etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2-3/4" Rise - 7,500 lbs

See what our Experts say about this etrailer Trailer Hitch Ball Mount

• How To Determine How Much Rise Or Drop I Need For A Ball Mount?
  Hey Darrell, thanks for reaching out. The amount of rise or drop for the ball mount will depend on two things. The height of the hitch on your truck, and the height of the coupler on your trailer. We want the trailer to be level when you are towing, or as close to level as possible. What you can do is park your truck on level ground, and measure from the upper inside edge of your hitch receiver to the ground. Then you can, with the trailer leveled, measure from the center of the ball...
  view full answer...
• Best List of Towing Parts for a 2024 Hyundai Palisade
  Hey Gary, The only thing missing from your list is a ball mount, or a weight distribution system if your trailer ends up being at least half the weight of your 2024 Hyundai Palisade. Here are the parts I recommend for your setup: - Curt Trailer Hitch Receiver # C13427 - Curt T-Connector # C43FV - Universal Installation Kit # ETBC7 - No-Drill Mount Bracket # 18136 - Redarc Tow-Pro Liberty Brake Controller # RED52VR - etrailer Ball Mount # e38NR OR etrailer Adjustable 2-Ball Mount...
  view full answer...
• Can Cargo Box and Bike Rack Fit on a Malone LowBed MicroSport Trailer
  Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit # e38NR. This gives you a 2-3/4" rise but that will still work for your application. The Malone LowBed MicroSport Trailer # MAL25FR can accommodate the Malone Pilot Trailer Bike Rack # MPG2100, but while the Storage Trunk # MPG481 will physically be able to fit inside the frame of your trailer, I don't believe you'll be able to...
  view full answer...
• Recommended Hitch and Wiring Harness for 2024 Honda Odyssey EX-L
  For a hitch that fits your 2024 Honda Odyssey EX-L I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76170. The main reason I would choose this hitch over other options is the concealed crosstube. Not only does this improve clearance, it also gives the hitch a much cleaner look. The only hitch I think is better is the Hidden Hitch by Draw-Tite # DT76GR, but that comes at a greater cost. This hitch has a completely removable receiver so you have no clearance lost and a factory...
  view full answer...
• Is OEM or Aftermarket Hitch Better Quality for a 2011 Honda CR-V
  Hey Judy, thanks for reaching out! The quality of OEM vs aftermarket hitches is usually pretty comparable. The pricing on what you're looking at seems to be okay, but what you're likely going to see is a pretty big price tag on the labor involved in the installation - that's how they really get you. An aftermarket hitch like the etrailer Trailer Hitch Receiver # e39AR will save you a little on the hitch side of things, which you can then turn around and give to a local trusted shop to...
  view full answer...
• 2011 Toyota Prius Trailer Hitch, Wiring, and Ball Mount Recommendations for Towing a Sailboat
  Hey James, thanks for reaching out - I'd be more than happy to help you find the best parts for your 2011 Toyota Prius! I currently own a 2009 Prius so definitely get where you're coming from, and there are 2 main things you'll want to consider when choosing a hitch; ground clearance, and strength. The best hitch to address both of these concerns is the EcoHitch Hidden Trailer Hitch Receiver # 306-X7178 because it has a stronger tongue weight rating than the other options, and it has a...
  view full answer...
• Correct Curt Trailer Wiring Parts for a 2022 Mazda CX-5
  The Curt Upgraded Circuit Protected Powered Tail Light Converter # C56496 along with the Powered Converter Wiring Kit # 55151 are what you need to add wiring to your 2022 Mazda CX-5. Sometimes our fit system needs adjustments made and this is one of those times. You're good to go with these parts! If you're looking for a complete towing setup then I also recommend checking out the etrailer Hitch # e98902 because of the durable matte black powder coat and then the ball mount kit # e38NR...
  view full answer...
• 2018 Nissan Murano Recommended Parts for Towing a Small Trailer
  I have the exact parts you need for towing a small trailer with your 2018 Nissan Murano! We don't have the wiring paired with the hitches but I can let you know what wiring to use. Here are the parts I recommend for you: - etrailer Trailer Hitch Receiver # e98907 - Curt T-Connector Vehicle Wiring Harness # C56267 - Mounting Brackets # 18140 and # 18144 - Ball Mount Kit # e38NR The etrailer hitch has a matte black finish that does a great job at blending in with any black trim, and...
  view full answer...
• Will Curt Trailer Hitch Receiver Fit a 2023 Toyota RAV4 Hybrid Woodland Edition
  Yes, the Curt Trailer Hitch Receiver # C13416 will fit and work great with your 2023 Toyota RAV4 Hybrid Woodland Edition! If you were planning on using this for towing a trailer then you'll also need the Curt T-Connector Wiring # C56434, the mounting brackets # 18144 and # C57202, and a ball mount like what comes in our Ball Mount Kit # e38NR. Attached are some review and installation videos for you to check out, as well as a helpful article showing how to choose the correct ball mount...
  view full answer...
• Recommended Trailer Hitch and Wiring for 2008 Jeep Wrangler X
  The hitch and wiring I recommend for your 2008 Jeep Wrangler X are the etrailer Trailer Hitch # e98856 and the Tekonsha T-One Wiring Kit # 118416. This trailer hitch has a matte black finish that looks more rugged and protects the hitch better than the classic glossy finish that the other hitches have to offer. This also has a longer receiver tube which helps to place accessories further back past your spare tire. The T-One wiring is simply the best and most reliable that we have to offer...
  view full answer...
  
• Will The Curt Trailer Hitch Receiver # C13397 Fit a 2025 Honda CR-V Hybrid Sport-L?
  Yes, the Curt Trailer Hitch Receiver # C13397 is confirmed to fit your 2025 Honda CR-V Hybrid. I recommend installing the 4-Way # 118741 when you install the receiver. This will allow to use Auxiliary Lights # C53201 or tow a trailer with a Ball Mount # e38NR.
  view full answer...
• Trailer Hitch and Wiring Fitment for Towing with a 2023 Toyota RAV4 Prime
  For your application I recommend checking out the etrailer Trailer Hitch # e23ZR along with the Curt Wiring # C56434 and mounting brackets # 18144 and # C57202 so the 4-Way can sit next to the receiver. It doesn't look like anything has been confirmed to fit the 2023 Toyota RAV4 Prime model year yet (as of January 2023) but it also doesn't look like there was really any change that would keep the 2022 fits from also fitting a 2023 so you should be good to go! I also recommend checking...
  view full answer...
• How to Choose Correct Ball Mount Rise/Drop for a 2022 Nissan Rogue with etrailer Hitch Receiver
  Thanks for reaching out and your purchase of the etrailer Trailer Hitch Receiver # e93ZR for your 2022 Nissan Rogue! To choose the correct ball mount you'll need to figure out the difference between the height of your hitch receiver and your trailer coupler. To measure your hitch receiver height you'll measure from the ground to the top inside of your receiver. When we installed this on a 2021 Rogue we found this height to be 11-3/4". Then for your trailer coupler height you'll need to...
  view full answer...
• Is Curt Class III Trailer Hitch a Good Option for Towing a Tear Drop Trailer with a 2016 Acura RDX
  The Curt Trailer Hitch # C13130 is an excellent option for towing a tear drop trailer behind your 2016 Acura RDX! This features a hidden crosstube so it looks very slick, and the 600 lbs tongue/4,000 lbs towing weight capacities are well over the 150 lb tongue/1,500 lbs towing capacities of your RDX (according to your owner's manual). To complete your towing setup you also need wiring and a ball mount kit. When I looked up the online owner's manual it stated that trailer brakes and a brake...
  view full answer...
• Will etrailer Trailer Hitch Installation be Different on a 2021 Hyundai Santa Fe Hybrid
  The installation of the Curt Trailer Hitch Receiver # C37RV on a 2021 Hyundai Santa Fe will be the same whether it's a hybrid or not. We actually did our installation video on a 2021 Santa Fe Hybrid that I'm linking for you to check out. When we mention some trimming may be required that has to do with how far down the rear bumper fascia sits. Some models may sit slightly lower but in our video on a 2021 Hybrid we didn't have to cut the fascia so odds are you're good to go! If you were...
  view full answer...
  
• 2023 Subaru Outback Wagon Towing Kit Recommendation for a U-Haul Trailer
  Hey Scott, thanks for reaching out to us - I'd be more than happy to help you out! According to the online manual for your 2023 Subaru Outback Wagon, your vehicle can tow up to a 3,500 lb trailer as long as it has brakes - which means you need to go with the 6x12 trailer from U-Haul since it's the only one that comes with surge brakes on it. To tow this trailer you'll need a hitch, wiring, and a ball mount. Here are the parts I recommend for that: - etrailer Trailer Hitch Receiver #...
  view full answer...
• Recommended Parts for Trailer Towing with a 2024 Lexus RX 350
  Hey Neil, thanks for reaching out to us! The Curt Trailer Hitch Receiver # C29VV is definitely the hitch I recommend for your 2024 Lexus RX 350 for a few reasons; currently it's the only one available for your vehicle, but even if that wasn't the case, it being a Class III hitch with a 2" receiver means you'll have a much wider variety of options to choose from when it comes to accessories than if you have a Class II hitch. This also features a hidden crosstube so it will look pretty sleek...
  view full answer...
• Recommended Hitch and Wiring for 2025 Toyota Sienna
  Hi Greg; we do carry a hitch and wiring for your 2025 Sienna. The best hitch is the etrailer # e56RR. This has a 2" receiver, bolt-on installation, and a matte black powder coat finish. It also comes with a limited lifetime warranty. For wiring you can use the Curt T-Connector Vehicle Wiring Harness # C53VV which has a plug and play installation. You will also need a ball mount like the # e38NR to complete your setup.
  view full answer...
  
• 2022 Acura MDX Trailer Hitch Recommendation
  I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver # DT42MR for your 2022 Acura MDX Type S (this hitch fits all models). We don't have any notes about this interfering with your foot sensor but it isn't uncommon for people to have to kick to either side of the hitch receiver as opposed to swiping your foot under the bumper. To wrap up your towing setup you need the Wiring # C59236 and a ball mount kit like the part # e38NR. Attached are some videos for you to check out.
  view full answer...
  
• What Hitch Ball Size For 2023 Lance 1475 Travel Trailer
  Hey Mike, The hitch ball size should match the trailer's coupler, and per Lance, your 2023 Lance 1475 travel trailer uses a 2" hitch ball. So you'll just want to match the diameter of the hitch ball's shank to that of your ball mount. For example, if your ball mount has a 1-1/4" diameter hitch ball hole you could use the 2" Hitch Ball # CB26C, or if it has a 1" diameter hole you could use the 2" Hitch Ball # SC23-C. You could also use a ball mount that has a 2" ball already installed,...
  view full answer...
• Best Hitch for Towing a Trailer with a 2024 Ford Explorer
  Hey Fischer, The best trailer hitch for your 2024 Ford Explorer is the etrailer # e29YR because it has a hidden crosstube and a matte black finish. This means you'll be getting a sleek looking hitch that also does a better job at hiding scratches than the hitches with a standard glossy finish. To wrap up your towing setup I recommend picking up the T-One Wiring # 118599 and the etrailer Ball Mount Kit # e38NR. Whenever Tekonsha wiring is available I always recommend going that route as...
  view full answer...
• 2024 Toyota RAV4 Part Recommendations for Towing a Lightweight Trailer
  Hey Dan, thanks for reaching out! Here are the parts I recommend using for towing a lightweight trailer with your 2024 Toyota RAV4: - etrailer Trailer Hitch Receiver # e23ZR - Curt T-Connector Vehicle Wiring Harness # C56434 - Mounting Brackets # 18144 and # C83DR - etrailer Pre-Torq Ball Mount for 2" Hitch # e38NR I really like the etrailer hitch receiver because it has a hidden crosstube and is the only one with the matte black finish, which not only looks better but is more durable...
  view full answer...
• Recommended Parts for Towing a U-Haul Trailer with a 2024 Toyota RAV4 Hybrid
  Hey Katie, thanks for reaching out! Here are the parts I recommend installing on your 2024 Toyota RAV4 Hybrid so you can tow the 4' x 8' U-Haul trailer: - etrailer Trailer Hitch Receiver # e23ZR - T-One Vehicle Wiring Harness # 118801 - Mounting brackets # 18144 and # 18136 - etrailer Ball Mount w/ Pre-Torqed 2" Ball # e38NR Attached are some videos for you to check out.
  view full answer...
• Affordable Ball Mount Recommendation for Towing with a 2019 Hyundai Kona
  Hey Paul, I recommend using the etrailer Ball Mount w/ Pre-Torqued 2" Ball # e38NR to tow with your 2019 Hyundai Kona because it has a 2-3/4" rise which should help get you in the level range for most trailers. I'm also attaching a helpful article about choosing the correct ball mount height to make sure you get the correct one for your application.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?