See what our Experts say about this Flint Hill Goods Trailer Hitch Ball Mount

• Whats the Longest Sleeve Style Trailer Coupler for 2-51/6 Hitch Balls
  The Sleeve-Lock Trailer Coupler part # CTA-296 which is designed to be used with something like the Ram 3-Position Adjustable Channel Bracket part # CTA-CB4 measures 9-7/8" from the center of the mounting holes to the tip of the coupler. That said, the longer the trailer coupler is, the more your weight capacity will be reduced so most trailer coupler manufactures don't really list the coupler lengths. If you need to extend the connection between the vehicle and trailer I simply recommend...
  view full answer...
• Adjustable Ball Mount 6 inch Rise that Fits 2019 Ford Escape with Draw Tite Hitch
  The Flint Hill Goods adjustable ball mount part # FHG92VR would have clearance to work with your Draw Tite hitch # 75758 on you 2019 Ford Escape and would give you the 6 inches of rise you are looking for as well.
  view full answer...
• Does Flint Hill Goods Adjustable Tri-Ball Mount Come With Lock
  A hitch pin and clip IS included, but a lock is not included with the Flint Hill Goods Adjustable Tri-Ball Mount # FHG92VR. Adding a lock is a great idea as it'll keep the ball mount safe and secure in your 2" hitch, and for that what you can use is the Hitch Receiver Lock # e98881.
  view full answer...
• Does the etrailer Adjustable 2-Ball Mount e66PR Have a 1-7/8" Ball Attachment?
  No, I am sorry it does not. The etrailer Adjustable 2-Ball Mount item # e66PR only has the 2" and 2-5/16" dual hitch ball attachment. This is a brand new product as of 6/4/2024 and there are no additional attachments for it. The Flint Hill Goods Adj Tri-Ball Mount item # FHG92VR is our closest comparable option that also includes a 1-7/8" hitch ball.
  view full answer...
• Availability Of 1-7/8" Ball For etrailer Adjustable 2-Ball Mount e66PR
  Hello Thomas, thanks for reaching out. I checked with our product development team, and at this time there are no immediate plans to make a 1-7/8" ball for the etrailer Adjustable 2-Ball Mount # e66PR. The idea has been floated around a few times but never really gained any traction. Personally, I would like to see one since it would make our ball mount much more versatile, but it sounds like it may be quite a while until that happens. If you are looking for an adjustable ball mount with...
  view full answer...
• Availability of 1-7/8" Ball for etrailer Adjustable 2-Ball Mount
  Hi Tyler; this is something that has been frequently requested but, it sounds like our product development team doesn't have any plans to make one in the near future. The only thing I can offer at this time is an alternative ball mount. The # TS74VR has a similar design and, although it is a "Tri-Ball," only holds two at a time. You can set it up with the 2" and 1-7/8" with the option to add the 2-5/16" should you ever need it. A more budget friendly option would be the Flint Hill Goods...
  view full answer...
• Recommended Ball Mount for U-Haul 5x8 Cargo Trailer
  The U-Haul 5x8 Cargo Trailer has a suggested coupler height of 18". Therefore, you'll want to take this measurement and subtract this from the distance from the ground to the top inside edge of the receiver on the vehicle. The difference between these measurements will be the rise/drop you need to look for in a ball mount. I recommend adjustable since you can use it on multiple trailers, the Flint Hill Goods Adj Tri-Ball Mount part # FHG92VR is a good option which can be adjusted to a 5-3/4"...
  view full answer...
• Recommended Replacement Tri Ball Mount for a Locame Ball Mount
  Hey Charles, we actually don't have any Locame parts because we don't carry that brand. We do have similar adjustable ball mounts like the Flint Hill Goods Adj Tri-Ball Mount # FHG92VR which includes a tri-ball mount, fits in a 2" hitch, and has 5 3/4" of rise/drop.
  view full answer...
• Ball Mount For 2 Inch Hitch For U-Haul Trailer
  For a ball mount that will give you the proper rise or drop use the Flint Hill Goods Adjustable Tri-Ball Mount # FHG92VR. U-Haul trailers have a standard coupler height of 18 inches so this adjustable ball mount will allow you to tow level; it also has a 2" hitch ball that is needed for the U-Haul trailers. The # FHG92VR even comes with a pin and clip so you don't need to buy anything else.
  view full answer...
• Can etrailer Ball Mount w/ Pre-Torqued 2" Ball be Used in the Rise Position
  Hey Kevin, great question! You definitely can invert the etrailer Ball Mount w/ Pre-Torqued 2" Ball # e87DR so it's in a rise configuration, but you will need to remove and re-install the hitch ball so it's in the correct orientation. If you'd rather not have to torque the hitch ball then I recommend checking out an adjustable hitch system like the Flint Hill Goods Adj Tri-Ball Mount # FHG92VR which gives you the ability to use the ball mount in the drop or rise configuration by removing...
  view full answer...
• Is Shank of Flint Hill Goods part # FHG92VR a Standard Weight Distribution Shank
  Hey Philip, the Flint Hill Goods part # FHG92VR that you referenced does use a standard weight distribution shank like you asked about so if you wanted to swap the hitch opening attachment to a different shank you certainly could.
  view full answer...
• Trailer Hitch Ball Kit Recommendation for 4-1/2" Rise and 2" Hitch Ball Size
  Hey Kenneth, thanks for reaching out! My top choice for you is the B&W Tow & Stow 3-Ball Mount # BWTS10048B because it's a proven ball mount with a lot of versatility built in so you won't need to purchase a ball mount for a really long time. If you're wanting something more cost-effective, then the Flint Hill Goods Adj Tri-Ball Mount # FHG92VR is going to be more your style. It doesn't look as clean or adjust as smoothly as the Tow & Stow, but it will still get the job done. Attached...
  view full answer...