bing tracking image
  1. Trailer Axles
  2. etrailer
  3. 5200 lbs
  4. 86-1/2 Inch Long
  5. Spindles Only
  6. No Drop or Lift
Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs

Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs

Item # e45GR
Our Price: $211.50
Trailer Axles
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Round trailer axle beam measures 86-1/2" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 71-1/2" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from etrailer. Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs part number e45GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (181)
  • Q & A (0)
  • Photos

etrailer Trailer Axles - e45GR

  • 5200 lbs
  • 86-1/2 Inch Long
  • Spindles Only
  • No Drop or Lift
  • 71-1/2 Inch Long
  • Leaf Spring Suspension
  • No Hubs
  • etrailer
  • Easy Lube Spindles

Round trailer axle beam measures 86-1/2" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 71-1/2" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, Easy Grease spindles - no drop
    • Patented welding process prevents spindle failure with 40% stronger welds
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • CSA, QAI, and SAE-N certified
  • Lifetime technical support from the experts at etrailer.com
  • Made in the USA


Specs:

  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 86-1/2"
  • Spring-center-to-spring-center length: 71-1/2"
  • Axle diameter: 3"
  • Spindle/hub compatibility:
    • Bearings: 25580 inner, 15123 outer
    • Seal: GS2250-DL (inner diameter 2.25")
  • Limited lifetime warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


etrailer Axles

etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



e45GR etrailer by AxleTek Replacement Axle Beam - Easy Grease - 86.5" Hub Face - 71.5" Spring Center - 5,200 lbs





Customer Satisfaction Score:


Customer Reviews

Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs - e45GR

Average Customer Rating:  4.7 out of 5 stars   (181 Customer Reviews)

Round trailer axle beam measures 86-1/2" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 71-1/2" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

by:

No issues with the bearings



by:

Exactly as described. I had to relocate the exit holes for the brake wires as they were too close to springs.



by:

Fast and easy with good pricing



by:



by:



by:

The axles that I ordered last year are still working out great. But even better than the parts was the service I got from etrailer. It was so great working with a company who took the time to listen to my project and help me get the right parts I needed, especially coming right off the heels of a terrible experience dealing with bad information and wrong parts from a competitor. Even with some damages in shipping, the returns/ and replacements were no hassle, with most issues being quickly resolved and not even costing me any additional downtime. As a contractor keeping a small fleet rolling, your competency and professionalism have made me a customer for life!! You guys at etrailer will be my first stop for trailer parts.



by: 11/30/2023

Welds looked good however the assembler failed to rotationally align the weld on spindle/brake mounts properly. One was about 3 degrees off and the other side was an 9.5 degrees from the 12 oclock position. Not sure about the thickness of the tube. Kind of strange to look at when the top of the brake system is not at 12 oclock. Found this after I removed the spring pads on this 2.1 degree camber axle so I had to jig the tube to fine zero toe to locate the new pads as the 2.1 camber tube changes wheel alignment depending on the bend/ springpad relationship. Not sure the AVG JOE is going to be able to move the spring pads when the brake mounts can't be used as a reliable ref point. If the toe is off from improper pad rotational location. the trailer will eat tires at best or worse cause a loss of controlled tracking and someone could get get killed.



by:

Replaced the old axles with these on my 7x16’ equipment trailer, been nothing but amazing since I’ve installed them. Hauled thousands of pounds since and with minor greasing and normal maintenance they’ve been great.



by:

So far performing well. Have not been able to use trailer yet as much as I wanted to, don't use the grease nipples. Its easy to regrease without.



by:

Everything is working perfect with that replacement axle. I have definitely put it to the test a lot of miles with a lot of weight. Very highly recommended.



by:

The box carrying the axle was empty. You might want to protect the ends of the tube better so it doesn’t fall out during delivery.



by:

I haven’t installed the axle yet, but it looks to be pretty solid. Time will tell. Irrelevant to the axle, but I have to touch up some paint where UPS dropped it down on my concrete. Not a big deal though. It’s going to get beat up by road debris anyway.



by:

Very easy installation. Everything fit perfect.



by:

It worked out great. I am ordering another today.



by:

Always hair free when I buy from ev tra iler



by:

PaulaT was excellent in helping resolve a wrong axle issue. I ordered one too short, but she was able to fix me up.



by:

Received. Cannot use till all parts come



by:

Axle arrived fast, was exactly what I ordered and needed. Install went well with no problems.



by:

This is a high-quality, reasonably priced axle. It was delivered quickly to my home and installed easily.



by:

The mounts were 1/2 inch closer than advertised. I was able to persuade the springs inward to compensate. Good price and fast shipping.



by:

Fast shipping and fit perfectly!
Thank
you!



by:

Worked great on my trailer.
It is a older
trailer and I needed to move the anchor points on the axel but that was not difficult to have done.
Axel works great.
I love the easy grease feature.



by:

All good ,very well made Axl



by:

The axle was exactly what I ordered and showed up much quicker than I expected. I installed it in about an hour. Good quality. Having the wire for the brakes already ran inside the axle made it very easy to rewrite the brakes, nice feature.



by:

Perfect fit shipped in great shape. No problems at all after a year running.


25
179
Show More Reviews

See what our Experts say about this etrailer Trailer Axles

  • Solution for Custom Axle Replacement on REMEQ Boat Trailer
    I do have a solution for a replacement, but we do not create custom axles here at etrailer. For your REMEQ boat trailer I recommend using the Timbren Axle-Less Trailer Suspension System. This system fits any frame width so you would not have to worry about the axle length for a replacement. Assuming you need a 5,200 lb axle like the # e45GR you were looking at, we have the # TASR5200S05. We have other options as well like the # ASR3500S05 for replacing a 3,500 lb axle or the # ASR2KHDS01...
    view full answer...
  • Replacement Axle for My Sail Boat Trailer
    We do have the Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs # e38GR available as a lighter replacement axle for your sail boat trailer. The # e38GR has a weight capacity of 3500 lbs while the # e45GR has a weight capacity of 5200 lbs. The one other difference is the # e38GR is 2 1/2" longer than the # e45GR. There are no 5 bolt idler hubs to work with the # e45GR.
    view full answer...
  • Availability Of An Overslung 86.5" Hub Face Axle Beam
    Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam # e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not able to weld on spring seats for you here, but we can sell you a few loose spring seats # TRSS300. You would just have to have them welded to the top of the axle tube in your desired location. This axle is also available in a 5,200 lb capacity # e45GR if that...
    view full answer...
  • Which Idler Hubs Will Work the Trailer Axle Beam # e45GR
    Depending on the size of your wheel and the bolt pattern we do have some different options for an idler hub for the Trailer Axle Beam # e45GR. If your wheel size is 14" - 16 1/2" and the bolt pattern is 6 on 5 1/2", you can use an idler hub like the Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2" # 8-213-5UC1. If your wheels are 16" - 17 1/2" and the bolt pattern is 8 on 6 1/2", you can use an idler hub like the Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and...
    view full answer...
  • What are Grease Seal Dimensions for etrailer Axle # e45GR
    You are correct the seal dimensions the trailer axle # e45GR uses are 2.25 inch by 3.375 inch and for a replacement would be # RG06-070.
    view full answer...
  • Is There a Hub Conversion Kit for Mobile Home Trailer Axles
    I may have an option for you but mobile home axles are considered a one-time use only product and are not designed to be used on a standard trailer. Therefore, there are no hub conversion kits for them that will allow you to use standard wheels/tires. The only option we can offer you for this is a completely new axle. I have attached some information before this. In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight...
    view full answer...
  • Replacement Axles, Leaf Springs, and Equalizers for 2010 Keystone Cougar 26BHSWE
    From what I have found, you have 4,400 lb axles on your 2010 Keystone Cougar 26BHSWE. Your axles have a hub face measurement of 85" and a 68-1/2" spring center. Unfortunately, 4,400 lb axles are no longer being made so you will also be replacing the hubs and drums. When choosing a replacement axle you typically want to match the hub face measurement. You will also need a higher capacity axle (5,200 lb) since moving down in capacity wouldn't be enough for your 7,800 lb GVWR. I recommend...
    view full answer...
    Image 1 for
  • Disc Brake Kit for e45GR 3,500 lbs Axle
    Yes, we do sell a disc brake kit for the Item # e45GR axle it is the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 item # K2HR35D. This disc brake kit fits the 5 bolt flange and is rated for 3,500 lbs. It is Dacromet-plated which makes it corrosion resistant. I have linked an installation video below. Yes we do sell the item # e45GR axle.
    view full answer...
  • Replacement Dexter D52 Trailer Axle with 86.5" Hub Face Length
    It sounds like you're looking for the Dexter Trailer Axle Beam part # 8327816 which is 86.5" long at the hub face and has a 5,200 lb weight capacity. The spring seats however will need to be moved in for your application which requires tack welding so bear this in mind, you'll likely want part # TRSS300 to go with as removing the old ones cleanly is difficult. If you're looking to save some cash we do have this same axle through our in-house brand as part # e45GR.
    view full answer...
  • Replacement Axle for 2018 Grand Design Imagine 2150RB
    Grand Design lists an 86-1/2" 3,500 lb axle for your Imagine 2150RB. The next size up would be a 5,200 lb axle like the # e45GR. This has the same 86-1/2" hub face measurement but the spring seat is different. You will need to cut off the spring seats and weld on # TRSS300 to match your current 68-1/2" measurement. The CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles # CE23003 will be required as well. For a hub and drum assembly you can use the # AKHD-655-6-EZ-K. These...
    view full answer...
  • Solution for Replacement Hub and Drum for Dexter 008-480-05
    The Dexter 008-480-05 is specifically designed to fit AL-KO axles. Unfortunately, the # 8-407-5UC3-EZ will not fit AL-KO axles. Since these axles are no longer made replacement parts are not available. The best solution is to replace your 4,400 lb axle with a conventional axle. The closest thing in capacity will be a 5,200 lb axle like the # e45GR which measures 86-1/2" long. You will need your hub face to hub face measurement to find the correct replacement. If the spring seat measurement...
    view full answer...
    Image 1 for
  • Recommended Axle To Replace 86-1/2" Long Dexter Mobile Home Axle
    I reached out to my contact at Dexter and based on the part number you provided you have an older mobile home axle that has an 86-1/2" hub face to hub face measurement, and 75-1/2" spring center to spring center measurement. They were unable to find the exact weight rating of the axle. Based on the hub face length you need for a replacement we have the Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long # e45GR which has a 5200lb axle rating which would be a great choice. The spring...
    view full answer...
  • Replacement Axle Options For 86-1/2 Hub Face With 67-1/2 Spring Center & 5 on 4-1/2 Bolt Pattern
    The only axle we have that will allow for your same measurements with a 5 on 4-1/2" bolt pattern in the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS02. This will pair with 2 of the Dexter Trailer Idler Hubs # 84545UC1-EZ to give you the same bolt pattern. The Timbren has its own built in suspension so you will need to remove your current leaf springs. The assembly bolts to the side of your frame rails and has a weight capacity of 2,000lbs. Our smallest solid tube Axle #...
    view full answer...
  • Can New Spring Seats Be Welded Onto The Top Of An Trailer Axle Beam
    Yes, you'd just need to reach out to a qualified welder and have them weld on spring seats like part # TRSS300 to the top side of the Trailer Axle Beam with Easy Grease Spindles # e45GR. It's super common to do for people who have an underslung setup and want to raise the height of the trailer. When you remove the old axle you'll also want to replace the u-bolts with ones like part # CE23003 since they get stretched when torqued down and shouldn't be reused.
    view full answer...
    Image 1 for Image 2 for
  • Replacing 4,400 lb Axles with 5,200 lb Axles on 2013 Heartland Travel Trailer
    For a replacement 5,200 lb axle we have the following options for you: - Standard Trailer Axle Beam # e45GR - Timbren Axle-Less Trailer Suspension # ASR5200S01 The Timbren system gives you a better suspension and bolts onto your trailer frame while that standard axle would require you to have a welder cut off and then weld on new spring seats to match your trailer frame width. I'm attaching some review videos for you to check out!
    view full answer...
  • Recommended 5200lb Axle With 86-1/2" Hub Face Measurement For 2013 Keystone Cougar 325SRX TH
    I do have an option for your 2013 Keystone Cougar 325SRX TH. We have the Trailer Axle Beam with Easy Grease Spindles # e45GR which has the 5200lb rating you need, along with the 86-1/2" hub face measurement you are needing, and then a local welder can remove the current spring seats that are 71-1/2" apart and move them to 68-1/2" apart. This axle uses the standard 5200lb bearing combination so if your current brakes and hub and drum assemblies are in good shape they can be reused or you...
    view full answer...
  • Replacement Axle for 4,400 Pound Axle on 2019 Dutchmen Aspen Trail 3210BHDS
    What you have is an 85" long axle with a 4,400 lb capacity. Since 4,400 lb axles are no longer being produced, you will need an axle with a higher capacity for a replacement. There are also no 4,400 lb spindles available. For a replacement I recommend the Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs # e45GR. This axle is 86-1/2" long so it will stick out an additional 3/4" on each side but that won't be a problem. The spring seat measurement is also different....
    view full answer...
  • Replacement Option for 5,200 lb Dexter Axle on 2016 Arctic Fox 25R
    We don't have an exact match for all of your measurements but you can use the Dexter Trailer Axle Beam # 8327816 as a replacement. This is 86-1/2" long so it will stick out 1/4" more on either side of your trailer, something you won't even notice. The spring center is also different but that is fairly common when replacing an axle. What you can do is cut off the spring seats and weld on # TRSS300 to match your existing 67-1/24" measurement. Also, unless you're dead set on a Dexter axle...
    view full answer...
  • Replacement Idler Hub for 5200 lb Axle
    Unfortunately, we don't offer an idler hub with a 5 on 5-1/2 inch bolt pattern that's compatible. Given the ID of the bearings you provided, you have a 5200 lb axle. If you can switch to a hub with a 6 on 5-1/2 inch bolt pattern, the # 8-213-5UC1 would be compatible if the surface of the spindle where the grease seal rides is 2.125 inches in diameter. The hub includes the 25580 inner and LM67048 outer bearings, the corresponding races, the grease seal, dust cap and the lug nuts.
    view full answer...
  • Can the Spindle Ends Be Replaced on an LCI52-SB-86.5-68.5 Axle
    I do have an option for you but the spindle ends are not really designed to be replaced on most trailer axles. That said, we do actually offer the correct axle for your trailer in the Trailer Axle Beam with Easy Grease Spindles part # e45GR which is mostly a direct bolt-on swap so you can use your old parts such as the braking assemblies and hubs/drums. If you need replacement hubs/drums or braking assemblies however, they can be had using the Easy Grease Trailer Hub and Drum Assembly part...
    view full answer...
    Image 1 for Image 2 for
  • 86 Inch Axle With Hub and Electric Brakes For Enclosed Trailer
    The closest we have to that is an 86-1/2 inch hub-face to hub-face axle with springs seats that are 71-1/2 inches center to center. So what you would need to do is get new springs seats and have them welded on the axle at the correct length. You also need to make sure the axle is properly rated for your enclosed trailer; the two axle capacities we offer that are 86-1/2 inches long are 5,200 lb and 6,000 lb capacity. For the axles, spring seats, hubs, and brakes you can use the following: -...
    view full answer...
  • Replacement for 4,400 lb Axle on 2018 Jayco White Hawk
    What you have is an 86" long axle with a 4,400 lb capacity. Since 4,400 lb axles are no longer being produced, you will need an axle with a higher capacity for a replacement. I recommend the Trailer Axle Beam with Easy Grease Spindles # e45GR. This axle is 86-1/2" long so it will stick out an additional 1/4" on each side but that won't be a problem. The spring seat measurement is also different. This means you will need to cut off the spring seats and weld on # TRSS300 to match your current...
    view full answer...

Do you have a question about this Trailer Axle?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video by:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Kristina F
Updated by:
Kristina F
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Conner L
Installed by:
Conner L
Employee Michael B
Installed by:
Michael B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924