Videos (2)
  • Photos

Dexter Trailer Suspension Parts - K71-403-00

  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Double Eye Springs
  • Single Axle
  • Dexter


  • Single axle suspension kit for 1-3/4" wide, double eye springs
  • Kit Includes:
    • 2 Shackle links (018-012-01)
    • 2 Shackle link assemblies (018-021-00)
    • (6) 7/16"-20 Flange nuts (006-092-01)
    • 2 Shoulder bolts (007-126-00)
  • Made in the USA

Diagram showing dimensions of components

K71-403-00 Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs

Compares to A/P-122-00





Video of Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Feature Review Dexter Single Axle Heavy Duty Suspension Kit

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Dexter Single Axle Heavy Duty Suspension Kit for Double Eye Springs. Now, this single axle suspension kit is for 1 3/4-inch-wide double eye springs. These parts here will allow you to connect your double eye leaf springs to your trailer hangers, and the kit will include everything shown here on the table. It comes with the two shackle link assemblies, the two shackle links, two shoulder bolts, and then the six 7/16 by 20 size flange nuts.

These parts are made in the USA. But that should do it for the review on the Dexter Single Axle Heavy Duty Suspension Kit for Double Eye Springs.

Customer Satisfaction Score:


Customer Reviews

Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs - K71-403-00

Average Customer Rating:  4.9 out of 5 stars   (72 Customer Reviews)


by:

Seems like quality hardware. Wish the lock nuts were a little tighter.



by:

I use the trailer almost every weekend and have had no issues so far.



by:

Much heavier duty than the originals. Definitely an improvement. Helpful to use a C clamp to hold pieces in place while tightening nuts but keeping prices centered in holes.



by:

Exactly what is needed, did not have to search for individual parts.



by:

Replaced both leaf springs, hangers, and shocks on a Dexter 3500lb axle. Entire process took just over an hour.



by:

Trailer Doesn't Have broken springs anymore. Fun stuff! Good product, fit properly, no complaints.



by:

Nice ...heavy duty....upgrade from my old stuff



by:

As with the spring I bought they took some persuasion to install. My trailer perhaps. The three star is for shipping. It was a week later than the “estimated date” .



by:

One year and going strong



by:

Delivery was prompt and part fit as sho uld.



by:

The customer service was outstanding. Thru the process of identifying what I needed to ordering and delivering the products I dealt with multiple Customer Service Representatives (CSR). Everyone of them were helpful and courteous. I really appreciated the follow up after my initial contact with CSR. Once the product was ordered I was kept up to date on the status of the order thru regular emails from an etrailer CSR. The parts arrived as they promised, and a CSR even followed up with me after that. Great service, keep it up!



by:

The parts worked well. Etrailer had exactly what I needed and a great search filter as well.



by:

Other than slow shipping time, all arrived and worked as intended. shipping box had a hole in the side and the leaf springs were not packed very well, hence the hole in the box.



by:

Replaced worn out springs and hardware. Everything went better than expected. Easy repair, thanks.



by:

I will be carrying this kit along with a spare leaf spring so as I can make a complete repair on the road if necessary.



by:

This was a prompt and efficient process. Although the shipping fee is high for a small purchase, the tracking process is amazing especially the update rate. Thanks.



by:

Kit came as expected and fit well.



by:

Real good quality.

John S.

7/24/2022

Yes



by:

I would order from you again and again very professional and helpful



by:

This is exactly what I needed! Can’t hardly wait to install these!



by:

It's all high quality



by:

Perferet fit and well pleased



by:

Perfect fit. Easy to install once the old rusty one were off.



by:

Exactly as advertised worked great!



by:

I am very glad to receive my order in such speediest time. Everything I ordered was there.
Thank you


25
72
Show More Reviews

See what our Experts say about this Dexter Trailer Suspension Parts

  • Dimensions Of Shackle Bolt For Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00
    The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 uses the Shackle Bolt # 007-126-01. The 9/16" portion of this bolt is 2-1/4" long.
    view full answer...
    Image 1 for
  • How to Determine Correct Leaf Springs For 2018 Jayco Travel Trailer
    Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf springs from center-to-center of the spring eyes, and you also need to know the weight rating of your axle. Based on its weight, your 174BH is likely to have a 3,500 lb axle, though you'll want to double check just to be sure. Leaf springs...
    view full answer...
  • Mounting Hardware Needed To Install 3,500LB Axle & Double Eye Leaf Springs on a Torsion Axle Trailer
    Here is a list of suspension kits we have that contain the hangers, shackle straps and mounting bolts for the leaf springs. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS2 Single-Axle Trailer Hanger Kit 3-1/4" Front, 7/8" Rear # APS5 Single-Axle Trailer Hanger Kit 1-1/2" Front, 7/8" Rear # APS1 Here are kits for just the spring hangers. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS3 Single-Axle Trailer Hanger Kit 3-1/4" Front, 1-1/4" Rear # APS4 We...
    view full answer...
  • Replacement Leaf Spring Recommendation for 2009 Venture VAB-3025 Boat Trailer
    According to my research you should need 25-1/8" long springs rated for a 3,500 lb axle which means you'll need the following parts: - 3.5K Leaf Spring # e54SR OR Upgrade to part # e68SR - U-Bolt Kit # CE23002 for Round Axle OR # CE23103 for Square Axle - Heavy Duty Suspension Kit # K71-403-00 You'll want to verify the length of your current leaf springs by lifting your axle off the ground by the frame and measuring from center eye to center eye. If you measure something different...
    view full answer...
  • Parts Needed To Replace Slipper Spring With Double Eye Leaf Springs On a 2002 Coleman Mesa 3651
    As we will not have a slipper spring that fits your 2002 Coleman Mesa 3651 I recommend upgrading to a double eye leaf spring system. You will only need to change your Rear Hanger # 93003-3X on each side to be able to install 2 of the 4-Leaf Double-Eye Springs # e54SR. The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 will give you the necessary new hardware to mount the springs to the frame. I recommend upgrading to the Wet Bolt Kit # K71-358-00 to cut down on noise and provide...
    view full answer...
  • Shackle Suspension Kit for Single Axle Trailer With 3,500 lb Axle
    We can get you the right shackle kit for your single axle trailer with a Dexter 3,500 lb axle, and you can choose from either a standard kit or an upgrade kit. Either will work, though the Upgrade Kit is going to be the best option due to the fact it includes thicker 1/2" shackles, wet bolts with grease zerks to make lubrication super simple, along with bronze bushings for the longest lifespan. Your options are as follows: - Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers...
    view full answer...
  • Does the Dexter Single Axle Heavy Duty Suspension Kit Come with Bushings
    The Dexter Single Axle Heavy Duty Suspension Kit part # K71-403-00 does not come with bushings. These will be required but they should already be installed in the leaf springs and equalizers. If yours need replaced you can use the Suspension Bushing part # 721590.
    view full answer...
  • Is There Torque Specs For the Nuts On The Dexter Single Axle Heavy Duty Suspension Kit K71-403-00
    The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 technically will not have a torque specification. However, I have been asked this before and was informed by Dexter that what you need to do is tighten them down to the point of either pinching the leaf spring or all the way to the shoulder of the bolts. If you start pinching the head of the leaf spring before hitting the shoulder, you will need to back the nut off a little to let the spring move, but not so loose that it can...
    view full answer...
  • Will the Dexter Single Axle Heavy Duty Suspension Kit Work on a Tandem Axle Trailer
    Yes, the Dexter Single Axle Heavy Duty Suspension Kit part # K71-403-00 will work on tandem axle trailer you'll just need to purchase multiple kits. This is a standard kit that will work great for most trailers but if you're looking for an upgrade, I recommend the Dexter Heavy Duty Suspension Upgrade Kit part # K71-358-00 since it has bronze bushings which increase longevity, thicker shackles for added strength, and grease fittings for easy maintenance.
    view full answer...
  • How Thick Are the Shackle Links of Dexter Equalizer Kit # K71-403-00
    The shackle links of the # K71-403-00 are 3/8 inch thick.
    view full answer...
  • Dimensions of Bolts and Shacles of Dexter Heavy Duty Suspension kit # K71-403-00
    The threaded portion of the bolts of the # K71-403-00 are 7/16 inch but the stepped up diameter is 9/16 inch. The shackle length is 3-1/8 inch from hole center to hole center. The bolt length is 2-7/8 inches. We can't help much with the axle camber as the trailer axles are bowed and designed to flatten out with weight on them.
    view full answer...
  • Does Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 Have Zinc Plating
    All of the components of the Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 are zinc plated which is great for marine applications.
    view full answer...
  • Bolt Diameter of Dexter Single Axle Heavy Duty Suspension Kit
    The bolts in the Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 are 9/16" diameter like you need. This kit is designed for and will work with your 1-3/4" wide, double eye leaf springs. I have added a link to a video review for you to check out as well of the Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00.
    view full answer...
  • Shackle Kit Without Wet Bots For a Tandem Axle RV Camper
    You will need 2 of the Heavy Duty Suspension Kits # K71-403-00 for your tandem axle RV. If you also need to replace the equalizer bolts you will need 2 Bolts # 007-126-01 and Nuts # 006-092-01. We do have Nylon Bushings # TRBU11566 if your current bushings are worn through. If you need help finding a replacement equalizer please send me an image with dimensions so I can be sure to get you the correct shape and size.
    view full answer...
  • How to Lift a Single Axle Trailer w/ an Axle Flip Kit
    The Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs item # K71-403-00 you referenced does not add lift to your trailer. The best way to lift your trailer is to use the Dexter Trailer Springs Over-Under Conversion Kit item # K71-385-00 for 3 inch diameter axles or the Dexter Trailer Springs Over-Under Conversion Kit item # K71-384-00 for 2-3/8" diameter axles. These over and under conversion kits move your axle below your trailer's leaf springs and give you a lift equivalent...
    view full answer...
  • Replacement Suspension For A 2010 Karavan WC-2450-84 Trailer
    I can certainly point you in the right direction. From what I can see on the Karavan website, your 2010 Karavan WC-2450-84 Trailer has a GVWR of about 3000 lbs and is about 100" wide. It is of course preferred to have you as the owner confirm these specs prior to ordering. That being said, for a replacement axle we would be looking at a 3,500 lb axle like the # 7359765 which measures 95" long from hub face to hub face. If you can confirm the hub face length of the current axle, we will...
    view full answer...
  • Could Going to Double Eye Springs From Slipper Springs Improve Ride Quality of Small Trailer
    Going with a double eye spring setup in place of your slipper setup that already has shocks wouldn't give you enough of a difference to make the upgrade worth it. Unfortunately the problem is just due to the short distance between the coupler and the axle. You might check to make sure your leaf springs are the correct rating for the weight of the trailer though as that's only thing I can think of that could be off and causing it to be bouncier.
    view full answer...
    Image 1 for
  • Replacement U-Bolts and Mounting Hardware For 3,500LB Leaf Springs On Trailer
    If you are dealing with a single axle and the 4-Leaf Double-Eye Spring # e97SR I recommend either the standard Kit # K71-403-00 or Wet Bolt Kit # K71-358-00 which will give you new bolts, nuts and shackle straps. The U-Bolt Kit # CE23002 is a great upgrade to the uncoated u-bolt you currently have. If you have a tandem axle trailer you would use 2 of the U-Bolt Kits # CE23002 and one of the wet bolt kits from the list below depending on the length of your current shackle straps and if...
    view full answer...


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924