bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: DT24959
In Stock
$186.98
Retail:$300.14
You Save: $113.16
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number DT24959 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (158)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - DT24959

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24959 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe - 1-1/4"

Replaces 24886

Installation Details DT24959 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - DT24959

Average Customer Rating:  4.8 out of 5 stars   (158 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

The item was shipped on time, and specs were precisely as indicated on the website. The install perfectly followed the online instructional videos. All went smoothly. Hitch mounted bike rack is now installed, in use!

Mark

8/11/2023

perfect still after one year



by:

Easy install, works great for my bike rack and even a small trailer

Scott S.

7/15/2024

Works exactly as advertised, used for light towing and a bike rack. Would absolutely purchase again



by:
2012 Subaru Impreza

Fits snugly under bumper. I had it installed for me, so can't comment on the installation process. Just what I needed! Swagman bike rack and Draw Tite hitch are well made and very sturdy.

Subaru R.

7/20/2018

All working well



by:

Overall trailer hitch is as advertised. Good quality construction/ welds look good. Priced right. Shipped OK/ arrived no issues.
Installation was a bit tough. Videos were extremely helpful and a must to understand the order of bolt/ spacer block installation. The written instructions were of no help just to verify torque settings.
Two points of issue. The forward most bolt (one drivers side/ one passengers side) is juuuusssst that much too short. The kit supplied 4 -1.5" grade 5 carriage bolts but there really should be 2 - 1.75" or 2" bolts for those forward most holes because once you add the flat washer + the lock washer + the spacer in the frame and the spacer between the frame/ hitch it is impossible to screw the nut on. See attached pictures
Also, once installed and put to use, the Thule bike rack bolt that goes thru the hitch could not be tightened w/ the Thule wrench. The trailer hitch chain loops would not allow. A ratchet w/ 3/4" socket will need to be kept in the car for the Mrs to tighten when using the bike rack.
Hitch looks good and is installed and operational. Thank you



by:
2013 Subaru Impreza

Great price for this unit! Installation was also very straight forward. I didn’t have any issues with fitment on my 2013 Impreza hatchback. It’s very useful to have and is also a discrete fit under the rear bumper as well.



by:
Chevrolet Colorado

A solid hitch that the do-it-yourselfer can install. Bolted right onto the daughter's Subaru. Bike rack has never been out of the hitch since the install(the bike gets keep in the car sometimes for safety!) Very happy customer! Since college graduation last spring- car, hitch, bike rack, and bike have been from Maine to California with Utah and Colorado stops and now a job in Vermont! Everything works great! Thanks for a great product making people happy.



by:

Clean fit. Great [online]videos demonstrating installation.

Shawn

7/17/2023

No complaints. Tows boat trailer without any problems.



by:
2017 Subaru XV Crosstrek

Product shipped fast but packaging could be a little better. The box was heavy duty but the hitch was put in there with no secondary protection so it arrived scuffed up from the cardboard. There were also a fair amount of chips in the paint but I run a powder coat shop and blasted it and applied a zinc primer anyways to withstand the salt and brines they put on our Minnesota roads in the winter so this didn't bother me. The factory powder coat on this was pretty average but I understand not everyone is willing to shell out extra cash for better paint and just want a functional hitch for a fair price. Installation was straightforward and a breeze. No need to drill any extra holes on my 2017 Crosstrek. Two people make mounting the hitch a lot easier so you don't knock the bolts back into the frame rail. Overall fit was spot on and should do me just fine.



by:
2016 Subaru Crosstrek

Great hitch for Subaru Crosstrek. I use it to put a tray style bike rack on the back. Easy install, I had no issues with the length of the bolts as other customers have mentioned. Also did not have to drill out the holes in the frame on my 2016 Crosstrek. Included bolt fishing wire makes it a breeze to install. If you do it solo, might want to have a hydraulic jack to hold the hitch in place while you bolt it on. Have not tried it for towing, but it looks like it's built solid. Arrived super quickly from etrailer.com, highly recommend!



by:
2017 Subaru Impreza

Excellent product. Fits perfect for the 2017 Impreza. Could be a bit more snug up to the bumper but very happy with it overall. The front bolt could be longer as others have mentioned. I would suggest installing the rear bolts first and then the front ones.
Also, wish the receiver stop was a bit further back so that my rack would sit closer to the bumper, but overall very happy with it.



by:
2008 Subaru Impreza

2008 impreza 2.5i (non turbo). Great fit. No hole cutting required. Exhaust drop is best done with a helper. Video on [online] is very helpful. I recommend raising rear end with ramps or lift.



by:
2015 Subaru Impreza

Bolted on easily and was a perfect fit. I put it on a 2015 Subaru impreza and use ito tow a 5x8 ft trailer .



by:

Installation instructions were good. Took about 1.5hrs to install. You will need a second set of hands. Works great. No issues. Good price. Fit my Subaru Impreza perfectly.

Stuart S.

9/6/2020

Works great. Ive used it multiple times. No issues



by:

Happy with my hitch :) The product was relatively easy to install, it took two of us about 1.5 hours to finish. I'm using it for my bike rack and it fits my 1.25" yakima "hold up" perfectly. I was worried that it would be too close to the car or too low to the ground, but I haven't had any problems.



by:
2015 Subaru Impreza

Hitch arrived promptly; installation was not difficult and the 'how-to' video was invaluable.



by:
2015 Subaru Impreza

I haven't installed the part yet, however the part came in delivered with no packing material but the cardboard box to protect the part. The powder coat finish was chipped off in several areas so I'll have to touch up with paint to prevent any future rust. There was was also a blob of powder coat piled up in one area that won't be visible when installed, however it just looks unappealing.



by:
2016 Subaru Impreza

Product DT24959 Really easy to install. Watching the video on their website is all the information you need to install trailer hitch. I was lucky to have access to a gas station lift and a second person to hold unit in place while I bolted unit on. We left off the spacer (item 6) maybe needed for different model of car also no need to lower muffler on 2016 Subaru Impreza.



by:

The hitch installed easily and fit as expected. It took me about 90 minutes to install it myself. I did have to remove 2 of the plastic body fasteners under the bumper on the driver's side of the car to free up the plastic panel underneath. It was interfering with installing the hitch. I put the fasteners back in after the hitch was installed. The plastic panel rests against the hitch, but it isn't an issue.



by:

So happy with this hitch and this company!! Great prices, fast shipping and most importantly... excellent product. Great instructions. Great fitment. It took me about an hour because I did it solo with the help of the Jack. This hitch fits tucked under so nicely. I highly recommend this company and this product. Thank you!!



by:

Ordered on a Wednesday and it arrived on a Friday. Excellent service



by:
2017 Subaru Crosstrek

Very nice hitch. Easy to put on. Instructions were spot on. We use it with a bike rack.



by:

This worked wonderfully for our Subaru Crosstrek. I was able to install it myself and we have used it many times over the last year. We have a Thule bike rack that holds 2 bikes and we have taken our bikes to the river and beach several times.

Gaspar

4/28/2023

This has held up great over the year. All the bolts are still tight and there is no rust so it still looks the same.



by:
2012 Subaru Impreza

The trailer hitch fit perfectly. Great video and written instructions. I didn't initially lower the muffler until it became clear I couldn't properly torque one of the nuts until I did. Great product and support!



by:

Good Product. I am a guy that likes a challenge although this wasen't much of one.. easy instructions, straight forward application and tools this was a fun project. my best advice would be if you're putting together a project of sorts make sure you speak to a rep before you order, that way all the parts you order work well together..



by:

Eases of install. took me a whole 45 mins. Definitely helps to have a second set of hands to hold the hitch in place. Highly recommend for a 2014 Impreza/crosstrek

John

5/21/2023

Still solid as expected. Still able to use my bike rack or my basket on my Impreza hasn’t failed sold bike rack


25
158
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Is There a 2" Trailer Hitch for a 2010 Subaru WRX
    The only trailer hitch options we offer for a 2010 Subaru WRX with single exhaust are class I, 1-1/4" like the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 which is what I recommend. However, hitches are only designed for factory exhaust so if you have aftermarket you may run into issues and need to make modifications. If you need the larger receiver then your only options are using an adapter, the Trailer Hitch Adapter part # e93YR. I checked with EcoHitch but the EcoHitch...
    view full answer...
  • Availability of Replacement Hardware for Draw Tite Trailer Hitch 24959
    We do sell replacement hardware for all of the hitches we carry including the # DT24959 you referenced with the part # RHK. You'd just need to select the hitch manufacturer from the drop down menu and also enter the part number of your hitch and we'd get you the correct hardware.
    view full answer...
  • Trailer Hitch Receiver for a 2016 Subaru Impreza Hatchback That Uses Center Knockout Panel
    The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7211 as the name states is almost completely concealed once installed. It installs behind the rear bumper and the receiver tube opening will be located behind the center knockout panel. It is however only offered in a 2" receiver tube opening. If you can tell me which bike rack you have I would be glad to see if they have a specific 1-1/4" to 2" adapter but if not you can use part # HT02. The other two trailer hitch receiver options...
    view full answer...
  • Why is Power Wire Run to Battery For Wiring Harness 118573 on 2016 Subaru Impreza
    The reason you need to run a power wire to the battery of your 2016 Subaru Impreza is to power the module of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118573. This allows it to draw power directly from the battery to bypass the electrical systems, so there is virtually no draw on your tail lights so they are protected from shorting out. I have added a link below to a help article which details the best way to route a power wire. Additionally, if you also need...
    view full answer...
  • Trailer Hitch That Fits 2013 Subaru Impreza Sedan
    While there is a trailer hitch that fits a 2013 Subaru Impreza sedan the # DT24959 you referenced only fits an Impreza 5-door wagon with a single exhaust. Instead you will need Curt Trailer Hitch # C11408 UNLESS your '13 Impreza sedan is a WRX or WRX STi model; if that is the case you will need Curt Trailer Hitch # C11317. Both of these are Class I hitches with a 1-1/4" receiver and complete bolt-on installations so you will not have to drill into your Subaru's frame.
    view full answer...
  • Comparing Draw-Tite DT24959 and Curt C11286 Class I Hitches for 2014 Subaru Impreza Wagon
    For your 2014 Subaru Impreza Wagon with single exhaust we do offer the Class I hitches # DT24959 from Draw-Tite and # C11286 from Curt. Both of these are a fit for your car so long as it is NOT the WRX or WRX STi. Both of these Class I hitches have a 1-1/4-inch receiver opening and offer identical weight ratings of 200-lbs tongue weight (TW) which is downward force on the hitch and towing weight of 2000-lbs. Please note these hitch ratings may exceed the same ratings for the car itself. In...
    view full answer...
  • Will EcoHitch Stealth Trailer Hitch Receiver 306-X7261 Fit 2011 Subaru Impreza W/ Single Exhaust?
    I may have another option for you, but the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # 306-X7261 you were looking at will only fit the 2008-2011 Subaru Impreza 5-door Wagon with the Quad Exhaust and will not work on your Impreza as your vehicle only has the single exhaust. The only trailer hitch receivers available for the single exhaust models will be visible and do not have a removeable receiver like the # 306-X7261. Of the available options I recommend the Draw-Tite...
    view full answer...
    Image 1 for
  • Trailer Hitch for 2012 Subaru Impreza to Allow Use of Thule T2 Pro Bike Rack
    There are trailer hitches that will allow you to use a Thule T2 Pro on your 2012 Subaru Impreza but the EcoHitch Invisi Trailer Hitch # 306-X7211 is not a good option. The reason for that is this hitch installs inside the bumper and requires you to remove the small knockout panel on the rear of your single-exhaust, 5-door Impreza. Further, this hitch only allows the use of bike racks with stingers/shanks that extend a maximum of 2-3/8" from the center of the hitch pin hole to the end of...
    view full answer...
    Image 1 for
  • Can Yakima HoldUp Bike Rack be Used on a 2017 Subaru Impreza with a Class I Trailer Hitch Receiver
    I'm afraid your husband is correct to be concerned. The trailer hitch receivers we carry for your Impreza, like the Draw-Tite # DT24959, are all Class I hitches and will need an expander to fit the Yakima HoldUp for 2 Inch Hitch Receivers # Y02443. Using an expander, like the Brophy # HTAD, will give you a 2 inch receiver opening but it will also reduce your hitch's tongue weight capacity by 50 percent. That puts your maximum tongue weight at no more than 100 pounds using the Draw-Tite...
    view full answer...
  • Why is There Hitch for 2024 Subaru Impreza if it Can't Tow
    We have hitches for vehicles like your 2024 Subaru Impreza like the Draw Tite # DT24959 that aren't rated for towing because for lighter duty vehicles you can still carry bike racks and cargo carriers. There's also people who go against the recommendations and still tow.
    view full answer...
  • Ground Clearance Comparison of Draw-Tite and Curt Trailer Hitch Receivers on 2018 Subaru Impreza
    The Curt Class I Trailer Hitch Receiver # C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver # DT24959, and Draw-Tite Class II Trailer Hitch Receiver # 36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018 Subaru Impreza. Due to that I recommend the Draw-Tite Class II Trailer Hitch Receiver # 36644 which is a stronger trailer hitch receiver capable of a maximum tongue weight of 350lbs, and a maximum trailer weight of 3500lbs. The Draw-Tite...
    view full answer...
  • Replacement Hardware Kit for Draw-Tite Class I Hitch # DT24959
    No problem, I can certainly help you there. On the top right hand corner of our home page, you will see a search box. Simply type in RHK (for "Replacement Hardware Kit") into the search box. Once you are on the RHK product page, simply type in the hitch part number in the provided field and select the hitch manufacturer from the drop down menu. We well set you up with the complete hardware kit for the hitch, which will be compatible with your Impreza Wagon as long as it has the single exhaust. I...
    view full answer...
    Image 1 for
  • How To Carry Carbon Fiber Bike On 2018 Subaru Impreza
    Correct, you don't want a bike rack with frame contact with carbon fiber frame bikes. The only type of tire hold bikes are hitch mounted so you will first need to start with a trailer hitch, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959. Then, you can pick out a tire hold rack such as the Kuat Transfer V2 Bike Rack for 2 Bikes part # KU74FR which is what I recommend.
    view full answer...
  • Are There Any Ground Clearance Issues When Draw-Tite # DT24959 is Installed on a 2017 Subaru Impreza
    Although we haven't had a chance to test fit and shoot a video of the the Draw-Tite Sportframe Trailer Hitch Receiver # DT24959 on a 2017 Subaru Impreza, I was able to go to the warehouse and get some measurements for you. From the top of the frame brackets to the bottom of the coupler is about 9-1/2". If you check out the attached installation instructions you can use both to see about where the bottom of the coupler will sit on your Impreza. Hearing stories about ground clearance...
    view full answer...
    Image 1 for
  • Hitch for 2009 Subaru Impreza WRX Hatchback That Fits with Aftermarket Exhaust
    All hitch makers base their designs on a vehicle's stock exhaust setup. There are just too many aftermarket items to allow them to do testing to confirm hitch compatibility with a car that has one of these. Draw-Tite hitch # DT24959 and Curt # C11315 both fit the WRX hatchback with stock single exhaust as long as they are not the STi. EcoHitch # 306-X7261 does not fit your car. To help you check the fit with your exhaust I took a measurement of the Draw-Tite hitch. I measured from the...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch On 2016 Subaru Crosstrek for Best Ground Clearance
    For your 2016 Subaru Crosstrek, the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7203 has the best ground clearance and only fits vehicles with the center knock-out panel in the bumper. The next best ground clearance is in the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT24959 which at the lowest point will give you 13 inches ground clearance. This is about an inch more clearance than the 2 inch # e98838 which will give...
    view full answer...
  • Is The Draw-Tite Trailer Hitch # DT24959 a Fit for a 2018 Subaru Crosstrek?
    I reached out to my contact at Draw-Tite and the Class I - 1-1/4" # DT24959 is a confirmed fit for models through 2017. The Class III -2 inch # 76084 is also a confirmed fit for models through 2017. They have not yet (as of Sept 2017) confirmed the fit for 2018 model years of the Subaru Crosstrek.
    view full answer...
  • Parts Included with the Draw-Tite Trailer Hitch # 24886 for a 2008 Subaru Impreza
    The Draw-Tite Class I Trailer Hitch, # DT24959, does not come with a ball mount. You will need to order one. To add a hitch ball, you will first want to determine the size of hitch ball that your trailer requires. You can use a 1-7/8 inch hitch ball, # 19256, or a 2 inch hitch ball, # 19258. Please note, this hitch will fit your 2008 Subaru Impreza as long as it is the hatchback model with single exhaust. This hitch will not fit the WRX STi models. If your Impreza is a sedan, not STi...
    view full answer...
  • Correct Trailer Hitch Receiver and 4-Way Wiring For a 2011 Subaru Impreza Hatchback Single Exhaust
    You hit the nail on the head with those Landon. Both the Curt # C11315 and Draw-Tite # DT24959 are going to fit your 2011 Subaru Impreza hatchback with the single exhaust outlet. I recommend the Curt as a better option since the receiver is manufactured here in the US. For the wiring you should go with the Curt # C56111 as it uses factory style connectors to splice into the tail light wiring. The Curt # C59236 is a universal option but must be spliced into the factory wiring.
    view full answer...
  • Recommended Trailer Hitch 2019 Subaru Impreza 5 Door Wagon
    There are several choices available, but the correct hitch for you will depend on how concealed you'd like the hitch to be. For a 5 door wagon (single exhaust-equipped models only), you can go with a 2 inch receiver, which I'd recommend. You'll have much greater flexibility when choosing hitch mounted accessories such as a cargo carrier or bike rack. If you want a hitch that's completely concealed except for the square receiver tube, the EcoHitch # 306-X7350 would be a perfect choice....
    view full answer...
  • Best Trailer Hitch Receiver for 2015 Subaru Impreza Hatchback
    We carry one 2 inch trailer hitch receiver to fit your 2015 Subaru Impreza, the EcoHitch, part # 306-X7211. However, it only fits if your vehicle has the knock out panel on the rear bumper. If your Impreza doesn't have a knock out panel then you're going to need a 1-1/4 inch hitch which I suggest the Draw-Tite Sportframe Class I # DT24959 since you have the hatchback and not a sedan. This way you will not need the support straps like is necessary with the Curt. An option to use the...
    view full answer...
  • Why Won't Cargo Carrier Shank Fit Into Class I Trailer Hitch On 2019 Subaru Impreza
    It sounds like you have a Class I Trailer Hitch like the Draw-Tite # DT24959 installed on your 2017 Subaru Impreza. Certain Class I trailer hitches like this one feature a tab inside the receiver that prevents higher class accessories from fitting properly. This was done by the manufacturer to prevent the trailer hitch and vehicle from being overloaded with higher class/heavier carriers or bike racks. Your existing Cargo Carrier is most likely a Class II or higher accessory, which is why...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2010 Subaru Impreza 5-Door with Single Exhaust
    I do have an option for you, however the EcoHitch Stealth Trailer Hitch Receiver # 306-X7261 referenced in your question is only designed to fit the 2010 Subaru Impreza 5-Door Wagon with the quad exhaust. It will not fit your Impreza if it features the single exhaust. If you have the single exhaust on your Impreza the best trailer hitch available is the Draw-Tite Class I # DT24959 that will use existing holes in the vehicle's frame for a no-drill installation and doesn't require an additional...
    view full answer...
  • Trailer Hitch Receiver to Fit a 2010 Subaru Impreza Sport
    The Draw-Tite # 76084 is for later model Subaru Crosstreks and XV Crosstreks but will not fit your Impreza. The only Draw-Tite hitch receivers we have for your vehicle are Class I like the Draw-Tite # DT24959. I've linked the install video for you.
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.