To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.
Features:
Specs:
This T-connector wiring harness uses your factory tow package to add a 7-way socket in your truck bed while also retaining the use of the 7-way at your vehicle's bumper. The harness plugs into the back of your 7-way at the bumper and also into your factory wiring. And it provides 10 feet of cord to run the second 7-way connector to your truck bed. Installing a second 7-way connector in your truck bed makes it easy to connect the 7-way plug from your fifth-wheel or gooseneck trailer.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (139 Customer Reviews)
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.Exactly what I needed. The Hopkins Endurance 5th Wheel 90-Degree Harness is truly plug 'n play. Once you decide on the truck bed location for the new 7-pole plug and drill the hole the rest is simply snap together and you're done. The new harness fit perfectly with the factory 7-pin connector and had plenty of length to allow for the new plug to be mounted conveniently in the truck bed wall. No more cable hanging out over the tailgate.
This is a great connector. I’ve purchased this before and installed it on my 2007 Ram 2500. It works great. I purchased another Ram truck a 2006 3500 and got this same connector again. The instal is simple and it provided a clean safe look to your setup.
Fits very nicely and is directly plug and play
Installed on my 2006 Dodge Ram 2500 in ten minutes. Works excellent! No more draping my wiring harness over my tailgate!
Installation went great drill hole and plug everything in comes with enough wire to put virtually anywhere in the bed. I was very pleased with the quality of the connectors.
Works well. Defiantly better than installing a gooseneck under the bed hitch. You can swap the plate over to a fifth wheel plate with ease. 2 birds one stone. Defiantly recommend
Peter
8/16/2023
Working great
Wrong one for my vehicle even though it said it was for it.
Return policy costed more to return than it was worth for a refund so I kept it and gave it away to my neighbor.
Really fast and great service. Ordered many things through them and never had any issues.
Easy plug and play installation. So far so good.
Perfect, easy install. Pu bed was wired for 5th wheel or gooseneck in l5 minutes.
Everything worked great.
Easy Install and fast Delivery. Plugged right right in.
This harness was a breeze to install. Simple unplug and plug back together, cannot be any easier. Harness was plenty long to locate the plugin anywhere you would choose. Factory style connectors worked perfect. Highly recommend this product and would absolutely buy again. Thanks etrailer for your quality products and wealth of application/installation info available!!!
Adam M.
1/26/2018
Very well just as expected.
Very easy install. Way too long of a harness for my needs.
Plugged right in thanks
Came on time perfect fit easy to install .
High quality and good instructions. The manufacturer provides plenty of cable to put the additional connector virtually anywhere.
Bruce B.
8/16/2016
Both continue to work fine!
After using this plug adapter for a year I have been very satisfied. It was very easy to install, wiring plug was an exact fit. I use it for my fifth wheel travel trailer. I have not had any problems. Great product, thanks.
Easy to install, high quality good directions !
Installed for a friend that had a camper. Plug and play other than the ground. Very straightforward and easy install. High quality product.
Paul S.
7/13/2018
Still working well. No complaints.
Finally got the right part, my bad the first time, and the Hopkins wiring harness was in my 2006 Dodge Ram truck in less than 30 minutes. Most of your time will be spent drilling the hole in the side of the bed. I used a 2" hole saw vice the 2 & 1/8th (already had the 2" and didn't want to run out and buy another hole saw) and had no problems getting the harness through the hole. Hooked up the trailer and everything worked perfectly. There's plenty of harness, maybe too much, for any application in the truck bed. Great product!
The wiring harness for my gooseneck 7 pole hitch on my Dodge is as advertised. The only problem is I looked under my truck it is not wired with a stock connector. I will have to cut and splice it anyway. Not a problem with the product but with my wiring.
I originally had ordered a different product but it was back ordered a month which I was ok with. After I placed the order, I received an email stating they had another conector that was basically identical that was in stock and if I wanted to switch to that one, I could call in and switch. So, I called in and they changed my order to that in-stock plug and it was here within a week! Awesome and easy customer service. It was also really easy to truck.
As for installation, it went flawless and I was done in under an hour. Hooked it up to one of my trailers and everything works perfect (including trailer brakes). Very happy with the whole purchasing/installing experience!
Trailer plug can't come unplugged or drag the ground anymore with connection inside of bed.
Brian
4/1/2018
Still works great
Super easy install. Only needed about half the length of the wiring harness it comes with. Forget looking all over for a 2 1/8" hole saw. A 2" will do the trick. (The trailer video says 1 1/8", but that needs to be corrected). This harness is well worth the money.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve M.
8/23/2014
I have used the Hopkins Endurance 90-degree harness monthly over past year since installation. I have also used the factory bumper 7-pole plug as my towing needs required. Both connectors work every time indicating a solid fit and good contact between the factory 7-pin connector and the added Hopkins Endurance connector. Very pleased with both ease of installation and performance.