Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number E-911. This is the Curt six-inch Combo Bar with an inch and a quarter trailer hitch receiver. This is a hitch fabrication part so it's designed to be welded on to your particular application. It's going to have a nice forged collar design. Steel construction with a nice raw finish so it can easily be welded on to your application. It's going to require less prep work.
That's why they do the raw finish. This right here is going to be your half inch pinhole that goes all the way through. Now if you need a pin and clip that's going to match this receiver you can find that here at our website using part number PC2. I'll take a measurement of the width here at the back. Outside edge to outside edge is going to be one and five-eighths of an inch. We do that up front, measuring from edge-to-edge on that collar that's going to be about two and one-eighth of an inch.
A few other measurements to go over real quick, taking the measurement from the center of the pinhole to the back of the receiver, that's going to give us a measurement of about 4 inches. From the center of the hinge pinhole to the opening of the receiver, that's going to give us a measurement of about two inches. Then the overall length from front-to-back is going to be about six inches. That's going to do it for today's review of part number E-911. This is the Curt six-inch Combo Bar with and inch and a quarter trailer hitch receiver. .
Average Customer Rating: 4.9 out of 5 stars (78 Customer Reviews)
Nice raw steel item. Made a hidden hitch for my smart car. You can buy them for $400 or more. I have about $50 in mine and it's removable for when you don't need it.
Worked great! I made a trailer hitch with this for my Honda Acty van and I use it all the time.
High quality part. I ended up making a John Deere Gator hitch out of it. I especially like the Bullnose radiused edge around the opening. Smooth to the touch and easy on the Shinbone! This part is highly recommended.
Welded this to a existing hitch on my Mule 610, simple job to allow me to use ball mounts that are laying around the garage and no longer used on vehicles. Nice clean steel to weld, little or no prep work.
Harv
6/23/2015
Great does what it is supposed to do!
Great for for what I needed. I attached this item to the winch bumper on the front of my Tracker so I can manuver trailers easily. This worked like a charm
Mike K.
5/26/2016
Still working great. I welded the product on the winch mount bumper. on the front of my Chevy Tracker to move trailers in tight situations.
cudo's to etrailer.com, I was on your web site and I called for help to find what I needed and your customer service was outstanding. I ordered the parts and received them promptly . Turns out I ordered the wrong parts and your return process was again outstanding. I would recommend etrailer.com to anyone who needs trailer products of any kind and I will be calling you back first, the next time I need anything. Great doing business with professionals. I cannot thank you enough.
Richard G.
The package was delivered a day before the promised date, and the parts were as advertised. The service was fast, and the follow-up was amazing. I will return to etrailer for any parts I need in the future.
I ordered 2 of the 1-1/4" receivers, and am adding both to the existing hitch on my truck so that I can attach a 3-point frame that extends the "hitch" out past my camper so that I can safely pull my horse trailer with the camper mounted on the truck.
A couple of these welded to my trailer bumper should support a utility cargo carrier I'm fabricating nicely. They are raw steel, beefy and will be powder coated with the bumper. I'll probably add another ( 1 1/4" or 2") for a bicycle carrier.
The USPS lost the first shipment. I called and etrailer quickly sent out a replacement.
We offer these one our Trip Trike motorcycle kits and our customers love them. We will continue to order in the future as the need arises. Thanks etrailer, you are our go to source for all our trailer needs.
Shipped quickly. I got just what I was looking for. All I needed was a light duty receiver to fabricate a bolt on to my small car (just need it for a bike rack and not to tow.) this is perfect.
Thanks
fast delivery
The combo bar is exactly as described. I plan to build a custom hitch for my motorcycle and it will be perfect.
I wanted to add a receiver hitch to my compact tractor. It had the usual flat bar sticking out the back and aside from getting in the way of some of my attachments it was of limited use. I didn't really want a two inch receiver, one and a quarter inch would handle everything I wanted to do. But everywhere I went in town they only had two inch receivers in stock. So I went on line and etrailer had what I wanted, the price was certainly right and shipping was fast. I shortened the original bar hitch (no more interference with my scoop) and added the receiver and can now use a variety of receiver hitch attachments.
I have ordered a couple items from E-Trailer. No complaints.
Shipping was on time.
Thanks
Keith
Excellent. I used this to fabricate a couple spare tire mounts on utility trailers. The tires were mounted on square stock that fit into the receiver
Awesome just what I needed to attach to a lawn garden tractor. They were honest and correct with their description of the item I ordered. I found nothing even close to this on E*** or on the net. For the money this is awesome.
Thanks for sending so quickly and well packaged.
Shawn500a
2/6/2018
awesome hitch
Product is exactly what I wanted. Plan to use to mount guide bunks on my party barge trailer. Will serve as guide for party barge when loading on steep ramps and a significant portion of the trailer is under water. Remove when traveling down the road.
Etrailer provided great service. Prompt delivery. Product and quantity were what was ordered. Price was good as well.
Thank you for the quality receiver. Sorry no picture yet. I'm having my local weld shop fabricate a hitch for my Yamaha 950 V Star motorcycle so I can pull my dog behind me on a small trailer to local parks. Having this will speed up the job and get my pup in the wind with me safely.
Very fast delivery and courteous service. I used this product on the front end of my John Deere 6X4 Gator (had it welded to a custom winch mount) and, after shortening it a bit, it works great. Thanks for the great prices e-trailer!
Fast delivery, I plan on welding this receiver under the current hitch bar, so I can plug the three flag holder from my motorcycle into this receiver on my Cushman "Meter Maid" for parade use.
Hi, I received both of the products I had ordered. I was pleased that I was able to enter my online order from home over the weekend. And I received my products today even with the holiday yesterday.
I have not installed these yet but they are exactly what I was after and will fit my requirement just right.
Order entry and processing without issue, receipt on time, and the correct products, thank you.
Nice constructed receiver, smooth interior so hitch slides easily. Does have the same rust as pictured (not a concern for me but don't expect a rust free bare metal product).
HITCH RECIVERS WERE AS SHOWN ONLINE. WELL MADE AND FIT CORRECTLY.
THANK YOU
I got tangled up in ordering online (my problem), but a call got me directly to the rep. He did a great job with the completing it, explaining, and sending email confirmation. In less than 48 hours the goods were at my front door! How does that happen the week before Christmas?! Great job etrailer, you're tending to business just right!
Do you have a question about this Hitch Fabrication Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mat
12/26/2015
Love it!! ????